jasmine/OrcaSlicer-Profiles
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

update profiles

Browse source
This commit is contained in:
♥ Minnie ♥ 2024-11-23 22:35:45 +08:00
parent 6fb27b898c
commit fa88ff248e
Signed by: jasmine
GPG key ID: 8563E358D4E8040E
10 changed files with 148 additions and 100 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
filament/eSUN PETG.info Normal file
View file

@ -0,0 +1,5 @@
sync_info = update
user_id =
setting_id =
base_id = GFSA04
updated_time = 1732229621

55
filament/eSUN PETG.json Normal file
View file

@ -0,0 +1,55 @@
{
"cool_plate_temp": [
"0"
],
"cool_plate_temp_initial_layer": [
"0"
],
"enable_pressure_advance": [
"1"
],
"filament_flow_ratio": [
"0.94"
],
"filament_max_volumetric_speed": [
"12"
],
"filament_settings_id": [
"eSUN PETG"
],
"filament_vendor": [
"eSUN"
],
"from": "User",
"hot_plate_temp": [
"0"
],
"hot_plate_temp_initial_layer": [
"0"
],
"inherits": "My Generic PETG",
"is_custom_defined": "0",
"name": "eSUN PETG",
"nozzle_temperature": [
"245"
],
"nozzle_temperature_initial_layer": [
"245"
],
"nozzle_temperature_range_high": [
"250"
],
"nozzle_temperature_range_low": [
"230"
],
"pressure_advance": [
"0.062"
],
"textured_cool_plate_temp": [
"0"
],
"textured_cool_plate_temp_initial_layer": [
"0"
],
"version": "2.2.0.4"
}

12
filament/eSUN PLA+.json
View file

@ -17,8 +17,11 @@
"filament_cost": [
"25.95"
],
"filament_flow_ratio": [
"0.975"
],
"filament_max_volumetric_speed": [
"13"
"20"
],
"filament_settings_id": [
"eSUN PLA+"
@ -33,9 +36,6 @@
"inherits": "My Generic PLA",
"is_custom_defined": "0",
"name": "eSUN PLA+",
"nozzle_temperature_initial_layer": [
"225"
],
"nozzle_temperature_range_low": [
"210"
],
@ -43,10 +43,10 @@
"0.038"
],
"textured_plate_temp": [
"70"
"65"
],
"textured_plate_temp_initial_layer": [
"70"
"65"
],
"version": "2.1.1.0"
}

8
machine/Croesus 0.4 nozzle.json
View file

@ -8,11 +8,11 @@
"is_custom_defined": "0",
"machine_end_gcode": "print_end",
"machine_max_acceleration_x": [
"5000",
"10000",
"20000"
],
"machine_max_acceleration_y": [
"5000",
"10000",
"20000"
],
"machine_max_acceleration_z": [
@ -28,11 +28,11 @@
"9"
],
"machine_max_speed_x": [
"180",
"450",
"200"
],
"machine_max_speed_y": [
"180",
"450",
"200"
],
"machine_start_gcode": "M104 S0 ; Stops OrcaSlicer from sending temp waits separately\nM140 S0\nprint_start EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature]",

27
process/0.08mm Extra Fine @Croesus.json
View file

@ -1,21 +1,20 @@
{
"bridge_acceleration": "500",
"brim_type": "no_brim",
"default_acceleration": "2000",
"default_acceleration": "4000",
"filename_format": "{input_filename_base}.gcode",
"from": "User",
"fuzzy_skin_point_distance": "0.1",
"fuzzy_skin_thickness": "0.1",
"fuzzy_skin_point_distance": "0.08",
"fuzzy_skin_thickness": "0.08",
"gap_infill_speed": "30",
"inherits": "0.08mm Extra Fine @MyKlipper",
"initial_layer_acceleration": "1000",
"initial_layer_acceleration": "2000",
"initial_layer_infill_speed": "60",
"initial_layer_print_height": "0.24",
"initial_layer_speed": "30",
"inner_wall_acceleration": "1000",
"inner_wall_speed": "80",
"internal_solid_infill_acceleration": "2500",
"internal_solid_infill_speed": "120",
"inner_wall_acceleration": "2000",
"inner_wall_speed": "150",
"internal_solid_infill_acceleration": "5000",
"ironing_flow": "35%",
"ironing_spacing": "0.2",
"ironing_speed": "180",
@ -23,7 +22,7 @@
"name": "0.08mm Extra Fine @Croesus",
"only_one_wall_first_layer": "1",
"only_one_wall_top": "1",
"outer_wall_acceleration": "500",
"outer_wall_acceleration": "1000",
"outer_wall_speed": "80",
"precise_outer_wall": "1",
"print_settings_id": "0.08mm Extra Fine @Croesus",
@ -31,16 +30,16 @@
"skirt_loops": "1",
"skirt_speed": "0",
"small_perimeter_speed": "30",
"sparse_infill_acceleration": "5000",
"sparse_infill_acceleration": "7000",
"sparse_infill_density": "40%",
"sparse_infill_line_width": "160%",
"sparse_infill_pattern": "gyroid",
"sparse_infill_speed": "180",
"sparse_infill_speed": "300",
"support_speed": "120",
"top_surface_acceleration": "1000",
"top_surface_acceleration": "2000",
"top_surface_line_width": "100%",
"top_surface_speed": "60",
"travel_acceleration": "5000",
"travel_speed": "180",
"travel_acceleration": "10000",
"travel_speed": "450",
"version": "2.1.1.0"
}

29
process/0.12mm Fine @Croesus.json
View file

@ -1,21 +1,20 @@
{
"bridge_acceleration": "500",
"brim_type": "no_brim",
"default_acceleration": "2000",
"default_acceleration": "4000",
"filename_format": "{input_filename_base}.gcode",
"from": "User",
"fuzzy_skin_point_distance": "0.1",
"fuzzy_skin_thickness": "0.1",
"fuzzy_skin_point_distance": "0.12",
"fuzzy_skin_thickness": "0.12",
"gap_infill_speed": "30",
"inherits": "0.12mm Fine @MyKlipper",
"initial_layer_acceleration": "1000",
"initial_layer_acceleration": "2000",
"initial_layer_infill_speed": "60",
"initial_layer_print_height": "0.24",
"initial_layer_speed": "30",
"inner_wall_acceleration": "1000",
"inner_wall_speed": "80",
"internal_solid_infill_acceleration": "2500",
"internal_solid_infill_speed": "120",
"inner_wall_acceleration": "2000",
"inner_wall_speed": "150",
"internal_solid_infill_acceleration": "5000",
"ironing_flow": "35%",
"ironing_spacing": "0.2",
"ironing_speed": "180",
@ -23,7 +22,7 @@
"name": "0.12mm Fine @Croesus",
"only_one_wall_first_layer": "1",
"only_one_wall_top": "1",
"outer_wall_acceleration": "500",
"outer_wall_acceleration": "1000",
"outer_wall_speed": "80",
"precise_outer_wall": "1",
"print_settings_id": "0.12mm Fine @Croesus",
@ -31,18 +30,16 @@
"skirt_loops": "1",
"skirt_speed": "0",
"small_perimeter_speed": "30",
"sparse_infill_acceleration": "5000",
"sparse_infill_acceleration": "7000",
"sparse_infill_density": "40%",
"sparse_infill_line_width": "160%",
"sparse_infill_pattern": "gyroid",
"sparse_infill_speed": "180",
"support_bottom_z_distance": "0.12",
"sparse_infill_speed": "300",
"support_speed": "120",
"support_top_z_distance": "0.12",
"top_surface_acceleration": "1000",
"top_surface_acceleration": "2000",
"top_surface_line_width": "100%",
"top_surface_speed": "60",
"travel_acceleration": "5000",
"travel_speed": "180",
"travel_acceleration": "10000",
"travel_speed": "450",
"version": "2.1.1.0"
}

27
process/0.16mm Optimal @Croesus.json
View file

@ -1,21 +1,20 @@
{
"bridge_acceleration": "500",
"brim_type": "no_brim",
"default_acceleration": "2000",
"default_acceleration": "4000",
"filename_format": "{input_filename_base}.gcode",
"from": "User",
"fuzzy_skin_point_distance": "0.1",
"fuzzy_skin_thickness": "0.1",
"fuzzy_skin_point_distance": "0.16",
"fuzzy_skin_thickness": "0.16",
"gap_infill_speed": "30",
"inherits": "0.16mm Optimal @MyKlipper",
"initial_layer_acceleration": "1000",
"initial_layer_acceleration": "2000",
"initial_layer_infill_speed": "60",
"initial_layer_print_height": "0.24",
"initial_layer_speed": "30",
"inner_wall_acceleration": "1000",
"inner_wall_speed": "80",
"internal_solid_infill_acceleration": "2500",
"internal_solid_infill_speed": "120",
"inner_wall_acceleration": "2000",
"inner_wall_speed": "150",
"internal_solid_infill_acceleration": "5000",
"ironing_flow": "35%",
"ironing_spacing": "0.2",
"ironing_speed": "180",
@ -23,7 +22,7 @@
"name": "0.16mm Optimal @Croesus",
"only_one_wall_first_layer": "1",
"only_one_wall_top": "1",
"outer_wall_acceleration": "500",
"outer_wall_acceleration": "1000",
"outer_wall_speed": "80",
"precise_outer_wall": "1",
"print_settings_id": "0.16mm Optimal @Croesus",
@ -31,16 +30,16 @@
"skirt_loops": "1",
"skirt_speed": "0",
"small_perimeter_speed": "30",
"sparse_infill_acceleration": "5000",
"sparse_infill_acceleration": "7000",
"sparse_infill_density": "40%",
"sparse_infill_line_width": "160%",
"sparse_infill_pattern": "gyroid",
"sparse_infill_speed": "180",
"sparse_infill_speed": "300",
"support_speed": "120",
"top_surface_acceleration": "1000",
"top_surface_acceleration": "2000",
"top_surface_line_width": "100%",
"top_surface_speed": "60",
"travel_acceleration": "5000",
"travel_speed": "180",
"travel_acceleration": "10000",
"travel_speed": "450",
"version": "2.1.1.0"
}

27
process/0.20mm Standard @Croesus.json
View file

@ -1,21 +1,20 @@
{
"bridge_acceleration": "500",
"brim_type": "no_brim",
"default_acceleration": "2000",
"default_acceleration": "4000",
"filename_format": "{input_filename_base}.gcode",
"from": "User",
"fuzzy_skin_point_distance": "0.1",
"fuzzy_skin_thickness": "0.1",
"fuzzy_skin_point_distance": "0.2",
"fuzzy_skin_thickness": "0.2",
"gap_infill_speed": "30",
"inherits": "0.20mm Standard @MyKlipper",
"initial_layer_acceleration": "1000",
"initial_layer_acceleration": "2000",
"initial_layer_infill_speed": "60",
"initial_layer_print_height": "0.24",
"initial_layer_speed": "30",
"inner_wall_acceleration": "1000",
"inner_wall_speed": "80",
"internal_solid_infill_acceleration": "2500",
"internal_solid_infill_speed": "120",
"inner_wall_acceleration": "2000",
"inner_wall_speed": "150",
"internal_solid_infill_acceleration": "5000",
"ironing_flow": "35%",
"ironing_spacing": "0.2",
"ironing_speed": "180",
@ -23,7 +22,7 @@
"name": "0.20mm Standard @Croesus",
"only_one_wall_first_layer": "1",
"only_one_wall_top": "1",
"outer_wall_acceleration": "500",
"outer_wall_acceleration": "1000",
"outer_wall_speed": "80",
"precise_outer_wall": "1",
"print_settings_id": "0.20mm Standard @Croesus",
@ -31,16 +30,16 @@
"skirt_loops": "1",
"skirt_speed": "0",
"small_perimeter_speed": "30",
"sparse_infill_acceleration": "5000",
"sparse_infill_acceleration": "7000",
"sparse_infill_density": "40%",
"sparse_infill_line_width": "160%",
"sparse_infill_pattern": "gyroid",
"sparse_infill_speed": "180",
"sparse_infill_speed": "300",
"support_speed": "120",
"top_surface_acceleration": "1000",
"top_surface_acceleration": "2000",
"top_surface_line_width": "100%",
"top_surface_speed": "60",
"travel_acceleration": "5000",
"travel_speed": "180",
"travel_acceleration": "10000",
"travel_speed": "450",
"version": "2.1.1.0"
}

29
process/0.24mm Draft @Croesus.json
View file

@ -1,21 +1,20 @@
{
"bridge_acceleration": "500",
"brim_type": "no_brim",
"default_acceleration": "2000",
"default_acceleration": "4000",
"filename_format": "{input_filename_base}.gcode",
"from": "User",
"fuzzy_skin_point_distance": "0.1",
"fuzzy_skin_thickness": "0.1",
"fuzzy_skin_point_distance": "0.24",
"fuzzy_skin_thickness": "0.24",
"gap_infill_speed": "30",
"inherits": "0.24mm Draft @MyKlipper",
"initial_layer_acceleration": "1000",
"initial_layer_acceleration": "2000",
"initial_layer_infill_speed": "60",
"initial_layer_print_height": "0.24",
"initial_layer_speed": "30",
"inner_wall_acceleration": "1000",
"inner_wall_speed": "80",
"internal_solid_infill_acceleration": "2500",
"internal_solid_infill_speed": "120",
"inner_wall_acceleration": "2000",
"inner_wall_speed": "150",
"internal_solid_infill_acceleration": "5000",
"ironing_flow": "35%",
"ironing_spacing": "0.2",
"ironing_speed": "180",
@ -23,7 +22,7 @@
"name": "0.24mm Draft @Croesus",
"only_one_wall_first_layer": "1",
"only_one_wall_top": "1",
"outer_wall_acceleration": "500",
"outer_wall_acceleration": "1000",
"outer_wall_speed": "80",
"precise_outer_wall": "1",
"print_settings_id": "0.24mm Draft @Croesus",
@ -31,18 +30,16 @@
"skirt_loops": "1",
"skirt_speed": "0",
"small_perimeter_speed": "30",
"sparse_infill_acceleration": "5000",
"sparse_infill_acceleration": "7000",
"sparse_infill_density": "40%",
"sparse_infill_line_width": "160%",
"sparse_infill_pattern": "gyroid",
"sparse_infill_speed": "180",
"support_bottom_z_distance": "0.24",
"sparse_infill_speed": "300",
"support_speed": "120",
"support_top_z_distance": "0.24",
"top_surface_acceleration": "1000",
"top_surface_acceleration": "2000",
"top_surface_line_width": "100%",
"top_surface_speed": "60",
"travel_acceleration": "5000",
"travel_speed": "180",
"travel_acceleration": "10000",
"travel_speed": "450",
"version": "2.1.1.0"
}

29
process/0.28mm Extra Draft @Croesus.json
View file

@ -1,21 +1,20 @@
{
"bridge_acceleration": "500",
"brim_type": "no_brim",
"default_acceleration": "2000",
"default_acceleration": "4000",
"filename_format": "{input_filename_base}.gcode",
"from": "User",
"fuzzy_skin_point_distance": "0.1",
"fuzzy_skin_thickness": "0.1",
"fuzzy_skin_point_distance": "0.28",
"fuzzy_skin_thickness": "0.28",
"gap_infill_speed": "30",
"inherits": "0.28mm Extra Draft @MyKlipper",
"initial_layer_acceleration": "1000",
"initial_layer_acceleration": "2000",
"initial_layer_infill_speed": "60",
"initial_layer_print_height": "0.24",
"initial_layer_speed": "30",
"inner_wall_acceleration": "1000",
"inner_wall_speed": "80",
"internal_solid_infill_acceleration": "2500",
"internal_solid_infill_speed": "120",
"inner_wall_acceleration": "2000",
"inner_wall_speed": "150",
"internal_solid_infill_acceleration": "5000",
"ironing_flow": "35%",
"ironing_spacing": "0.2",
"ironing_speed": "180",
@ -23,7 +22,7 @@
"name": "0.28mm Extra Draft @Croesus",
"only_one_wall_first_layer": "1",
"only_one_wall_top": "1",
"outer_wall_acceleration": "500",
"outer_wall_acceleration": "1000",
"outer_wall_speed": "80",
"precise_outer_wall": "1",
"print_settings_id": "0.28mm Extra Draft @Croesus",
@ -31,18 +30,16 @@
"skirt_loops": "1",
"skirt_speed": "0",
"small_perimeter_speed": "30",
"sparse_infill_acceleration": "5000",
"sparse_infill_acceleration": "7000",
"sparse_infill_density": "40%",
"sparse_infill_line_width": "160%",
"sparse_infill_pattern": "gyroid",
"sparse_infill_speed": "180",
"support_bottom_z_distance": "0.28",
"sparse_infill_speed": "300",
"support_speed": "120",
"support_top_z_distance": "0.28",
"top_surface_acceleration": "1000",
"top_surface_acceleration": "2000",
"top_surface_line_width": "100%",
"top_surface_speed": "60",
"travel_acceleration": "5000",
"travel_speed": "180",
"travel_acceleration": "10000",
"travel_speed": "450",
"version": "2.1.1.0"
}