diff --git a/nixos/viridian/configuration.nix b/nixos/viridian/configuration.nix
index 078d937..a6e4b7e 100644
--- a/nixos/viridian/configuration.nix
+++ b/nixos/viridian/configuration.nix
@@ -24,9 +24,10 @@
       enable = true;
       allowPing = true;
       allowedTCPPorts = [
-        80
-        443
-        6600
+        80   # http
+        443  # https
+        6600 # mpd
+        6667 # inspircd
       ];
     };
   };
diff --git a/nixos/viridian/services/default.nix b/nixos/viridian/services/default.nix
index 1135b94..085e7f7 100644
--- a/nixos/viridian/services/default.nix
+++ b/nixos/viridian/services/default.nix
@@ -3,6 +3,7 @@
     ./borgbackup
     ./crowdsec
     ./forgejo
+    ./inspircd
     ./jupyterhub
     ./lighttpd
     ./minecraft
diff --git a/nixos/viridian/services/inspircd/default.nix b/nixos/viridian/services/inspircd/default.nix
new file mode 100644
index 0000000..4fdaaa4
--- /dev/null
+++ b/nixos/viridian/services/inspircd/default.nix
@@ -0,0 +1,10 @@
+{...}: {
+  services.inspircd = {
+    enable = true;
+    config = builtins.readFile ./inspircd.conf;
+  };
+
+  environment.etc = {
+    "inspircd/inspircd.motd".source = ./inspircd.motd;
+  };
+}
diff --git a/nixos/viridian/services/inspircd/inspircd.conf b/nixos/viridian/services/inspircd/inspircd.conf
new file mode 100644
index 0000000..fa9fc8c
--- /dev/null
+++ b/nixos/viridian/services/inspircd/inspircd.conf
@@ -0,0 +1,643 @@
+#-#-#-#-#-#-#-#-#-#-#-#-  SERVER DESCRIPTION  -#-#-#-#-#-#-#-#-#-#-#-#-
+#                                                                     #
+#   Here is where you enter the information about your server.        #
+#                                                                     #
+
+<server
+        # name: Hostname of your server. Does not need to resolve, but
+        # does need to be correct syntax (something.somethingelse.tld).
+        name="irc.home.arpa"
+
+        # description: Server description. Spaces are allowed.
+        description="Private Network!"
+
+        # id: The SID to use for this server. This should not be uncommented
+        # unless there is a SID conflict. This must be three characters long.
+        # The first character must be a digit [0-9], the remaining two chars
+        # may be letters [A-Z] or digits.
+        #id="97K"
+
+        # network: Network name given on connect to clients.
+        # Should be the same on all servers on the network.
+        network="Kanto">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-   ADMIN INFORMATION   -#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+#   Describes the Server Administrator's real name (optionally),      #
+#   nick, and email address.                                          #
+#                                                                     #
+
+<admin
+       # name: Real Name
+       name="Jasmine Marie Wilson"
+
+       # nick: Nickname (preferably what you use on the network)
+       nick="sajenim"
+
+       # email: email address. Does not have to be valid
+       # but should be for the users to be able to contact you.
+       email="its.jassy@pm.me">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-   PORT CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-
+#                                                                     #
+#   Configure the port and address bindings here.                     #
+#                                                                     #
+
+<bind
+      # address: IP address to bind to if the box that you are hosting
+      # on has more than one IP, else the ircd will try to bind to all
+      # IP's on the box if this is not defined.
+      address=""
+
+      # port: Port for users or servers to be able to connect to.
+      # you can select multiple ports by separating them
+      # with a - character like the example below.
+      port="6667"
+
+      # type: Type of bind block this is. It can either be clients or
+      # servers. Whichever you select will be the only type able to connect
+      # to this bind section.
+      type="clients"
+
+      # free: When this is enabled the listener will be created regardless of
+      # whether the interface that provides the bind address is available. This
+      # is useful for if you are starting InspIRCd on boot when the server may
+      # not have brought the network interfaces up yet.
+      free="no">
+
+
+#-#-#-#-#-#-#-#-#-#-  CONNECTIONS CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+#   This is where you can configure which connections are allowed     #
+#   and denied access onto your server. The password is optional.     #
+#   You may have as many of these as you require. To allow/deny all   #
+#   connections, use a '*' or 0.0.0.0/0.                              #
+#                                                                     #
+#  -- It is important to note that connect tags are read from the  -- #
+#     TOP DOWN. This means that you should have more specific deny    #
+#    and allow tags at the top, progressively more general, followed  #
+#        by a <connect allow="*"> (should you wish to have one).      #
+#                                                                     #
+# Connect blocks are searched twice for each user - once when the TCP #
+# connection is accepted, and once when the user completes their      #
+# registration. Most of the information (hostname, ident response,    #
+# password, TLS (SSL) when using STARTTLS, etc) is only available     #
+# during the second search. If you are trying to make a closed server #
+# you will probably need a connect block just for user registration.  #
+# This can be done by using <connect registered="no">                 #
+
+<connect
+         # name: Name to use for this connect block. Mainly used for
+         # connect class inheriting.
+         name="main"
+
+         # allow: The IP address or hostname of clients that can use this
+         # class. You can specify either an exact match, a glob match, or
+         # a CIDR range here.
+         allow="*"
+
+         # maxchans: Maximum number of channels a user in this class
+         # can be in at one time.
+         maxchans="20"
+
+         # timeout: How long the server will wait before disconnecting
+         # a user if they do not do anything on connect.
+         # (Note, this is a client-side thing, if the client does not
+         # send /NICK, /USER or /PASS)
+         timeout="20"
+
+         # pingfreq: How often the server tries to ping connecting clients.
+         pingfreq="2m"
+
+         # hardsendq: maximum amount of data allowed in a client's send queue
+         # before they are dropped. Keep this value higher than the length of
+         # your network's /LIST or /WHO output, or you will have lots of
+         # disconnects from sendq overruns!
+         # Setting this to "1M" is equivalent to "1048576", "8K" is 8192, etc.
+         hardsendq="1M"
+
+         # softsendq: amount of data in a client's send queue before the server
+         # begins delaying their commands in order to allow the sendq to drain
+         softsendq="10240"
+
+         # recvq: amount of data allowed in a client's queue before they are dropped.
+         # Entering "10K" is equivalent to "10240", see above.
+         recvq="10K"
+
+         # threshold: This specifies the amount of command penalty a user is allowed to have
+         # before being quit or fakelagged due to flood. Normal commands have a penalty of 1,
+         # ones such as /OPER have penalties up to 10.
+         #
+         # If you are not using fakelag, this should be at least 20 to avoid excess flood kills
+         # from processing some commands.
+         threshold="10"
+
+         # commandrate: This specifies the maximum rate that commands can be processed.
+         # If commands are sent more rapidly, the user's penalty will increase and they will
+         # either be fakelagged or killed when they reach the threshold
+         #
+         # Units are millicommands per second, so 1000 means one line per second.
+         commandrate="1000"
+
+         # fakelag: Use fakelag instead of killing users for excessive flood
+         #
+         # Fake lag stops command processing for a user when a flood is detected rather than
+         # immediately killing them; their commands are held in the recvq and processed later
+         # as the user's command penalty drops. Note that if this is enabled, flooders will
+         # quit with "RecvQ exceeded" rather than "Excess Flood".
+         fakelag="yes"
+
+         # localmax: Maximum local connections per IP.
+         localmax="3"
+
+         # globalmax: Maximum global (network-wide) connections per IP.
+         globalmax="3"
+
+         # resolvehostnames: If disabled, no DNS lookups will be performed on connecting users
+         # in this class. This can save a lot of resources on very busy servers.
+         resolvehostnames="yes"
+
+         # useident: Whether to try to look up the real username of users in this class using
+         # the RFC 1413 identification protocol.
+         # This setting only has effect when the ident module is loaded.
+         useident="no"
+
+         # usests: Whether a STS policy should be advertised to users in this class.
+         # This setting only has effect when the ircv3_sts module is loaded.
+         #usests="no"
+
+         # limit: How many users are allowed in this class
+         limit="5000"
+
+         # modes: The modes to set on users in this class when they connect to
+         # the server. See https://docs.inspircd.org/3/user-modes/ for a list of
+         # user modes. The example below sets user modes c (deaf_commonchans)
+         # and x (cloak) which require the commonchans and cloak modules.
+         # This setting only has effect when the conn_umodes module is loaded.
+         modes="+cx">
+
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-  CIDR CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-
+#                                                                     #
+# CIDR configuration allows detection of clones and applying of       #
+# throttle limits across a CIDR range. (A CIDR range is a group of    #
+# IPs, for example, the CIDR range 192.168.1.0-192.168.1.255 may be   #
+# represented as 192.168.1.0/24). This means that abuse across an ISP #
+# is detected and curtailed much easier. Here is a good chart that    #
+# shows how many IPs the different CIDRs correspond to:               #
+# https://en.wikipedia.org/wiki/IPv4_subnetting_reference             #
+# https://en.wikipedia.org/wiki/IPv6_subnetting_reference             #
+#                                                                     #
+
+<cidr
+      # ipv4clone: specifies how many bits of an IP address should be
+      # looked at for clones. The default only looks for clones on a
+      # single IP address of a user. You do not want to set this
+      # extremely low. (Values are 0-32).
+      ipv4clone="32"
+
+      # ipv6clone: specifies how many bits of an IP address should be
+      # looked at for clones. The default only looks for clones on a
+      # single IP address of a user. You do not want to set this
+      # extremely low. (Values are 0-128).
+      ipv6clone="128">
+
+
+#-#-#-#-#-#-#-#-#-#-  MISCELLANEOUS CONFIGURATION  -#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+
+# Files block - contains files whose contents are used by the ircd
+#
+#   motd - displayed on connect and when a user executes /MOTD
+# Modules can also define their own files
+<files motd="/etc//inspircd/inspircd.motd">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# If these values are not defined, InspIRCd uses the default DNS resolver
+# of your system.
+
+<dns
+     # timeout: time to wait to try to resolve DNS/hostname.
+     timeout="5">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#- LIST MODE LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# The <maxlist> tag is used customise the maximum number of each list #
+# mode that can be set on a channel.                                  #
+# The tags are read from top to bottom and the list mode limit from   #
+# the first tag found which matches the channel name and mode type is #
+# applied to that channel.                                            #
+# It is advisable to put an entry with the channel as '*' at the      #
+# bottom of the list. If none are specified or no maxlist tag is      #
+# matched, the banlist size defaults to 100 entries.                  #
+#                                                                     #
+
+# Allows all channels and list modes not previously matched to have
+# up to 100 entries.
+<maxlist chan="*" limit="100">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-  SERVER OPTIONS   -#-#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+#   Settings to define which features are usable on your server.      #
+#                                                                     #
+
+<options
+         # prefixquit: What (if anything) users' quit messages
+         # should be prefixed with.
+         prefixquit="Quit: "
+
+         # suffixquit: What (if anything) users' quit messages
+         # should be suffixed with.
+         suffixquit=""
+
+         # prefixpart: What (if anything) users' part messages
+         # should be prefixed with.
+         prefixpart="&quot;"
+
+         # suffixpart: What (if anything) users' part message
+         # should be suffixed with.
+         suffixpart="&quot;"
+
+         # fixedquit: Set all users' quit messages to this value.
+         #fixedquit=""
+
+         # fixedpart: Set all users' part messages in all channels
+         # to this value.
+         #fixedpart=""
+
+         # syntaxhints: If enabled, if a user fails to send the correct parameters
+         # for a command, the ircd will give back some help text of what
+         # the correct parameters are.
+         syntaxhints="no"
+
+         # casemapping: This sets the case mapping method to be used by the
+         # server. This MUST be the same on all servers. Possible values are:
+         # "ascii" (recommended)
+         # "rfc1459" (default, required for linking to 2.0 servers)
+         casemapping="ascii"
+
+         # cyclehostsfromuser: If enabled, the source of the mode change for
+         # cyclehosts will be the user who cycled. This can look nicer, but
+         # triggers anti-takeover mechanisms of some obsolete bots.
+         cyclehostsfromuser="no"
+
+         # announcets: If set to yes, when the timestamp on a channel changes, all users
+         # in the channel will be sent a NOTICE about it.
+         announcets="yes"
+
+         # allowmismatch: Setting this option to yes will allow servers to link even
+         # if they don't have the same "optionally common" modules loaded. Setting this to
+         # yes may introduce some desyncs and unwanted behaviour.
+         allowmismatch="no"
+
+         # defaultbind: Sets the default for <bind> tags without an address. Choices are
+         # ipv4 or ipv6; if not specified, IPv6 will be used if your system has support,
+         # falling back to IPv4 otherwise.
+         defaultbind="auto"
+
+         # hostintopic: If enabled, channels will show the host of the topic setter
+         # in the topic. If set to no, it will only show the nick of the topic setter.
+         hostintopic="yes"
+
+         # pingwarning: If a server does not respond to a ping within this period,
+         # it will send a notice to opers with snomask +l informing that the server
+         # is about to ping timeout.
+         pingwarning="15"
+
+         # serverpingfreq: How often pings are sent between servers.
+         serverpingfreq="1m"
+
+         # splitwhois: Whether to split private/secret channels from normal channels
+         # in WHOIS responses. Possible values for this are:
+         # 'no' - list all channels together in the WHOIS response regardless of type.
+         # 'split' - split private/secret channels to a separate WHOIS response numeric.
+         # 'splitmsg' - the same as split but also send a message explaining the split.
+         splitwhois="no"
+
+         # defaultmodes: The modes to set on a channel when it is created. See
+         # https://docs.inspircd.org/3/channel-modes/ for a list of channel
+         # modes. If a prefix mode is included in this option it will be set on
+         # the user that created the channel. The example below sets channel
+         # modes n (noextmsg) and t (topiclock) and grants channel prefix mode
+         # o (op) to the channel creator.
+         defaultmodes="not"
+
+         # xlinemessage: This is the text that is sent to a user when they are
+         # banned from the server.
+         xlinemessage="You're banned! Email irc@example.com with the ERROR line below for help."
+
+         # allowzerolimit: If enabled then allow a limit of 0 to be set on channels.
+         # This is non-standard behaviour and should only be enabled if you need to
+         # link with servers running 2.0. Defaults to yes.
+         allowzerolimit="no"
+
+         # modesinlist: If enabled then the current channel modes will be shown
+         # in the /LIST response. Defaults to yes.
+         modesinlist="no"
+
+         # exemptchanops: Allows users with with a status mode to be exempt
+         # from various channel restrictions. Possible restrictions are:
+         #  - anticaps        Channel mode +B - blocks messages with too many capital
+         #                    letters (requires the anticaps module).
+         #  - auditorium-see  Permission required to see the full user list of
+         #                    a +u channel (requires the auditorium module).
+         #  - auditorium-vis  Permission required to be visible in a +u channel
+         #                    (requires the auditorium module).
+         #  - blockcaps       Channel mode +B - blocks messages with too many capital
+         #                    letters (requires the blockcaps module).
+         #  - blockcolor      Channel mode +c - blocks messages with formatting codes
+         #                    (requires the blockcolor module).
+         #  - censor          Channel mode +G - censors messages based on the network
+         #                    configuration (requires the censor module).
+         #  - delaymsg        Channel mode +d - blocks sending messages until specified
+         #                    seconds have passed since user join
+         #  - filter          Channel mode +g - blocks messages containing the given
+         #                    glob mask (requires the chanfilter module).
+         #  - flood           Channel mode +f - kicks (and bans) on text flood of a
+         #                    specified rate (requires the messageflood module).
+         #  - nickflood       Channel mode +F - blocks nick changes after a specified
+         #                    rate (requires the nickflood module).
+         #  - noctcp          Channel mode +C - blocks any CTCPs to the channel
+         #                    (requires the noctcp module).
+         #  - nonick          Channel mode +N - prevents users on the channel from
+         #                    changing nicks (requires the nonicks module).
+         #  - nonotice        Channel mode +T - blocks /NOTICEs to the channel
+         #                    (requires the nonotice module).
+         #  - regmoderated    Channel mode +M - blocks unregistered users from
+         #                    speaking (requires the services account module).
+         #  - stripcolor      Channel mode +S - strips formatting codes from
+         #                    messages (requires the stripcolor module).
+         #  - topiclock       Channel mode +t - limits changing the topic to (half)ops
+         # You can also configure this on a per-channel basis with a channel mode and
+         # even negate the configured exemptions below.
+         # See exemptchanops in modules.conf.example for more details.
+         exemptchanops="censor:o filter:o nickflood:o nonick:v regmoderated:o"
+
+         # invitebypassmodes: This allows /INVITE to bypass other channel modes.
+         # (Such as +k, +j, +l, etc.)
+         invitebypassmodes="yes"
+
+         # nosnoticestack: This prevents snotices from 'stacking' and giving you
+         # the message saying '(last message repeated X times)'. Defaults to no.
+         nosnoticestack="no">
+
+
+#-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+
+<performance
+             # netbuffersize: Size of the buffer used to receive data from clients.
+             # The ircd may only read this amount of text in 1 go at any time.
+             netbuffersize="10240"
+
+             # somaxconn: The maximum number of connections that may be waiting
+             # in the accept queue. This is *NOT* the total maximum number of
+             # connections per server. Some systems may only allow this to be up
+             # to 5, while others (such as Linux and *BSD) default to 128.
+             # Setting this above the limit imposed by your OS can have undesired
+             # effects.
+             somaxconn="128"
+
+             # softlimit: This optional feature allows a defined softlimit for
+             # connections. If defined, it sets a soft max connections value.
+             softlimit="12800"
+
+             # clonesonconnect: If this is set to no, we won't check for clones
+             # on initial connection, but only after the DNS check is done.
+             # This can be useful where your main class is more restrictive
+             # than some other class a user can be assigned after DNS lookup is complete.
+             # Turning this option off will make the server spend more time on users we may
+             # potentially not want. Normally this should be negligible, though.
+             # Default value is yes
+             clonesonconnect="yes"
+
+             # timeskipwarn: The time period that a server clock can jump by before
+             # operators will be warned that the server is having performance issues.
+             timeskipwarn="2s"
+
+             # quietbursts: When syncing or splitting from a network, a server
+             # can generate a lot of connect and quit messages to opers with
+             # +C and +Q snomasks. Setting this to yes squelches those messages,
+             # which makes it easier for opers, but degrades the functionality of
+             # bots like BOPM during netsplits.
+             quietbursts="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-# SECURITY CONFIGURATION  #-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+
+<security
+          # allowcoreunload: If this value is set to yes, Opers will be able to
+          # unload core modules (e.g. core_privmsg).
+          allowcoreunload="no"
+
+          # announceinvites: This option controls which members of the channel
+          # receive an announcement when someone is INVITEd. Available values:
+          # 'none' - don't send invite announcements
+          # 'all' - send invite announcements to all members
+          # 'ops' - send invite announcements to ops and higher ranked users
+          # 'dynamic' - send invite announcements to halfops (if available) and
+          #             higher ranked users. This is the recommended setting.
+          announceinvites="dynamic"
+
+          # hideulines: If this value is set to yes, U-lined servers will
+          # be hidden from non-opers in /LINKS and /MAP.
+          hideulines="no"
+
+          # flatlinks: If this value is set to yes, /MAP and /LINKS will
+          # be flattened when shown to non-opers.
+          flatlinks="no"
+
+          # hidebans: If this value is set to yes, when a user is banned ([KGZ]-lined)
+          # only opers will see the ban message when the user is removed
+          # from the server.
+          hidebans="no"
+
+          # hidekills: If defined, replaces who executed a /KILL with a custom string.
+          hidekills=""
+
+          # hideulinekills: Hide kills from clients of ulined servers from server notices.
+          hideulinekills="yes"
+
+          # hidesplits: If enabled, non-opers will not be able to see which
+          # servers split in a netsplit, they will only be able to see that one
+          # occurred (If their client has netsplit detection).
+          hidesplits="no"
+
+          # maxtargets: Maximum number of targets per command.
+          # (Commands like /NOTICE, /PRIVMSG, /KICK, etc)
+          maxtargets="20"
+
+          # customversion: A custom message to be displayed in the comments field
+          # of the VERSION command response. This does not hide the InspIRCd version.
+          customversion=""
+
+          # restrictbannedusers: If this is set to yes, InspIRCd will not allow users
+          # banned on a channel to change nickname or message channels they are
+          # banned on. This can also be set to silent to restrict the user but not
+          # notify them.
+          restrictbannedusers="yes"
+
+          # genericoper: Setting this value to yes makes all opers on this server
+          # appear as 'is a server operator' in their WHOIS, regardless of their
+          # oper type, however oper types are still used internally. This only
+          # affects the display in WHOIS.
+          genericoper="no"
+
+          # userstats: /STATS commands that users can run (opers can run all).
+          userstats="Pu">
+
+#-#-#-#-#-#-#-#-#-#-#-#-# LIMITS CONFIGURATION  #-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# This configuration tag defines the maximum sizes of various types   #
+# on IRC, such as the maximum length of a channel name, and the       #
+# maximum length of a channel. These values should match network-wide #
+# otherwise issues will occur.                                        #
+#                                                                     #
+# The highest safe value you can set any of these options to is 500,  #
+# but it is recommended that you keep them somewhat                   #
+# near their defaults (or lower).                                     #
+
+<limits
+        # maxaway: Maximum length of an away message.
+        maxaway="200"
+
+        # maxchan: Maximum length of a channel name.
+        maxchan="60"
+
+        # maxhost: Maximum length of a hostname.
+        maxhost="64"
+
+        # maxident: Maximum length of a ident/username.
+        maxident="10"
+
+        # maxkick: Maximum length of a kick message.
+        maxkick="300"
+
+        # maxmodes: Maximum number of mode changes per line.
+        maxmodes="20"
+
+        # maxnick: Maximum length of a nickname.
+        maxnick="30"
+
+        # maxquit: Maximum length of a quit message.
+        maxquit="300"
+
+        # maxreal: Maximum length of a real name.
+        maxreal="130"
+
+        # maxtopic: Maximum length of a channel topic.
+        maxtopic="330">
+
+#-#-#-#-#-#-#-#-#-#-#-#-# PATHS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# This configuration tag defines the location that InspIRCd stores    #
+# various types of files such as configuration files, log files and   #
+# modules. You will probably not need to change these from the values #
+# set when InspIRCd was built unless you are using a binary package   #
+# where you do not have the ability to set build time configuration.  #
+#<path configdir="conf" datadir="data" logdir="logs" moduledir="modules">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Logging
+# -------
+#
+# Logging is covered with the <log> tag, which you may use to change
+# the behaviour of the logging of the IRCd.
+#
+# An example log tag would be:
+#  <log method="file" type="OPER" level="default" target="opers.log">
+# which would log all information on /OPER (failed and successful) to
+# a file called opers.log.
+#
+# There are many different types which may be used, and modules may
+# generate their own. A list of useful types:
+#  - USERS - information relating to user connection and disconnection
+#  - OPER - successful and failed oper attempts
+#  - KILL - kill related messages
+#  - FILTER - messages related to filter matches (filter module)
+#  - CONFIG - configuration related messages
+#  - COMMAND - die and restart messages, and messages related to unknown user types
+#  - SOCKET - socket engine informational/error messages
+#  - MODULE - module related messages
+#  - STARTUP - messages related to starting up the server
+#
+# You may also log *everything* by using a type of *, and subtract things out
+# of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT".
+#
+# Useful levels are:
+#  - default (general messages, including errors)
+#  - sparse (misc error messages)
+#  - debug (debug messages)
+#
+# Some types only produce output in the debug level, those are:
+#  - BANCACHE - ban cache debug messages
+#  - CHANNELS - information relating to joining/creating channels
+#  - CULLLIST - debug messages related to issues with removing users
+#  - RESOLVER - DNS related debug messages
+#  - CONNECTCLASS - Connection class debug messages
+#  - USERINPUT
+#  - USEROUTPUT
+#
+# If your server is producing a high levels of log messages you can also set the
+# flush="[positive number]" attribute to specify how many log messages should be
+# buffered before flushing to disk. You should probably not specify this unless
+# you are having problems.
+#
+# The following log tag is highly default and uncustomised. It is recommended you
+# sort out your own log tags. This is just here so you get some output.
+
+<log method="file" type="* -USERINPUT -USEROUTPUT" level="default" target="ircd.log">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-  WHOWAS OPTIONS   -#-#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# This tag lets you define the behaviour of the /WHOWAS command of    #
+# your server.                                                        #
+#                                                                     #
+
+<whowas
+        # groupsize: Maximum entries per nick shown when performing
+        # a /WHOWAS <nick>.
+        groupsize="10"
+
+        # maxgroups: Maximum number of nickgroups that can be added to
+        # the list so that /WHOWAS does not use a lot of resources on
+        # large networks.
+        maxgroups="100000"
+
+        # maxkeep: Maximum time a nick is kept in the whowas list
+        # before being pruned. Time may be specified in seconds,
+        # or in the following format: 1y2w3d4h5m6s. Minimum is
+        # 1 hour.
+        maxkeep="3d">
+
+#-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS  -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# This optional tag allows you to specify how wide a G-line, E-line,  #
+# K-line, Z-line or Q-line can be before it is forbidden from being   #
+# set. By setting hostmasks="yes", you can allow all G-, K-, E-lines, #
+# no matter how many users the ban would cover. This is not           #
+# recommended! By setting ipmasks="yes", you can allow all Z-lines,   #
+# no matter how many users these cover too. Needless to say we        #
+# don't recommend you do this, or, set nickmasks="yes", which will    #
+# allow any Q-line.                                                   #
+#                                                                     #
+
+<insane
+        # hostmasks: Allow bans with insane hostmasks. (over-reaching bans)
+        hostmasks="no"
+
+        # ipmasks: Allow bans with insane ipmasks. (over-reaching bans)
+        ipmasks="no"
+
+        # nickmasks: Allow bans with insane nickmasks. (over-reaching bans)
+        nickmasks="no"
+
+        # trigger: What percentage of users on the network to trigger
+        # specifying an insane ban as. The default is 95.5%, which means
+        # if you have a 1000 user network, a ban will not be allowed if it
+        # will be banning 955 or more users.
+        trigger="95.5">
+
diff --git a/nixos/viridian/services/inspircd/inspircd.motd b/nixos/viridian/services/inspircd/inspircd.motd
new file mode 100644
index 0000000..cbeb536
--- /dev/null
+++ b/nixos/viridian/services/inspircd/inspircd.motd
@@ -0,0 +1,37 @@
+_____                        _____   _____    _____      _
+|_   _|                      |_   _| |  __ \  / ____|    | |
+  | |    _ __    ___   _ __    | |   | |__) || |       __| |
+  | |   | '_ \  / __| | '_ \   | |   |  _  / | |      / _` |
+ _| |_  | | | | \__ \ | |_) | _| |_  | | \ \ | |____ | (_| |
+|_____| |_| |_| |___/ | .__/ |_____| |_|  \_\ \_____| \__,_|
+ _____________________| |__________________________________
+|_____________________|_|__________________________________|
+
+                         \iPowering IRC communities since 2006\x
+
+       /\     /\
+      {  `---'  }  \bWELCOME TO AN \c13I\c04N\c07S\c08P\c03I\c10R\c12C\c06D\c99 NETWORK\x
+      {  O   O  }
+      ~~>  V  <~~    If you see this, I'm probably new.
+       \  \|/  /       If I'm not new, my owner is lazy. ;-)
+        `-----'____
+        /     \    \_
+       {       }\  )_\_   _
+       |  \_/  |/ /  \_\_/ )
+        \__/  /(_/     \__/
+          (__/
+
+      +---- To change this see \bmotd.txt.example\x ----+
+      |                                             |
+      |   * \bWeb:\x https://www.inspircd.org           |
+      |   * \bIRC:\x ircs://irc.teranova.net/inspircd   |
+      |   * \bDocs:\x https://docs.inspircd.org         |
+      |   * \bIssues:\x https://git.io/JIuYi            |
+      |   * \bDiscussions:\x https://git.io/JIuYv       |
+      |                                             |
+      | We hope you like this software.  Please do  |
+      | make sure to customise your configuration,  |
+      | though, so you love it.  Enjoy.             |
+      |                                             |
+      |                        -- The InspIRCd Team |
+      +---------------------------------------------+