dactyl-manuform/README.md
2018-05-11 10:10:45 +09:00

2.1 KiB

Dactyl ManuForm Mini Keyboard

This is a fork of the Dactyl-ManuForm. The Dactyl-Manuform is a fork of the Dactyl with the thumb cluster from ManuForm.

Features

  • Sidenub is disabled by default so that Kailh, Outemu and other switches can be used. If you use Cherry MX or Gateron switches, you can enable the sidenubs.
  • One key in the thumb cluster has been removed. Other thumb keys are also adjusted.
  • The total height is reduced and wire posts are removed. This results in a higher printing speed and a lower cost.
  • A TRRS mount instead of a RJ9 mount is used.
  • A micro USB mount is used. A breakout board, or an extension cable can be used.
  • Screw posts are moved inside.
  • The pro micro holder has been modified. Dupont cables can be used.

Future plans (PR is welcome)

  • Move screw posts 3mm upwards so that the bottom plate can be inserted into the case.
  • Add smoothing.

Getting the case and bottom plate

Option 1: Generate OpenSCAD and STL models

  • Run lein generate or lein auto generate
  • This will regenerate the things/*.scad files
  • Use OpenSCAD to open a .scad file.
  • Make changes to design, repeat load-file, OpenSCAD will watch for changes and rerender.
  • When done, use OpenSCAD to export STL files

Option 2: Download from Releases

Generated models (only 4x5) can be downloaded from Releases.

Option 3: Download from Thingiverse

Dactyl ManuForm Mini on Thingiverse

Option 4: Order from Shapeways

Order from Shapeways

License

Copyright © 2015-2018 Matthew Adereth, Tom Short and Leo Lou

The source code for generating the models is distributed under the GNU AFFERO GENERAL PUBLIC LICENSE Version 3.

The generated models are distributed under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).