OrcaSlicer-Profiles/process/0.16mm @Croesus.json

{
    "bottom_surface_pattern": "monotonicline",
    "brim_type": "no_brim",
    "filename_format": "{input_filename_base}.gcode",
    "from": "User",
    "fuzzy_skin_point_distance": "0.16",
    "fuzzy_skin_thickness": "0.16",
    "gap_infill_speed": "30",
    "infill_wall_overlap": "15%",
    "inherits": "0.16mm Optimal @MyKlipper",
    "initial_layer_infill_speed": "60",
    "initial_layer_print_height": "0.28",
    "initial_layer_speed": "30",
    "inner_wall_acceleration": "2000",
    "inner_wall_speed": "120",
    "internal_solid_infill_pattern": "monotonicline",
    "ironing_flow": "35%",
    "ironing_spacing": "0.2",
    "ironing_speed": "180",
    "is_custom_defined": "0",
    "name": "0.16mm @Croesus",
    "only_one_wall_first_layer": "1",
    "only_one_wall_top": "1",
    "outer_wall_acceleration": "1000",
    "outer_wall_speed": "80",
    "precise_outer_wall": "1",
    "print_settings_id": "0.16mm @Croesus",
    "skirt_height": "2",
    "skirt_loops": "1",
    "skirt_speed": "0",
    "small_perimeter_speed": "30",
    "sparse_infill_acceleration": "200%",
    "sparse_infill_density": "40%",
    "sparse_infill_line_width": "160%",
    "sparse_infill_pattern": "gyroid",
    "sparse_infill_speed": "300",
    "support_speed": "120",
    "top_surface_acceleration": "2000",
    "top_surface_line_width": "100%",
    "top_surface_speed": "60",
    "travel_speed": "450",
    "version": "2.1.1.0",
    "wall_generator": "classic"
}