1.4 KiB
Dactyl Flexible PCB Rough Guide
For now, take a look at the images and try to figure things out, I know
that's not great (it's better than nothing!)
Making the PCB
Get two sheets of 6in square Pyralux™. Use the Toner Transfer method to etch the Pyralux sheets as you would a usual PCB
NOTE: If you only have an Inkjet make photocopies of the print out, voilà Toner based copies!
Here'sa handy toner transfer guide …
Print these PCB designs out…
Left hand:
Right hand:
When you're done etching, you'll need to carefully cut the pcb into pieces… See the images below.
This is Madness…
The thumb cluster pcb for the left hand:
Solder the MCP like so:
Solder the Teensy 2.0 like so:
Some interesting pull up 10k resistor business here… (TODO add a small diagram and notes)
Each hand of the keyboard will wire up like so:
Teensy goes here… note the rows soldered to the teensy via the
Pyralux:
Here the left hand:
That's all for now, this guide will improve over time! (TODO!)