jasmine/nix-config
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

setup irc network

Browse source
This commit is contained in:
♥ Minnie ♥ 2025-06-06 18:31:08 +08:00
parent f7fcccac4a
commit 7b981cc126
Signed by: jasmine
GPG key ID: 8563E358D4E8040E
5 changed files with 695 additions and 3 deletions
Download patch file Download diff file Expand all files Collapse all files

7
nixos/viridian/configuration.nix
View file

@ -24,9 +24,10 @@
enable = true;
allowPing = true;
allowedTCPPorts = [
80
443
6600
80 # http
443 # https
6600 # mpd
6667 # inspircd
];
};
};

1
nixos/viridian/services/default.nix
View file

@ -3,6 +3,7 @@
./borgbackup
./crowdsec
./forgejo
./inspircd
./jupyterhub
./lighttpd
./minecraft

10
nixos/viridian/services/inspircd/default.nix Normal file
View file

@ -0,0 +1,10 @@
{...}: {
services.inspircd = {
enable = true;
config = builtins.readFile ./inspircd.conf;
};
environment.etc = {
"inspircd/inspircd.motd".source = ./inspircd.motd;
};
}

643
nixos/viridian/services/inspircd/inspircd.conf Normal file
View file

@ -0,0 +1,643 @@
#-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
# #
# Here is where you enter the information about your server. #
# #
<server
# name: Hostname of your server. Does not need to resolve, but
# does need to be correct syntax (something.somethingelse.tld).
name="irc.home.arpa"
# description: Server description. Spaces are allowed.
description="Private Network!"
# id: The SID to use for this server. This should not be uncommented
# unless there is a SID conflict. This must be three characters long.
# The first character must be a digit [0-9], the remaining two chars
# may be letters [A-Z] or digits.
#id="97K"
# network: Network name given on connect to clients.
# Should be the same on all servers on the network.
network="Kanto">
#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Describes the Server Administrator's real name (optionally), #
# nick, and email address. #
# #
<admin
# name: Real Name
name="Jasmine Marie Wilson"
# nick: Nickname (preferably what you use on the network)
nick="sajenim"
# email: email address. Does not have to be valid
# but should be for the users to be able to contact you.
email="its.jassy@pm.me">
#-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
# #
# Configure the port and address bindings here. #
# #
<bind
# address: IP address to bind to if the box that you are hosting
# on has more than one IP, else the ircd will try to bind to all
# IP's on the box if this is not defined.
address=""
# port: Port for users or servers to be able to connect to.
# you can select multiple ports by separating them
# with a - character like the example below.
port="6667"
# type: Type of bind block this is. It can either be clients or
# servers. Whichever you select will be the only type able to connect
# to this bind section.
type="clients"
# free: When this is enabled the listener will be created regardless of
# whether the interface that provides the bind address is available. This
# is useful for if you are starting InspIRCd on boot when the server may
# not have brought the network interfaces up yet.
free="no">
#-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# This is where you can configure which connections are allowed #
# and denied access onto your server. The password is optional. #
# You may have as many of these as you require. To allow/deny all #
# connections, use a '*' or 0.0.0.0/0. #
# #
# -- It is important to note that connect tags are read from the -- #
# TOP DOWN. This means that you should have more specific deny #
# and allow tags at the top, progressively more general, followed #
# by a <connect allow="*"> (should you wish to have one). #
# #
# Connect blocks are searched twice for each user - once when the TCP #
# connection is accepted, and once when the user completes their #
# registration. Most of the information (hostname, ident response, #
# password, TLS (SSL) when using STARTTLS, etc) is only available #
# during the second search. If you are trying to make a closed server #
# you will probably need a connect block just for user registration. #
# This can be done by using <connect registered="no"> #
<connect
# name: Name to use for this connect block. Mainly used for
# connect class inheriting.
name="main"
# allow: The IP address or hostname of clients that can use this
# class. You can specify either an exact match, a glob match, or
# a CIDR range here.
allow="*"
# maxchans: Maximum number of channels a user in this class
# can be in at one time.
maxchans="20"
# timeout: How long the server will wait before disconnecting
# a user if they do not do anything on connect.
# (Note, this is a client-side thing, if the client does not
# send /NICK, /USER or /PASS)
timeout="20"
# pingfreq: How often the server tries to ping connecting clients.
pingfreq="2m"
# hardsendq: maximum amount of data allowed in a client's send queue
# before they are dropped. Keep this value higher than the length of
# your network's /LIST or /WHO output, or you will have lots of
# disconnects from sendq overruns!
# Setting this to "1M" is equivalent to "1048576", "8K" is 8192, etc.
hardsendq="1M"
# softsendq: amount of data in a client's send queue before the server
# begins delaying their commands in order to allow the sendq to drain
softsendq="10240"
# recvq: amount of data allowed in a client's queue before they are dropped.
# Entering "10K" is equivalent to "10240", see above.
recvq="10K"
# threshold: This specifies the amount of command penalty a user is allowed to have
# before being quit or fakelagged due to flood. Normal commands have a penalty of 1,
# ones such as /OPER have penalties up to 10.
#
# If you are not using fakelag, this should be at least 20 to avoid excess flood kills
# from processing some commands.
threshold="10"
# commandrate: This specifies the maximum rate that commands can be processed.
# If commands are sent more rapidly, the user's penalty will increase and they will
# either be fakelagged or killed when they reach the threshold
#
# Units are millicommands per second, so 1000 means one line per second.
commandrate="1000"
# fakelag: Use fakelag instead of killing users for excessive flood
#
# Fake lag stops command processing for a user when a flood is detected rather than
# immediately killing them; their commands are held in the recvq and processed later
# as the user's command penalty drops. Note that if this is enabled, flooders will
# quit with "RecvQ exceeded" rather than "Excess Flood".
fakelag="yes"
# localmax: Maximum local connections per IP.
localmax="3"
# globalmax: Maximum global (network-wide) connections per IP.
globalmax="3"
# resolvehostnames: If disabled, no DNS lookups will be performed on connecting users
# in this class. This can save a lot of resources on very busy servers.
resolvehostnames="yes"
# useident: Whether to try to look up the real username of users in this class using
# the RFC 1413 identification protocol.
# This setting only has effect when the ident module is loaded.
useident="no"
# usests: Whether a STS policy should be advertised to users in this class.
# This setting only has effect when the ircv3_sts module is loaded.
#usests="no"
# limit: How many users are allowed in this class
limit="5000"
# modes: The modes to set on users in this class when they connect to
# the server. See https://docs.inspircd.org/3/user-modes/ for a list of
# user modes. The example below sets user modes c (deaf_commonchans)
# and x (cloak) which require the commonchans and cloak modules.
# This setting only has effect when the conn_umodes module is loaded.
modes="+cx">
#-#-#-#-#-#-#-#-#-#-#-#- CIDR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
# #
# CIDR configuration allows detection of clones and applying of #
# throttle limits across a CIDR range. (A CIDR range is a group of #
# IPs, for example, the CIDR range 192.168.1.0-192.168.1.255 may be #
# represented as 192.168.1.0/24). This means that abuse across an ISP #
# is detected and curtailed much easier. Here is a good chart that #
# shows how many IPs the different CIDRs correspond to: #
# https://en.wikipedia.org/wiki/IPv4_subnetting_reference #
# https://en.wikipedia.org/wiki/IPv6_subnetting_reference #
# #
<cidr
# ipv4clone: specifies how many bits of an IP address should be
# looked at for clones. The default only looks for clones on a
# single IP address of a user. You do not want to set this
# extremely low. (Values are 0-32).
ipv4clone="32"
# ipv6clone: specifies how many bits of an IP address should be
# looked at for clones. The default only looks for clones on a
# single IP address of a user. You do not want to set this
# extremely low. (Values are 0-128).
ipv6clone="128">
#-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# Files block - contains files whose contents are used by the ircd
#
# motd - displayed on connect and when a user executes /MOTD
# Modules can also define their own files
<files motd="/etc//inspircd/inspircd.motd">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# If these values are not defined, InspIRCd uses the default DNS resolver
# of your system.
<dns
# timeout: time to wait to try to resolve DNS/hostname.
timeout="5">
#-#-#-#-#-#-#-#-#-#-#-#-#- LIST MODE LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# The <maxlist> tag is used customise the maximum number of each list #
# mode that can be set on a channel. #
# The tags are read from top to bottom and the list mode limit from #
# the first tag found which matches the channel name and mode type is #
# applied to that channel. #
# It is advisable to put an entry with the channel as '*' at the #
# bottom of the list. If none are specified or no maxlist tag is #
# matched, the banlist size defaults to 100 entries. #
# #
# Allows all channels and list modes not previously matched to have
# up to 100 entries.
<maxlist chan="*" limit="100">
#-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Settings to define which features are usable on your server. #
# #
<options
# prefixquit: What (if anything) users' quit messages
# should be prefixed with.
prefixquit="Quit: "
# suffixquit: What (if anything) users' quit messages
# should be suffixed with.
suffixquit=""
# prefixpart: What (if anything) users' part messages
# should be prefixed with.
prefixpart="&quot;"
# suffixpart: What (if anything) users' part message
# should be suffixed with.
suffixpart="&quot;"
# fixedquit: Set all users' quit messages to this value.
#fixedquit=""
# fixedpart: Set all users' part messages in all channels
# to this value.
#fixedpart=""
# syntaxhints: If enabled, if a user fails to send the correct parameters
# for a command, the ircd will give back some help text of what
# the correct parameters are.
syntaxhints="no"
# casemapping: This sets the case mapping method to be used by the
# server. This MUST be the same on all servers. Possible values are:
# "ascii" (recommended)
# "rfc1459" (default, required for linking to 2.0 servers)
casemapping="ascii"
# cyclehostsfromuser: If enabled, the source of the mode change for
# cyclehosts will be the user who cycled. This can look nicer, but
# triggers anti-takeover mechanisms of some obsolete bots.
cyclehostsfromuser="no"
# announcets: If set to yes, when the timestamp on a channel changes, all users
# in the channel will be sent a NOTICE about it.
announcets="yes"
# allowmismatch: Setting this option to yes will allow servers to link even
# if they don't have the same "optionally common" modules loaded. Setting this to
# yes may introduce some desyncs and unwanted behaviour.
allowmismatch="no"
# defaultbind: Sets the default for <bind> tags without an address. Choices are
# ipv4 or ipv6; if not specified, IPv6 will be used if your system has support,
# falling back to IPv4 otherwise.
defaultbind="auto"
# hostintopic: If enabled, channels will show the host of the topic setter
# in the topic. If set to no, it will only show the nick of the topic setter.
hostintopic="yes"
# pingwarning: If a server does not respond to a ping within this period,
# it will send a notice to opers with snomask +l informing that the server
# is about to ping timeout.
pingwarning="15"
# serverpingfreq: How often pings are sent between servers.
serverpingfreq="1m"
# splitwhois: Whether to split private/secret channels from normal channels
# in WHOIS responses. Possible values for this are:
# 'no' - list all channels together in the WHOIS response regardless of type.
# 'split' - split private/secret channels to a separate WHOIS response numeric.
# 'splitmsg' - the same as split but also send a message explaining the split.
splitwhois="no"
# defaultmodes: The modes to set on a channel when it is created. See
# https://docs.inspircd.org/3/channel-modes/ for a list of channel
# modes. If a prefix mode is included in this option it will be set on
# the user that created the channel. The example below sets channel
# modes n (noextmsg) and t (topiclock) and grants channel prefix mode
# o (op) to the channel creator.
defaultmodes="not"
# xlinemessage: This is the text that is sent to a user when they are
# banned from the server.
xlinemessage="You're banned! Email irc@example.com with the ERROR line below for help."
# allowzerolimit: If enabled then allow a limit of 0 to be set on channels.
# This is non-standard behaviour and should only be enabled if you need to
# link with servers running 2.0. Defaults to yes.
allowzerolimit="no"
# modesinlist: If enabled then the current channel modes will be shown
# in the /LIST response. Defaults to yes.
modesinlist="no"
# exemptchanops: Allows users with with a status mode to be exempt
# from various channel restrictions. Possible restrictions are:
# - anticaps Channel mode +B - blocks messages with too many capital
# letters (requires the anticaps module).
# - auditorium-see Permission required to see the full user list of
# a +u channel (requires the auditorium module).
# - auditorium-vis Permission required to be visible in a +u channel
# (requires the auditorium module).
# - blockcaps Channel mode +B - blocks messages with too many capital
# letters (requires the blockcaps module).
# - blockcolor Channel mode +c - blocks messages with formatting codes
# (requires the blockcolor module).
# - censor Channel mode +G - censors messages based on the network
# configuration (requires the censor module).
# - delaymsg Channel mode +d - blocks sending messages until specified
# seconds have passed since user join
# - filter Channel mode +g - blocks messages containing the given
# glob mask (requires the chanfilter module).
# - flood Channel mode +f - kicks (and bans) on text flood of a
# specified rate (requires the messageflood module).
# - nickflood Channel mode +F - blocks nick changes after a specified
# rate (requires the nickflood module).
# - noctcp Channel mode +C - blocks any CTCPs to the channel
# (requires the noctcp module).
# - nonick Channel mode +N - prevents users on the channel from
# changing nicks (requires the nonicks module).
# - nonotice Channel mode +T - blocks /NOTICEs to the channel
# (requires the nonotice module).
# - regmoderated Channel mode +M - blocks unregistered users from
# speaking (requires the services account module).
# - stripcolor Channel mode +S - strips formatting codes from
# messages (requires the stripcolor module).
# - topiclock Channel mode +t - limits changing the topic to (half)ops
# You can also configure this on a per-channel basis with a channel mode and
# even negate the configured exemptions below.
# See exemptchanops in modules.conf.example for more details.
exemptchanops="censor:o filter:o nickflood:o nonick:v regmoderated:o"
# invitebypassmodes: This allows /INVITE to bypass other channel modes.
# (Such as +k, +j, +l, etc.)
invitebypassmodes="yes"
# nosnoticestack: This prevents snotices from 'stacking' and giving you
# the message saying '(last message repeated X times)'. Defaults to no.
nosnoticestack="no">
#-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#
# #
<performance
# netbuffersize: Size of the buffer used to receive data from clients.
# The ircd may only read this amount of text in 1 go at any time.
netbuffersize="10240"
# somaxconn: The maximum number of connections that may be waiting
# in the accept queue. This is *NOT* the total maximum number of
# connections per server. Some systems may only allow this to be up
# to 5, while others (such as Linux and *BSD) default to 128.
# Setting this above the limit imposed by your OS can have undesired
# effects.
somaxconn="128"
# softlimit: This optional feature allows a defined softlimit for
# connections. If defined, it sets a soft max connections value.
softlimit="12800"
# clonesonconnect: If this is set to no, we won't check for clones
# on initial connection, but only after the DNS check is done.
# This can be useful where your main class is more restrictive
# than some other class a user can be assigned after DNS lookup is complete.
# Turning this option off will make the server spend more time on users we may
# potentially not want. Normally this should be negligible, though.
# Default value is yes
clonesonconnect="yes"
# timeskipwarn: The time period that a server clock can jump by before
# operators will be warned that the server is having performance issues.
timeskipwarn="2s"
# quietbursts: When syncing or splitting from a network, a server
# can generate a lot of connect and quit messages to opers with
# +C and +Q snomasks. Setting this to yes squelches those messages,
# which makes it easier for opers, but degrades the functionality of
# bots like BOPM during netsplits.
quietbursts="yes">
#-#-#-#-#-#-#-#-#-#-#-# SECURITY CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
# #
<security
# allowcoreunload: If this value is set to yes, Opers will be able to
# unload core modules (e.g. core_privmsg).
allowcoreunload="no"
# announceinvites: This option controls which members of the channel
# receive an announcement when someone is INVITEd. Available values:
# 'none' - don't send invite announcements
# 'all' - send invite announcements to all members
# 'ops' - send invite announcements to ops and higher ranked users
# 'dynamic' - send invite announcements to halfops (if available) and
# higher ranked users. This is the recommended setting.
announceinvites="dynamic"
# hideulines: If this value is set to yes, U-lined servers will
# be hidden from non-opers in /LINKS and /MAP.
hideulines="no"
# flatlinks: If this value is set to yes, /MAP and /LINKS will
# be flattened when shown to non-opers.
flatlinks="no"
# hidebans: If this value is set to yes, when a user is banned ([KGZ]-lined)
# only opers will see the ban message when the user is removed
# from the server.
hidebans="no"
# hidekills: If defined, replaces who executed a /KILL with a custom string.
hidekills=""
# hideulinekills: Hide kills from clients of ulined servers from server notices.
hideulinekills="yes"
# hidesplits: If enabled, non-opers will not be able to see which
# servers split in a netsplit, they will only be able to see that one
# occurred (If their client has netsplit detection).
hidesplits="no"
# maxtargets: Maximum number of targets per command.
# (Commands like /NOTICE, /PRIVMSG, /KICK, etc)
maxtargets="20"
# customversion: A custom message to be displayed in the comments field
# of the VERSION command response. This does not hide the InspIRCd version.
customversion=""
# restrictbannedusers: If this is set to yes, InspIRCd will not allow users
# banned on a channel to change nickname or message channels they are
# banned on. This can also be set to silent to restrict the user but not
# notify them.
restrictbannedusers="yes"
# genericoper: Setting this value to yes makes all opers on this server
# appear as 'is a server operator' in their WHOIS, regardless of their
# oper type, however oper types are still used internally. This only
# affects the display in WHOIS.
genericoper="no"
# userstats: /STATS commands that users can run (opers can run all).
userstats="Pu">
#-#-#-#-#-#-#-#-#-#-#-#-# LIMITS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
# #
# This configuration tag defines the maximum sizes of various types #
# on IRC, such as the maximum length of a channel name, and the #
# maximum length of a channel. These values should match network-wide #
# otherwise issues will occur. #
# #
# The highest safe value you can set any of these options to is 500, #
# but it is recommended that you keep them somewhat #
# near their defaults (or lower). #
<limits
# maxaway: Maximum length of an away message.
maxaway="200"
# maxchan: Maximum length of a channel name.
maxchan="60"
# maxhost: Maximum length of a hostname.
maxhost="64"
# maxident: Maximum length of a ident/username.
maxident="10"
# maxkick: Maximum length of a kick message.
maxkick="300"
# maxmodes: Maximum number of mode changes per line.
maxmodes="20"
# maxnick: Maximum length of a nickname.
maxnick="30"
# maxquit: Maximum length of a quit message.
maxquit="300"
# maxreal: Maximum length of a real name.
maxreal="130"
# maxtopic: Maximum length of a channel topic.
maxtopic="330">
#-#-#-#-#-#-#-#-#-#-#-#-# PATHS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
# #
# This configuration tag defines the location that InspIRCd stores #
# various types of files such as configuration files, log files and #
# modules. You will probably not need to change these from the values #
# set when InspIRCd was built unless you are using a binary package #
# where you do not have the ability to set build time configuration. #
#<path configdir="conf" datadir="data" logdir="logs" moduledir="modules">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Logging
# -------
#
# Logging is covered with the <log> tag, which you may use to change
# the behaviour of the logging of the IRCd.
#
# An example log tag would be:
# <log method="file" type="OPER" level="default" target="opers.log">
# which would log all information on /OPER (failed and successful) to
# a file called opers.log.
#
# There are many different types which may be used, and modules may
# generate their own. A list of useful types:
# - USERS - information relating to user connection and disconnection
# - OPER - successful and failed oper attempts
# - KILL - kill related messages
# - FILTER - messages related to filter matches (filter module)
# - CONFIG - configuration related messages
# - COMMAND - die and restart messages, and messages related to unknown user types
# - SOCKET - socket engine informational/error messages
# - MODULE - module related messages
# - STARTUP - messages related to starting up the server
#
# You may also log *everything* by using a type of *, and subtract things out
# of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT".
#
# Useful levels are:
# - default (general messages, including errors)
# - sparse (misc error messages)
# - debug (debug messages)
#
# Some types only produce output in the debug level, those are:
# - BANCACHE - ban cache debug messages
# - CHANNELS - information relating to joining/creating channels
# - CULLLIST - debug messages related to issues with removing users
# - RESOLVER - DNS related debug messages
# - CONNECTCLASS - Connection class debug messages
# - USERINPUT
# - USEROUTPUT
#
# If your server is producing a high levels of log messages you can also set the
# flush="[positive number]" attribute to specify how many log messages should be
# buffered before flushing to disk. You should probably not specify this unless
# you are having problems.
#
# The following log tag is highly default and uncustomised. It is recommended you
# sort out your own log tags. This is just here so you get some output.
<log method="file" type="* -USERINPUT -USEROUTPUT" level="default" target="ircd.log">
#-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# This tag lets you define the behaviour of the /WHOWAS command of #
# your server. #
# #
<whowas
# groupsize: Maximum entries per nick shown when performing
# a /WHOWAS <nick>.
groupsize="10"
# maxgroups: Maximum number of nickgroups that can be added to
# the list so that /WHOWAS does not use a lot of resources on
# large networks.
maxgroups="100000"
# maxkeep: Maximum time a nick is kept in the whowas list
# before being pruned. Time may be specified in seconds,
# or in the following format: 1y2w3d4h5m6s. Minimum is
# 1 hour.
maxkeep="3d">
#-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# This optional tag allows you to specify how wide a G-line, E-line, #
# K-line, Z-line or Q-line can be before it is forbidden from being #
# set. By setting hostmasks="yes", you can allow all G-, K-, E-lines, #
# no matter how many users the ban would cover. This is not #
# recommended! By setting ipmasks="yes", you can allow all Z-lines, #
# no matter how many users these cover too. Needless to say we #
# don't recommend you do this, or, set nickmasks="yes", which will #
# allow any Q-line. #
# #
<insane
# hostmasks: Allow bans with insane hostmasks. (over-reaching bans)
hostmasks="no"
# ipmasks: Allow bans with insane ipmasks. (over-reaching bans)
ipmasks="no"
# nickmasks: Allow bans with insane nickmasks. (over-reaching bans)
nickmasks="no"
# trigger: What percentage of users on the network to trigger
# specifying an insane ban as. The default is 95.5%, which means
# if you have a 1000 user network, a ban will not be allowed if it
# will be banning 955 or more users.
trigger="95.5">

37
nixos/viridian/services/inspircd/inspircd.motd Normal file
View file

@ -0,0 +1,37 @@
_____ _____ _____ _____ _
|_ _| |_ _| | __ \ / ____| | |
| | _ __ ___ _ __ | | | |__) || | __| |
| | | '_ \ / __| | '_ \ | | | _ / | | / _` |
_| |_ | | | | \__ \ | |_) | _| |_ | | \ \ | |____ | (_| |
|_____| |_| |_| |___/ | .__/ |_____| |_| \_\ \_____| \__,_|
_____________________| |__________________________________
|_____________________|_|__________________________________|
\iPowering IRC communities since 2006\x
/\ /\
{ `---' } \bWELCOME TO AN \c13I\c04N\c07S\c08P\c03I\c10R\c12C\c06D\c99 NETWORK\x
{ O O }
~~> V <~~ If you see this, I'm probably new.
\ \|/ / If I'm not new, my owner is lazy. ;-)
`-----'____
/ \ \_
{ }\ )_\_ _
| \_/ |/ / \_\_/ )
\__/ /(_/ \__/
(__/
+---- To change this see \bmotd.txt.example\x ----+
| |
| * \bWeb:\x https://www.inspircd.org |
| * \bIRC:\x ircs://irc.teranova.net/inspircd |
| * \bDocs:\x https://docs.inspircd.org |
| * \bIssues:\x https://git.io/JIuYi |
| * \bDiscussions:\x https://git.io/JIuYv |
| |
| We hope you like this software. Please do |
| make sure to customise your configuration, |
| though, so you love it. Enjoy. |
| |
| -- The InspIRCd Team |
+---------------------------------------------+