remove lavender
This commit is contained in:
parent
f5e5a1a8c0
commit
cd68967354
|
|
@ -1,180 +0,0 @@
|
||||||
# This is your system's configuration file.
|
|
||||||
# Use this to configure your system environment (it replaces /etc/nixos/configuration.nix)
|
|
||||||
|
|
||||||
{ inputs, outputs, lib, config, pkgs, ... }: {
|
|
||||||
# You can import other NixOS modules here
|
|
||||||
imports = [
|
|
||||||
# If you want to use modules your own flake exports (from modules/nixos):
|
|
||||||
# outputs.nixosModules.example
|
|
||||||
|
|
||||||
# Or modules from other flakes (such as nixos-hardware):
|
|
||||||
# inputs.hardware.nixosModules.common-cpu-amd
|
|
||||||
# inputs.hardware.nixosModules.common-ssd
|
|
||||||
|
|
||||||
# Import common configurations
|
|
||||||
../common/system-tools.nix
|
|
||||||
|
|
||||||
# Import your generated (nixos-generate-config) hardware configuration
|
|
||||||
./hardware-configuration.nix
|
|
||||||
|
|
||||||
# Setup our 3D printer
|
|
||||||
./printer
|
|
||||||
|
|
||||||
# Import our docker containers
|
|
||||||
./containers
|
|
||||||
];
|
|
||||||
|
|
||||||
nixpkgs = {
|
|
||||||
# You can add overlays here
|
|
||||||
overlays = [
|
|
||||||
# Add overlays your own flake exports (from overlays and pkgs dir):
|
|
||||||
outputs.overlays.additions
|
|
||||||
outputs.overlays.modifications
|
|
||||||
outputs.overlays.unstable-packages
|
|
||||||
|
|
||||||
# You can also add overlays exported from other flakes:
|
|
||||||
# neovim-nightly-overlay.overlays.default
|
|
||||||
|
|
||||||
# Or define it inline, for example:
|
|
||||||
# (final: prev: {
|
|
||||||
# hi = final.hello.overrideAttrs (oldAttrs: {
|
|
||||||
# patches = [ ./change-hello-to-hi.patch ];
|
|
||||||
# });
|
|
||||||
# })
|
|
||||||
];
|
|
||||||
# Configure your nixpkgs instance
|
|
||||||
config = {
|
|
||||||
# Disable if you don't want unfree packages
|
|
||||||
allowUnfree = true;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
nix = {
|
|
||||||
gc = {
|
|
||||||
#Automatically run the garbage collector at a specific time.
|
|
||||||
automatic = true;
|
|
||||||
dates = "weekly";
|
|
||||||
options = "--delete-older-than 30d";
|
|
||||||
};
|
|
||||||
|
|
||||||
# This will add each flake input as a registry
|
|
||||||
# To make nix commands consistent with your flake
|
|
||||||
registry = lib.mapAttrs (_: value: { flake = value; }) inputs;
|
|
||||||
|
|
||||||
# This will additionally add your inputs to the system's legacy channels
|
|
||||||
# Making legacy nix commands consistent as well, awesome!
|
|
||||||
nixPath = lib.mapAttrsToList (key: value: "${key}=${value.to.path}") config.nix.registry;
|
|
||||||
|
|
||||||
settings = {
|
|
||||||
# Enable flakes and new 'nix' command
|
|
||||||
experimental-features = "nix-command flakes";
|
|
||||||
# Deduplicate and optimize nix store
|
|
||||||
auto-optimise-store = true;
|
|
||||||
};
|
|
||||||
|
|
||||||
# Free up to 1GiB whenever there is less than 100MiB left.
|
|
||||||
extraOptions = ''
|
|
||||||
min-free = ${toString (100 * 1024 * 1024)}
|
|
||||||
max-free = ${toString (1024 * 1024 * 1024)}
|
|
||||||
'';
|
|
||||||
};
|
|
||||||
|
|
||||||
# Select internationalisation properties
|
|
||||||
i18n.defaultLocale = "en_AU.UTF-8";
|
|
||||||
# Set timezone
|
|
||||||
time.timeZone = "Australia/Perth";
|
|
||||||
|
|
||||||
boot = {
|
|
||||||
# Kernel to install
|
|
||||||
kernelPackages = pkgs.linuxPackages_rpi4;
|
|
||||||
# ttyAMA0 is the serial console broken out to the GPIO
|
|
||||||
kernelParams = [
|
|
||||||
"8250.nr_uarts=1"
|
|
||||||
"console=ttyAMA0,115200"
|
|
||||||
"console=tty1"
|
|
||||||
# A lot of GUI programs need this, nearly all wayland applications
|
|
||||||
"cma=128M"
|
|
||||||
];
|
|
||||||
loader = {
|
|
||||||
# Use the extlinux boot loader. (NixOS wants to enable GRUB by default)
|
|
||||||
grub.enable = false;
|
|
||||||
# Enables the generation of /boot/extlinux/extlinux.conf
|
|
||||||
generic-extlinux-compatible.enable = true;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
hardware = {
|
|
||||||
# Required for the Wireless firmware
|
|
||||||
enableRedistributableFirmware = true;
|
|
||||||
};
|
|
||||||
|
|
||||||
networking = {
|
|
||||||
hostName = "lavender";
|
|
||||||
domain = "kanto.dev";
|
|
||||||
networkmanager.enable = true;
|
|
||||||
firewall = {
|
|
||||||
enable = true;
|
|
||||||
allowedTCPPorts = [
|
|
||||||
53 # pihole-FTL (DNS)
|
|
||||||
80 # traefik (HTTP)
|
|
||||||
443 # traefik (HTTPS)
|
|
||||||
32400 # plex
|
|
||||||
32372 # qbittorrent
|
|
||||||
];
|
|
||||||
allowedUDPPorts = [
|
|
||||||
53 # pihole-FTL (DNS)
|
|
||||||
80 # traefik (HTTP)
|
|
||||||
443 # traefik (HTTPS)
|
|
||||||
32400 # plex
|
|
||||||
32372 # qbittorrent
|
|
||||||
];
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
environment = {
|
|
||||||
# Install packages, prefix with 'unstable' to use overlay.
|
|
||||||
systemPackages = with pkgs; [
|
|
||||||
libraspberrypi
|
|
||||||
raspberrypi-eeprom
|
|
||||||
];
|
|
||||||
|
|
||||||
# Completions for system packages
|
|
||||||
pathsToLink = [ "/share/zsh" ];
|
|
||||||
};
|
|
||||||
|
|
||||||
# Some programs need SUID wrappers, can be configured further or are
|
|
||||||
# started in user sessions.
|
|
||||||
programs = {
|
|
||||||
zsh.enable = true;
|
|
||||||
gnupg.agent = {
|
|
||||||
enable = true;
|
|
||||||
enableSSHSupport = true;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
# List services that you want to enable:
|
|
||||||
services = {
|
|
||||||
# Enable the OpenSSH daemon.
|
|
||||||
openssh = {
|
|
||||||
enable = true;
|
|
||||||
settings = {
|
|
||||||
# Disable root login.
|
|
||||||
PermitRootLogin = "no";
|
|
||||||
# Disable password login (Require keys).
|
|
||||||
PasswordAuthentication = false;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
# Define a user account. Don't forget to set a password with ‘passwd’.
|
|
||||||
users.users.admin = {
|
|
||||||
isNormalUser = true;
|
|
||||||
extraGroups = [ "networkmanager" "wheel" "docker" ];
|
|
||||||
shell = pkgs.zsh;
|
|
||||||
openssh.authorizedKeys.keyFiles = [ ../fuchsia/id_ed25519_sk.pub ];
|
|
||||||
};
|
|
||||||
|
|
||||||
# https://nixos.wiki/wiki/FAQ/When_do_I_update_stateVersion
|
|
||||||
system.stateVersion = "22.11";
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
@ -1,41 +0,0 @@
|
||||||
# Do not modify this file! It was generated by ‘nixos-generate-config’
|
|
||||||
# and may be overwritten by future invocations. Please make changes
|
|
||||||
# to /etc/nixos/configuration.nix instead.
|
|
||||||
{ config, lib, pkgs, modulesPath, ... }:
|
|
||||||
|
|
||||||
{
|
|
||||||
imports =
|
|
||||||
[ (modulesPath + "/installer/scan/not-detected.nix")
|
|
||||||
];
|
|
||||||
|
|
||||||
boot.initrd.availableKernelModules = [ "xhci_pci" "usbhid" "usb_storage" ];
|
|
||||||
boot.initrd.kernelModules = [ ];
|
|
||||||
boot.kernelModules = [ ];
|
|
||||||
boot.extraModulePackages = [ ];
|
|
||||||
|
|
||||||
fileSystems."/" =
|
|
||||||
{ device = "/dev/disk/by-uuid/44444444-4444-4444-8888-888888888888";
|
|
||||||
fsType = "ext4";
|
|
||||||
};
|
|
||||||
|
|
||||||
fileSystems."/srv/data" =
|
|
||||||
{ device = "/dev/disk/by-uuid/3548fbc6-6efd-4ed1-acc1-bd3ffed9d7a7";
|
|
||||||
fsType = "ext4";
|
|
||||||
};
|
|
||||||
|
|
||||||
swapDevices = [{
|
|
||||||
device = "/var/lib/swapfile";
|
|
||||||
size = 2048;
|
|
||||||
}];
|
|
||||||
|
|
||||||
# Enables DHCP on each ethernet and wireless interface. In case of scripted networking
|
|
||||||
# (the default) this is the recommended approach. When using systemd-networkd it's
|
|
||||||
# still possible to use this option, but it's recommended to use it in conjunction
|
|
||||||
# with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
|
|
||||||
networking.useDHCP = lib.mkDefault true;
|
|
||||||
# networking.interfaces.eth0.useDHCP = lib.mkDefault true;
|
|
||||||
# networking.interfaces.wlan0.useDHCP = lib.mkDefault true;
|
|
||||||
|
|
||||||
nixpkgs.hostPlatform = lib.mkDefault "aarch64-linux";
|
|
||||||
powerManagement.cpuFreqGovernor = lib.mkDefault "ondemand";
|
|
||||||
}
|
|
||||||
|
|
@ -1,53 +0,0 @@
|
||||||
{ ... }:
|
|
||||||
|
|
||||||
{
|
|
||||||
# Klipper is a 3d-Printer firmware.
|
|
||||||
# It combines the power of a general purpose computer with one or more micro-controllers.
|
|
||||||
services.klipper = {
|
|
||||||
enable = true;
|
|
||||||
# Setup User:Group
|
|
||||||
user = "root";
|
|
||||||
group = "root";
|
|
||||||
# Klipper configuration
|
|
||||||
configFile = ./printer.cfg;
|
|
||||||
};
|
|
||||||
|
|
||||||
# Moonraker is a Python 3 based web server
|
|
||||||
# Exposes APIs with which client applications may use to interact with the 3D printing firmware Klipper.
|
|
||||||
services.moonraker = {
|
|
||||||
enable = true;
|
|
||||||
# Setup User:Group
|
|
||||||
user = "root";
|
|
||||||
group = "root";
|
|
||||||
# Listen address and port
|
|
||||||
address = "0.0.0.0";
|
|
||||||
port = 7125;
|
|
||||||
# Moonraker configuration
|
|
||||||
settings.authorization = {
|
|
||||||
force_logins = false;
|
|
||||||
cors_domains = [
|
|
||||||
"https://fluidd.kanto.dev"
|
|
||||||
];
|
|
||||||
trusted_clients = [
|
|
||||||
"10.0.0.0/8"
|
|
||||||
"127.0.0.0/8"
|
|
||||||
"192.168.1.0/24"
|
|
||||||
];
|
|
||||||
};
|
|
||||||
# Moonraker exposes APIs to perform system-level operations, such as reboot, shutdown, and management of systemd units.
|
|
||||||
allowSystemControl = true;
|
|
||||||
};
|
|
||||||
|
|
||||||
# Fluidd is a free and open-source Klipper web interface for managing your 3d printer.
|
|
||||||
services.fluidd = {
|
|
||||||
enable = true;
|
|
||||||
# Listen address and port
|
|
||||||
nginx.listen = [{
|
|
||||||
addr = "192.168.1.100";
|
|
||||||
port = 4624;
|
|
||||||
}];
|
|
||||||
};
|
|
||||||
|
|
||||||
# Allow uploads > 1MB to fluidd
|
|
||||||
services.nginx.clientMaxBodySize = "1000m";
|
|
||||||
}
|
|
||||||
|
|
@ -1,279 +0,0 @@
|
||||||
# This file contains pin mappings for the stock 2022 Creality Ender 3
|
|
||||||
# V2 Neo. To use this config, during "make menuconfig" select the
|
|
||||||
# STM32F103 with a "28KiB bootloader" and serial (on USART1 PA10/PA9)
|
|
||||||
# communication.
|
|
||||||
|
|
||||||
# If you prefer a direct serial connection, in "make menuconfig"
|
|
||||||
# select "Enable extra low-level configuration options" and select
|
|
||||||
# serial (on USART3 PB11/PB10), which is broken out on the 10 pin IDC
|
|
||||||
# cable used for the LCD module as follows:
|
|
||||||
# 3: Tx, 4: Rx, 9: GND, 10: VCC
|
|
||||||
|
|
||||||
# Flash this firmware by copying "out/klipper.bin" to a SD card and
|
|
||||||
# turning on the printer with the card inserted. The firmware
|
|
||||||
# filename must end in ".bin" and must not match the last filename
|
|
||||||
# that was flashed.
|
|
||||||
|
|
||||||
# This also works for the GD32F303 based Creality 4.2.2 board.
|
|
||||||
|
|
||||||
# See docs/Config_Reference.md for a description of parameters.
|
|
||||||
|
|
||||||
[stepper_x]
|
|
||||||
step_pin: PC2
|
|
||||||
dir_pin: PB9
|
|
||||||
enable_pin: !PC3
|
|
||||||
microsteps: 16
|
|
||||||
rotation_distance: 40
|
|
||||||
endstop_pin: ^PA5
|
|
||||||
position_endstop: 0
|
|
||||||
position_max: 235
|
|
||||||
homing_speed: 80
|
|
||||||
|
|
||||||
[stepper_y]
|
|
||||||
step_pin: PB8
|
|
||||||
dir_pin: PB7
|
|
||||||
enable_pin: !PC3
|
|
||||||
microsteps: 16
|
|
||||||
rotation_distance: 40
|
|
||||||
endstop_pin: ^PA6
|
|
||||||
position_endstop: 0
|
|
||||||
position_max: 235
|
|
||||||
homing_speed: 80
|
|
||||||
|
|
||||||
[stepper_z]
|
|
||||||
step_pin: PB6
|
|
||||||
dir_pin: !PB5
|
|
||||||
enable_pin: !PC3
|
|
||||||
microsteps: 16
|
|
||||||
rotation_distance: 8
|
|
||||||
endstop_pin: probe:z_virtual_endstop
|
|
||||||
position_max: 250
|
|
||||||
homing_speed: 4
|
|
||||||
second_homing_speed: 1
|
|
||||||
homing_retract_dist: 2.0
|
|
||||||
|
|
||||||
[extruder]
|
|
||||||
max_extrude_only_distance: 100.0
|
|
||||||
step_pin: PB4
|
|
||||||
dir_pin: PB3
|
|
||||||
enable_pin: !PC3
|
|
||||||
microsteps: 16
|
|
||||||
rotation_distance: 34.406
|
|
||||||
nozzle_diameter: 0.400
|
|
||||||
filament_diameter: 1.750
|
|
||||||
heater_pin: PA1
|
|
||||||
sensor_type: EPCOS 100K B57560G104F
|
|
||||||
sensor_pin: PC5
|
|
||||||
control: pid
|
|
||||||
# tuned for stock hardware with 200 degree Celsius target
|
|
||||||
pid_Kp: 26.120
|
|
||||||
pid_Ki: 1.741
|
|
||||||
pid_Kd: 97.951
|
|
||||||
min_temp: 0
|
|
||||||
max_temp: 250
|
|
||||||
|
|
||||||
[heater_bed]
|
|
||||||
heater_pin: PA2
|
|
||||||
sensor_type: EPCOS 100K B57560G104F
|
|
||||||
sensor_pin: PC4
|
|
||||||
control: pid
|
|
||||||
# tuned for stock hardware with 70 degree Celsius target
|
|
||||||
pid_kp: 70.073
|
|
||||||
pid_ki: 1.229
|
|
||||||
pid_kd: 998.534
|
|
||||||
min_temp: 0
|
|
||||||
max_temp: 130
|
|
||||||
|
|
||||||
[fan]
|
|
||||||
pin: PA0
|
|
||||||
|
|
||||||
[mcu]
|
|
||||||
serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
|
|
||||||
restart_method: command
|
|
||||||
|
|
||||||
[printer]
|
|
||||||
kinematics: cartesian
|
|
||||||
max_velocity: 300
|
|
||||||
max_accel: 5000
|
|
||||||
max_z_velocity: 5
|
|
||||||
square_corner_velocity: 5.0
|
|
||||||
max_z_accel: 100
|
|
||||||
|
|
||||||
[bltouch]
|
|
||||||
sensor_pin: ^PB1
|
|
||||||
control_pin: PB0
|
|
||||||
x_offset: -40.0
|
|
||||||
y_offset: -12.0
|
|
||||||
z_offset: 1.72
|
|
||||||
speed: 20
|
|
||||||
samples: 1
|
|
||||||
sample_retract_dist: 8.0
|
|
||||||
|
|
||||||
[safe_z_home]
|
|
||||||
home_xy_position: 160,120
|
|
||||||
speed: 150
|
|
||||||
z_hop: 10
|
|
||||||
z_hop_speed: 10
|
|
||||||
|
|
||||||
[bed_mesh]
|
|
||||||
speed: 120
|
|
||||||
mesh_min: 30,30 # Need to handle head distance with cr-touch (bl_touch)
|
|
||||||
mesh_max: 189,189 # Max probe range
|
|
||||||
probe_count: 5,5
|
|
||||||
fade_start: 1
|
|
||||||
fade_end: 10
|
|
||||||
fade_target: 0
|
|
||||||
algorithm: bicubic
|
|
||||||
|
|
||||||
[bed_screws]
|
|
||||||
screw1:30,25
|
|
||||||
screw1_name:1
|
|
||||||
screw2:200,25
|
|
||||||
screw2_name:2
|
|
||||||
screw3:200,195
|
|
||||||
screw3_name:3
|
|
||||||
screw4:30,195
|
|
||||||
screw4_name:4
|
|
||||||
|
|
||||||
[screws_tilt_adjust]
|
|
||||||
screw1: 80, 50
|
|
||||||
screw1_name: front left screw
|
|
||||||
screw2: 235, 50
|
|
||||||
screw2_name: front right screw
|
|
||||||
screw3: 235, 208
|
|
||||||
screw3_name: rear right screw
|
|
||||||
screw4: 80, 208
|
|
||||||
screw4_name: rear left screw
|
|
||||||
horizontal_move_z: 10
|
|
||||||
speed: 200
|
|
||||||
screw_thread: CW-M4 # Use CW for Clockwise and CCW for Counter Clockwise
|
|
||||||
|
|
||||||
# [display]
|
|
||||||
# The Ender 3 v2 Neo's 4.3" LCD display is not supported by klipper
|
|
||||||
|
|
||||||
[output_pin beeper]
|
|
||||||
pin: PB13
|
|
||||||
|
|
||||||
# Replace the slicer's custom start and end g-code scripts with
|
|
||||||
# START_PRINT and END_PRINT. See docs/Slicers.md for more information on using these macros.
|
|
||||||
[gcode_macro START_PRINT]
|
|
||||||
gcode:
|
|
||||||
{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
|
|
||||||
{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(200)|float %}
|
|
||||||
# Start bed heating
|
|
||||||
M140 S{BED_TEMP}
|
|
||||||
# Use absolute coordinates
|
|
||||||
G90
|
|
||||||
# Reset the G-Code Z offset (adjust Z offset if needed)
|
|
||||||
SET_GCODE_OFFSET Z=0.0
|
|
||||||
# Home the printer
|
|
||||||
G28
|
|
||||||
# Wait for bed to reach temperature
|
|
||||||
M190 S{BED_TEMP}
|
|
||||||
# Perform bed mesh leveling
|
|
||||||
BED_MESH_CALIBRATE
|
|
||||||
# Set and wait for nozzle to reach temperature
|
|
||||||
M109 S{EXTRUDER_TEMP}
|
|
||||||
# Cura slicer purge line
|
|
||||||
G92 E0 # Reset Extruder
|
|
||||||
G1 Z2.0 F3000 # Move Z Axis up little to prevent scratching of Heat Bed
|
|
||||||
G1 X10.1 Y20 Z0.3 F5000.0 # Move to start position
|
|
||||||
G1 X10.1 Y200.0 Z0.3 F1500.0 E15 # Draw the first line
|
|
||||||
G1 X10.4 Y200.0 Z0.3 F5000.0 # Move to side a little
|
|
||||||
G1 X10.4 Y20 Z0.3 F1500.0 E30 # Draw the second line
|
|
||||||
G92 E0 # Reset Extruder
|
|
||||||
G1 Z2.0 F3000 # Move Z Axis up little to prevent scratching of Heat Bed
|
|
||||||
G1 X15 Y20 Z0.3 F5000.0 # Move over to prevent blob squish
|
|
||||||
|
|
||||||
[gcode_macro END_PRINT]
|
|
||||||
gcode:
|
|
||||||
# Turn off bed, extruder, and fan
|
|
||||||
M140 S0
|
|
||||||
M104 S0
|
|
||||||
M106 S0
|
|
||||||
# Move nozzle away from print while retracting
|
|
||||||
G91
|
|
||||||
G1 X-2 Y-2 E-3 F300
|
|
||||||
# Raise nozzle by 10mm
|
|
||||||
G1 Z10 F3000
|
|
||||||
G90
|
|
||||||
# Disable steppers
|
|
||||||
M84
|
|
||||||
|
|
||||||
# Fluidd initial setup
|
|
||||||
|
|
||||||
# Allows file uploads to work correctly.
|
|
||||||
[virtual_sdcard]
|
|
||||||
path: /var/lib/moonraker/gcodes
|
|
||||||
|
|
||||||
# Required to properly support display updates in fluidd
|
|
||||||
[display_status]
|
|
||||||
|
|
||||||
# Enables Pause / Resume functionality within klipper.
|
|
||||||
[pause_resume]
|
|
||||||
|
|
||||||
# These can be assumed sane defaults, but should be checked and modified to your own needs.
|
|
||||||
[gcode_macro PAUSE]
|
|
||||||
description: Pause the actual running print
|
|
||||||
rename_existing: PAUSE_BASE
|
|
||||||
# change this if you need more or less extrusion
|
|
||||||
variable_extrude: 1.0
|
|
||||||
gcode:
|
|
||||||
##### read E from pause macro #####
|
|
||||||
{% set E = printer["gcode_macro PAUSE"].extrude|float %}
|
|
||||||
##### set park positon for x and y #####
|
|
||||||
# default is your max posion from your printer.cfg
|
|
||||||
{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
|
|
||||||
{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
|
|
||||||
##### calculate save lift position #####
|
|
||||||
{% set max_z = printer.toolhead.axis_maximum.z|float %}
|
|
||||||
{% set act_z = printer.toolhead.position.z|float %}
|
|
||||||
{% if act_z < (max_z - 2.0) %}
|
|
||||||
{% set z_safe = 2.0 %}
|
|
||||||
{% else %}
|
|
||||||
{% set z_safe = max_z - act_z %}
|
|
||||||
{% endif %}
|
|
||||||
##### end of definitions #####
|
|
||||||
PAUSE_BASE
|
|
||||||
G91
|
|
||||||
{% if printer.extruder.can_extrude|lower == 'true' %}
|
|
||||||
G1 E-{E} F2100
|
|
||||||
{% else %}
|
|
||||||
{action_respond_info("Extruder not hot enough")}
|
|
||||||
{% endif %}
|
|
||||||
{% if "xyz" in printer.toolhead.homed_axes %}
|
|
||||||
G1 Z{z_safe} F900
|
|
||||||
G90
|
|
||||||
G1 X{x_park} Y{y_park} F6000
|
|
||||||
{% else %}
|
|
||||||
{action_respond_info("Printer not homed")}
|
|
||||||
{% endif %}
|
|
||||||
|
|
||||||
[gcode_macro RESUME]
|
|
||||||
description: Resume the actual running print
|
|
||||||
rename_existing: RESUME_BASE
|
|
||||||
gcode:
|
|
||||||
##### read E from pause macro #####
|
|
||||||
{% set E = printer["gcode_macro PAUSE"].extrude|float %}
|
|
||||||
#### get VELOCITY parameter if specified ####
|
|
||||||
{% if 'VELOCITY' in params|upper %}
|
|
||||||
{% set get_params = ('VELOCITY=' + params.VELOCITY) %}
|
|
||||||
{%else %}
|
|
||||||
{% set get_params = "" %}
|
|
||||||
{% endif %}
|
|
||||||
##### end of definitions #####
|
|
||||||
{% if printer.extruder.can_extrude|lower == 'true' %}
|
|
||||||
G91
|
|
||||||
G1 E{E} F2100
|
|
||||||
{% else %}
|
|
||||||
{action_respond_info("Extruder not hot enough")}
|
|
||||||
{% endif %}
|
|
||||||
RESUME_BASE {get_params}
|
|
||||||
|
|
||||||
[gcode_macro CANCEL_PRINT]
|
|
||||||
description: Cancel the actual running print
|
|
||||||
rename_existing: CANCEL_PRINT_BASE
|
|
||||||
gcode:
|
|
||||||
TURN_OFF_HEATERS
|
|
||||||
CANCEL_PRINT_BASE
|
|
||||||
|
|
||||||
Loading…
Reference in a new issue