diff --git a/filament/eSUN PETG.info b/filament/eSUN PETG.info new file mode 100644 index 0000000..7e78923 --- /dev/null +++ b/filament/eSUN PETG.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GFSA04 +updated_time = 1732229621 diff --git a/filament/eSUN PETG.json b/filament/eSUN PETG.json new file mode 100644 index 0000000..4b7bec6 --- /dev/null +++ b/filament/eSUN PETG.json @@ -0,0 +1,55 @@ +{ + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "eSUN PETG" + ], + "filament_vendor": [ + "eSUN" + ], + "from": "User", + "hot_plate_temp": [ + "0" + ], + "hot_plate_temp_initial_layer": [ + "0" + ], + "inherits": "My Generic PETG", + "is_custom_defined": "0", + "name": "eSUN PETG", + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "pressure_advance": [ + "0.062" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "version": "2.2.0.4" +} diff --git a/filament/eSUN PLA+.json b/filament/eSUN PLA+.json index 85385ca..83db4b0 100644 --- a/filament/eSUN PLA+.json +++ b/filament/eSUN PLA+.json @@ -17,8 +17,11 @@ "filament_cost": [ "25.95" ], + "filament_flow_ratio": [ + "0.975" + ], "filament_max_volumetric_speed": [ - "13" + "20" ], "filament_settings_id": [ "eSUN PLA+" @@ -33,9 +36,6 @@ "inherits": "My Generic PLA", "is_custom_defined": "0", "name": "eSUN PLA+", - "nozzle_temperature_initial_layer": [ - "225" - ], "nozzle_temperature_range_low": [ "210" ], @@ -43,10 +43,10 @@ "0.038" ], "textured_plate_temp": [ - "70" + "65" ], "textured_plate_temp_initial_layer": [ - "70" + "65" ], "version": "2.1.1.0" } diff --git a/machine/Croesus 0.4 nozzle.json b/machine/Croesus 0.4 nozzle.json index ac5324b..4d8c29f 100644 --- a/machine/Croesus 0.4 nozzle.json +++ b/machine/Croesus 0.4 nozzle.json @@ -8,11 +8,11 @@ "is_custom_defined": "0", "machine_end_gcode": "print_end", "machine_max_acceleration_x": [ - "5000", + "10000", "20000" ], "machine_max_acceleration_y": [ - "5000", + "10000", "20000" ], "machine_max_acceleration_z": [ @@ -28,11 +28,11 @@ "9" ], "machine_max_speed_x": [ - "180", + "450", "200" ], "machine_max_speed_y": [ - "180", + "450", "200" ], "machine_start_gcode": "M104 S0 ; Stops OrcaSlicer from sending temp waits separately\nM140 S0\nprint_start EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature]", diff --git a/process/0.08mm Extra Fine @Croesus.json b/process/0.08mm Extra Fine @Croesus.json index 1e4f5da..eae4fee 100644 --- a/process/0.08mm Extra Fine @Croesus.json +++ b/process/0.08mm Extra Fine @Croesus.json @@ -1,21 +1,20 @@ { "bridge_acceleration": "500", "brim_type": "no_brim", - "default_acceleration": "2000", + "default_acceleration": "4000", "filename_format": "{input_filename_base}.gcode", "from": "User", - "fuzzy_skin_point_distance": "0.1", - "fuzzy_skin_thickness": "0.1", + "fuzzy_skin_point_distance": "0.08", + "fuzzy_skin_thickness": "0.08", "gap_infill_speed": "30", "inherits": "0.08mm Extra Fine @MyKlipper", - "initial_layer_acceleration": "1000", + "initial_layer_acceleration": "2000", "initial_layer_infill_speed": "60", "initial_layer_print_height": "0.24", "initial_layer_speed": "30", - "inner_wall_acceleration": "1000", - "inner_wall_speed": "80", - "internal_solid_infill_acceleration": "2500", - "internal_solid_infill_speed": "120", + "inner_wall_acceleration": "2000", + "inner_wall_speed": "150", + "internal_solid_infill_acceleration": "5000", "ironing_flow": "35%", "ironing_spacing": "0.2", "ironing_speed": "180", @@ -23,7 +22,7 @@ "name": "0.08mm Extra Fine @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_acceleration": "500", + "outer_wall_acceleration": "1000", "outer_wall_speed": "80", "precise_outer_wall": "1", "print_settings_id": "0.08mm Extra Fine @Croesus", @@ -31,16 +30,16 @@ "skirt_loops": "1", "skirt_speed": "0", "small_perimeter_speed": "30", - "sparse_infill_acceleration": "5000", + "sparse_infill_acceleration": "7000", "sparse_infill_density": "40%", "sparse_infill_line_width": "160%", "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "180", + "sparse_infill_speed": "300", "support_speed": "120", - "top_surface_acceleration": "1000", + "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", - "travel_acceleration": "5000", - "travel_speed": "180", + "travel_acceleration": "10000", + "travel_speed": "450", "version": "2.1.1.0" } diff --git a/process/0.12mm Fine @Croesus.json b/process/0.12mm Fine @Croesus.json index b928e39..9b9ac84 100644 --- a/process/0.12mm Fine @Croesus.json +++ b/process/0.12mm Fine @Croesus.json @@ -1,21 +1,20 @@ { "bridge_acceleration": "500", "brim_type": "no_brim", - "default_acceleration": "2000", + "default_acceleration": "4000", "filename_format": "{input_filename_base}.gcode", "from": "User", - "fuzzy_skin_point_distance": "0.1", - "fuzzy_skin_thickness": "0.1", + "fuzzy_skin_point_distance": "0.12", + "fuzzy_skin_thickness": "0.12", "gap_infill_speed": "30", "inherits": "0.12mm Fine @MyKlipper", - "initial_layer_acceleration": "1000", + "initial_layer_acceleration": "2000", "initial_layer_infill_speed": "60", "initial_layer_print_height": "0.24", "initial_layer_speed": "30", - "inner_wall_acceleration": "1000", - "inner_wall_speed": "80", - "internal_solid_infill_acceleration": "2500", - "internal_solid_infill_speed": "120", + "inner_wall_acceleration": "2000", + "inner_wall_speed": "150", + "internal_solid_infill_acceleration": "5000", "ironing_flow": "35%", "ironing_spacing": "0.2", "ironing_speed": "180", @@ -23,7 +22,7 @@ "name": "0.12mm Fine @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_acceleration": "500", + "outer_wall_acceleration": "1000", "outer_wall_speed": "80", "precise_outer_wall": "1", "print_settings_id": "0.12mm Fine @Croesus", @@ -31,18 +30,16 @@ "skirt_loops": "1", "skirt_speed": "0", "small_perimeter_speed": "30", - "sparse_infill_acceleration": "5000", + "sparse_infill_acceleration": "7000", "sparse_infill_density": "40%", "sparse_infill_line_width": "160%", "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "180", - "support_bottom_z_distance": "0.12", + "sparse_infill_speed": "300", "support_speed": "120", - "support_top_z_distance": "0.12", - "top_surface_acceleration": "1000", + "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", - "travel_acceleration": "5000", - "travel_speed": "180", + "travel_acceleration": "10000", + "travel_speed": "450", "version": "2.1.1.0" } diff --git a/process/0.16mm Optimal @Croesus.json b/process/0.16mm Optimal @Croesus.json index 7ad1566..f07df80 100644 --- a/process/0.16mm Optimal @Croesus.json +++ b/process/0.16mm Optimal @Croesus.json @@ -1,21 +1,20 @@ { "bridge_acceleration": "500", "brim_type": "no_brim", - "default_acceleration": "2000", + "default_acceleration": "4000", "filename_format": "{input_filename_base}.gcode", "from": "User", - "fuzzy_skin_point_distance": "0.1", - "fuzzy_skin_thickness": "0.1", + "fuzzy_skin_point_distance": "0.16", + "fuzzy_skin_thickness": "0.16", "gap_infill_speed": "30", "inherits": "0.16mm Optimal @MyKlipper", - "initial_layer_acceleration": "1000", + "initial_layer_acceleration": "2000", "initial_layer_infill_speed": "60", "initial_layer_print_height": "0.24", "initial_layer_speed": "30", - "inner_wall_acceleration": "1000", - "inner_wall_speed": "80", - "internal_solid_infill_acceleration": "2500", - "internal_solid_infill_speed": "120", + "inner_wall_acceleration": "2000", + "inner_wall_speed": "150", + "internal_solid_infill_acceleration": "5000", "ironing_flow": "35%", "ironing_spacing": "0.2", "ironing_speed": "180", @@ -23,7 +22,7 @@ "name": "0.16mm Optimal @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_acceleration": "500", + "outer_wall_acceleration": "1000", "outer_wall_speed": "80", "precise_outer_wall": "1", "print_settings_id": "0.16mm Optimal @Croesus", @@ -31,16 +30,16 @@ "skirt_loops": "1", "skirt_speed": "0", "small_perimeter_speed": "30", - "sparse_infill_acceleration": "5000", + "sparse_infill_acceleration": "7000", "sparse_infill_density": "40%", "sparse_infill_line_width": "160%", "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "180", + "sparse_infill_speed": "300", "support_speed": "120", - "top_surface_acceleration": "1000", + "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", - "travel_acceleration": "5000", - "travel_speed": "180", + "travel_acceleration": "10000", + "travel_speed": "450", "version": "2.1.1.0" } diff --git a/process/0.20mm Standard @Croesus.json b/process/0.20mm Standard @Croesus.json index b57ce27..7df14ac 100644 --- a/process/0.20mm Standard @Croesus.json +++ b/process/0.20mm Standard @Croesus.json @@ -1,21 +1,20 @@ { "bridge_acceleration": "500", "brim_type": "no_brim", - "default_acceleration": "2000", + "default_acceleration": "4000", "filename_format": "{input_filename_base}.gcode", "from": "User", - "fuzzy_skin_point_distance": "0.1", - "fuzzy_skin_thickness": "0.1", + "fuzzy_skin_point_distance": "0.2", + "fuzzy_skin_thickness": "0.2", "gap_infill_speed": "30", "inherits": "0.20mm Standard @MyKlipper", - "initial_layer_acceleration": "1000", + "initial_layer_acceleration": "2000", "initial_layer_infill_speed": "60", "initial_layer_print_height": "0.24", "initial_layer_speed": "30", - "inner_wall_acceleration": "1000", - "inner_wall_speed": "80", - "internal_solid_infill_acceleration": "2500", - "internal_solid_infill_speed": "120", + "inner_wall_acceleration": "2000", + "inner_wall_speed": "150", + "internal_solid_infill_acceleration": "5000", "ironing_flow": "35%", "ironing_spacing": "0.2", "ironing_speed": "180", @@ -23,7 +22,7 @@ "name": "0.20mm Standard @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_acceleration": "500", + "outer_wall_acceleration": "1000", "outer_wall_speed": "80", "precise_outer_wall": "1", "print_settings_id": "0.20mm Standard @Croesus", @@ -31,16 +30,16 @@ "skirt_loops": "1", "skirt_speed": "0", "small_perimeter_speed": "30", - "sparse_infill_acceleration": "5000", + "sparse_infill_acceleration": "7000", "sparse_infill_density": "40%", "sparse_infill_line_width": "160%", "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "180", + "sparse_infill_speed": "300", "support_speed": "120", - "top_surface_acceleration": "1000", + "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", - "travel_acceleration": "5000", - "travel_speed": "180", + "travel_acceleration": "10000", + "travel_speed": "450", "version": "2.1.1.0" } diff --git a/process/0.24mm Draft @Croesus.json b/process/0.24mm Draft @Croesus.json index 0edd0c4..97195c4 100644 --- a/process/0.24mm Draft @Croesus.json +++ b/process/0.24mm Draft @Croesus.json @@ -1,21 +1,20 @@ { "bridge_acceleration": "500", "brim_type": "no_brim", - "default_acceleration": "2000", + "default_acceleration": "4000", "filename_format": "{input_filename_base}.gcode", "from": "User", - "fuzzy_skin_point_distance": "0.1", - "fuzzy_skin_thickness": "0.1", + "fuzzy_skin_point_distance": "0.24", + "fuzzy_skin_thickness": "0.24", "gap_infill_speed": "30", "inherits": "0.24mm Draft @MyKlipper", - "initial_layer_acceleration": "1000", + "initial_layer_acceleration": "2000", "initial_layer_infill_speed": "60", "initial_layer_print_height": "0.24", "initial_layer_speed": "30", - "inner_wall_acceleration": "1000", - "inner_wall_speed": "80", - "internal_solid_infill_acceleration": "2500", - "internal_solid_infill_speed": "120", + "inner_wall_acceleration": "2000", + "inner_wall_speed": "150", + "internal_solid_infill_acceleration": "5000", "ironing_flow": "35%", "ironing_spacing": "0.2", "ironing_speed": "180", @@ -23,7 +22,7 @@ "name": "0.24mm Draft @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_acceleration": "500", + "outer_wall_acceleration": "1000", "outer_wall_speed": "80", "precise_outer_wall": "1", "print_settings_id": "0.24mm Draft @Croesus", @@ -31,18 +30,16 @@ "skirt_loops": "1", "skirt_speed": "0", "small_perimeter_speed": "30", - "sparse_infill_acceleration": "5000", + "sparse_infill_acceleration": "7000", "sparse_infill_density": "40%", "sparse_infill_line_width": "160%", "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "180", - "support_bottom_z_distance": "0.24", + "sparse_infill_speed": "300", "support_speed": "120", - "support_top_z_distance": "0.24", - "top_surface_acceleration": "1000", + "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", - "travel_acceleration": "5000", - "travel_speed": "180", + "travel_acceleration": "10000", + "travel_speed": "450", "version": "2.1.1.0" } diff --git a/process/0.28mm Extra Draft @Croesus.json b/process/0.28mm Extra Draft @Croesus.json index dd98ca5..dd4f2dd 100644 --- a/process/0.28mm Extra Draft @Croesus.json +++ b/process/0.28mm Extra Draft @Croesus.json @@ -1,21 +1,20 @@ { "bridge_acceleration": "500", "brim_type": "no_brim", - "default_acceleration": "2000", + "default_acceleration": "4000", "filename_format": "{input_filename_base}.gcode", "from": "User", - "fuzzy_skin_point_distance": "0.1", - "fuzzy_skin_thickness": "0.1", + "fuzzy_skin_point_distance": "0.28", + "fuzzy_skin_thickness": "0.28", "gap_infill_speed": "30", "inherits": "0.28mm Extra Draft @MyKlipper", - "initial_layer_acceleration": "1000", + "initial_layer_acceleration": "2000", "initial_layer_infill_speed": "60", "initial_layer_print_height": "0.24", "initial_layer_speed": "30", - "inner_wall_acceleration": "1000", - "inner_wall_speed": "80", - "internal_solid_infill_acceleration": "2500", - "internal_solid_infill_speed": "120", + "inner_wall_acceleration": "2000", + "inner_wall_speed": "150", + "internal_solid_infill_acceleration": "5000", "ironing_flow": "35%", "ironing_spacing": "0.2", "ironing_speed": "180", @@ -23,7 +22,7 @@ "name": "0.28mm Extra Draft @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_acceleration": "500", + "outer_wall_acceleration": "1000", "outer_wall_speed": "80", "precise_outer_wall": "1", "print_settings_id": "0.28mm Extra Draft @Croesus", @@ -31,18 +30,16 @@ "skirt_loops": "1", "skirt_speed": "0", "small_perimeter_speed": "30", - "sparse_infill_acceleration": "5000", + "sparse_infill_acceleration": "7000", "sparse_infill_density": "40%", "sparse_infill_line_width": "160%", "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "180", - "support_bottom_z_distance": "0.28", + "sparse_infill_speed": "300", "support_speed": "120", - "support_top_z_distance": "0.28", - "top_surface_acceleration": "1000", + "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", - "travel_acceleration": "5000", - "travel_speed": "180", + "travel_acceleration": "10000", + "travel_speed": "450", "version": "2.1.1.0" }