diff --git a/nixos/lavender/configuration.nix b/nixos/lavender/configuration.nix
index 5b76741..c8fbe3f 100644
--- a/nixos/lavender/configuration.nix
+++ b/nixos/lavender/configuration.nix
@@ -11,14 +11,17 @@
     # inputs.hardware.nixosModules.common-cpu-amd
     # inputs.hardware.nixosModules.common-ssd
 
-    # You can also split up your configuration and import pieces of it here:
-    ./containers
-
     # Import common configurations
     ../common/system-tools.nix
 
     # Import your generated (nixos-generate-config) hardware configuration
     ./hardware-configuration.nix
+
+    # Setup our 3D printer
+    ./printer
+
+    # Import our docker containers
+    ./containers
   ];
   
   nixpkgs = {
@@ -129,6 +132,12 @@
   };
   
   environment = {
+    # Install packages, prefix with 'unstable' to use overlay.
+    systemPackages = with pkgs; [
+      libraspberrypi
+      raspberrypi-eeprom
+    ];
+
     # Completions for system packages
     pathsToLink = [ "/share/zsh" ];
   };
diff --git a/nixos/lavender/printer/default.nix b/nixos/lavender/printer/default.nix
new file mode 100644
index 0000000..5501b4b
--- /dev/null
+++ b/nixos/lavender/printer/default.nix
@@ -0,0 +1,50 @@
+{ ... }:
+
+{
+  # Klipper is a 3d-Printer firmware.
+  # It combines the power of a general purpose computer with one or more micro-controllers. 
+  services.klipper = {
+    enable = true;
+    # Setup User:Group
+    user = "root";
+    group = "root";
+    # Klipper configuration
+    configFile = ./printer.cfg;
+  };
+  
+  # Moonraker is a Python 3 based web server
+  # Exposes APIs with which client applications may use to interact with the 3D printing firmware Klipper. 
+  services.moonraker = {
+    enable = true;
+    # Setup User:Group
+    user = "root";
+    group = "root";
+    # Listen address and port
+    address = "0.0.0.0";
+    port = 7125;
+    # Moonraker configuration
+    settings.authorization = {
+      force_logins = false;
+      cors_domains = [
+        "https://fluidd.kanto.dev"
+      ];
+      trusted_clients = [
+        "10.0.0.0/8"
+        "127.0.0.0/8"
+        "192.168.1.0/24"
+      ];
+    };
+    # Moonraker exposes APIs to perform system-level operations, such as reboot, shutdown, and management of systemd units.
+    allowSystemControl = true;
+  };
+
+  # Fluidd is a free and open-source Klipper web interface for managing your 3d printer.
+  services.fluidd = {
+    enable = true;
+    # Listen address and port  
+    nginx.listen = [{
+      addr = "192.168.1.100";
+      port = 4624;
+    }];
+  };
+}
diff --git a/nixos/lavender/printer/printer.cfg b/nixos/lavender/printer/printer.cfg
new file mode 100644
index 0000000..453294c
--- /dev/null
+++ b/nixos/lavender/printer/printer.cfg
@@ -0,0 +1,233 @@
+# This file contains pin mappings for the stock 2022 Creality Ender 3
+# V2 Neo. To use this config, during "make menuconfig" select the
+# STM32F103 with a "28KiB bootloader" and serial (on USART1 PA10/PA9)
+# communication.
+
+# If you prefer a direct serial connection, in "make menuconfig"
+# select "Enable extra low-level configuration options" and select
+# serial (on USART3 PB11/PB10), which is broken out on the 10 pin IDC
+# cable used for the LCD module as follows:
+# 3: Tx, 4: Rx, 9: GND, 10: VCC
+
+# Flash this firmware by copying "out/klipper.bin" to a SD card and
+# turning on the printer with the card inserted. The firmware
+# filename must end in ".bin" and must not match the last filename
+# that was flashed.
+
+# This also works for the GD32F303 based Creality 4.2.2 board.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC2
+dir_pin: PB9
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA5
+position_endstop: 0
+position_max: 235
+homing_speed: 80
+
+[stepper_y]
+step_pin: PB8
+dir_pin: PB7
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA6
+position_endstop: 0
+position_max: 235
+homing_speed: 80
+
+[stepper_z]
+step_pin: PB6
+dir_pin: !PB5
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 8
+endstop_pin: probe:z_virtual_endstop
+position_max: 250
+homing_speed: 4
+second_homing_speed: 1
+homing_retract_dist: 2.0
+
+[extruder]
+max_extrude_only_distance: 100.0
+step_pin: PB4
+dir_pin: PB3
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 34.406
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA1
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC5
+control: pid
+# tuned for stock hardware with 200 degree Celsius target
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PA2
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC4
+control: pid
+# tuned for stock hardware with 70 degree Celsius target
+pid_kp: 70.405
+pid_ki: 1.229
+pid_kd: 1008.553
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA0
+
+[mcu]
+serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
+restart_method: command
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 5000
+max_z_velocity: 5
+square_corner_velocity: 5.0
+max_z_accel: 100
+
+[bltouch]
+sensor_pin: ^PB1
+control_pin: PB0
+x_offset: -45.0
+y_offset: -10.0
+z_offset: 0
+speed: 20
+samples: 1
+sample_retract_dist: 8.0
+
+[safe_z_home]
+home_xy_position: 160,120
+speed: 150
+z_hop: 10
+z_hop_speed: 10
+
+[bed_mesh]
+speed: 120
+mesh_min: 30,30         # Need to handle head distance with cr-touch (bl_touch)
+mesh_max: 189,189       # Max probe range
+probe_count: 5,5
+fade_start: 1
+fade_end: 10
+fade_target: 0
+algorithm: bicubic
+
+[bed_screws]
+screw1:30,25
+screw1_name:1
+screw2:200,25
+screw2_name:2
+screw3:200,195
+screw3_name:3
+screw4:30,195
+screw4_name:4
+
+[screws_tilt_adjust]
+screw1: 67, 42
+screw1_name: front left screw
+screw2: 237.60, 42
+screw2_name: front right screw
+screw3: 237.60, 212
+screw3_name: rear right screw
+screw4: 67.60, 212
+screw4_name: rear left screw
+horizontal_move_z: 10
+speed: 200
+screw_thread: CW-M4 # Use CW for Clockwise and CCW for Counter Clockwise
+
+# [display]
+# The Ender 3 v2 Neo's 4.3" LCD display is not supported by klipper
+
+[output_pin beeper]
+pin: PB13
+
+# Fluidd initial setup
+
+# Allows file uploads to work correctly.
+[virtual_sdcard]
+path: /var/lib/moonraker/gcodes
+
+# Required to properly support display updates in fluidd
+[display_status]
+
+# Enables Pause / Resume functionality within klipper.
+[pause_resume]
+
+# These can be assumed sane defaults, but should be checked and modified to your own needs.
+[gcode_macro PAUSE]
+description: Pause the actual running print
+rename_existing: PAUSE_BASE
+# change this if you need more or less extrusion
+variable_extrude: 1.0
+gcode:
+  ##### read E from pause macro #####
+  {% set E = printer["gcode_macro PAUSE"].extrude|float %}
+  ##### set park positon for x and y #####
+  # default is your max posion from your printer.cfg
+  {% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
+  {% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
+  ##### calculate save lift position #####
+  {% set max_z = printer.toolhead.axis_maximum.z|float %}
+  {% set act_z = printer.toolhead.position.z|float %}
+  {% if act_z < (max_z - 2.0) %}
+      {% set z_safe = 2.0 %}
+  {% else %}
+      {% set z_safe = max_z - act_z %}
+  {% endif %}
+  ##### end of definitions #####
+  PAUSE_BASE
+  G91
+  {% if printer.extruder.can_extrude|lower == 'true' %}
+    G1 E-{E} F2100
+  {% else %}
+    {action_respond_info("Extruder not hot enough")}
+  {% endif %}
+  {% if "xyz" in printer.toolhead.homed_axes %}
+    G1 Z{z_safe} F900
+    G90
+    G1 X{x_park} Y{y_park} F6000
+  {% else %}
+    {action_respond_info("Printer not homed")}
+  {% endif %} 
+
+[gcode_macro RESUME]
+description: Resume the actual running print
+rename_existing: RESUME_BASE
+gcode:
+  ##### read E from pause macro #####
+  {% set E = printer["gcode_macro PAUSE"].extrude|float %}
+  #### get VELOCITY parameter if specified ####
+  {% if 'VELOCITY' in params|upper %}
+    {% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
+  {%else %}
+    {% set get_params = "" %}
+  {% endif %}
+  ##### end of definitions #####
+  {% if printer.extruder.can_extrude|lower == 'true' %}
+    G91
+    G1 E{E} F2100
+  {% else %}
+    {action_respond_info("Extruder not hot enough")}
+  {% endif %}  
+  RESUME_BASE {get_params}
+
+[gcode_macro CANCEL_PRINT]
+description: Cancel the actual running print
+rename_existing: CANCEL_PRINT_BASE
+gcode:
+  TURN_OFF_HEATERS
+  CANCEL_PRINT_BASE
+