setup jade

config/xmonad/xmonad.hs

@@ -1,157 +0,0 @@
--- Base
-import XMonad
-import System.Exit
-import qualified XMonad.StackSet as W
-
--- Actions
-import XMonad.Actions.CycleWS
-
--- Hooks
-import XMonad.Hooks.EwmhDesktops
-
--- Layouts
-import XMonad.Layout.ThreeColumns
-
--- Layout modifiers
-import XMonad.Layout.Spacing
-import XMonad.Layout.Renamed
-
--- Utilities
-import XMonad.Util.EZConfig (additionalKeysP)
-
--- xmobar dependencies
-import XMonad.Hooks.DynamicLog
-import XMonad.Hooks.StatusBar
-import XMonad.Hooks.StatusBar.PP
-import XMonad.Util.Loggers
-
--- | Configuration
-myTerminal           = "wezterm"
-myModMask            = mod4Mask
-myBorderWidth        = 5
-myNormalBorderColor  = "#282828"
-myFocusedBorderColor = "#282828"
-myWorkspaces         = ["code", "chat", "web", "games", "misc"]
-
--- | Keybindings
-myKeys =
-    -- launching and killing programs
-    [ ("M-n"            , spawn myTerminal                 ) -- %! Launch terminal
-    , ("M-e"            , spawn "dmenu_run"                ) -- %! Launch dmenu
-    , ("M-C-w"          , kill                             ) -- %! Close the focused window
-    -- layouts
-    , ("M-<Space>"      , sendMessage NextLayout           ) -- %! Rotate through the available layout algorithms
-    -- move focus up or down the window stack
-    , ("M-<Down>"       , windows W.focusDown              ) -- %! Move focus to the next window
-    , ("M-<Up>"         , windows W.focusUp                ) -- %! Move focus to the previous window
-    , ("M-<Return>"     , windows W.focusMaster            ) -- %! Move focus to the master window 
-    -- modifying the window order
-    , ("M-S-<Down>"     , windows W.swapDown               ) -- %! Swap the focused window with the next window
-    , ("M-S-<Up>"       , windows W.swapUp                 ) -- %! Swap the focused window with the previous window
-    , ("M-S-<Return>"   , windows W.swapMaster             ) -- %! Swap the focused window with the master window
-    -- resizing the master/slave ratio
-    , ("M-<Page_Up>"    , sendMessage Expand               ) -- %! Expand the master area
-    , ("M-<Page_Down>"  , sendMessage Shrink               ) -- %! Shrink the master area
-    -- number of windows in the master area
-    , ("M-S-<Page_Up>"  , sendMessage (IncMasterN 1)       ) -- %! Increase the number of windows in the master area
-    , ("M-S-<Page_Down>", sendMessage (IncMasterN (-1))    ) -- %! Decrease the number of windows in the master area
-    -- floating layer support
-    , ("M-t"            , withFocused $ windows . W.sink   ) -- %! Push window back into tiling
-    -- workspace navigation
-    , ("M-<Right>"      , moveTo Next hiddenWS             ) -- %! Move focus to the next hidden workspace
-    , ("M-<Left>"       , moveTo Prev hiddenWS             ) -- %! Move focus to the previous hidden workspace
-    -- move window to workspace
-    , ("M-S-<Right>"    , shiftTo Next hiddenWS            ) -- %! Move focused window to the next hidden workspace
-    , ("M-S-<Left)"     , shiftTo Prev hiddenWS            ) -- %! Move focused window to the previous hidden workspace
-    -- move focus up or down the screen stack
-    , ("M-<End>"        , nextScreen                       ) -- %! Move focus to the next screen
-    , ("M-<Home>"       , prevScreen                       ) -- %! Move focus to the previous screen
-    -- move windows between screens
-    , ("M-S-<End>"      , shiftNextScreen                  ) -- %! Move focused window to the next screen
-    , ("M-S-<Home>"     , shiftPrevScreen                  ) -- %! Move focused window to the previous screen
-    -- quit, or restart
-    , ("M-S-q"          , io exitSuccess                   ) -- %! Quit xmonad
-    ]
-
--- | Layouts
-myLayout = gaps $ tiled ||| threeCol ||| full
-  where
-    -- Add a configurable amount of space around windows.
-    gaps     = spacingRaw False (Border 50 50 50 50) True (Border 10 10 10 10) True
-    -- Our layouts
-    tiled    = renamed [Replace "Tiled"]        $ Tall nmaster delta ratio
-    threeCol = renamed [Replace "Three Column"] $ ThreeColMid nmaster delta ratio
-    full     = renamed [Replace "Fullscreen"]   $ Full
-    -- Layout settings
-    nmaster  = 1      -- Default number of windows in the master pane
-    ratio    = 1/2    -- Default proportion of screen occupied by master pane
-    delta    = 3/100  -- Percent of screen to increment by when resizing panes
-
--- | Xmobar
-xmobarTop    = statusBarPropTo "_XMONAD_LOG_1" "xmobar-top"    (pure ppTop)
-xmobarBottom = statusBarPropTo "_XMONAD_LOG_2" "xmobar-bottom" (pure ppBottom)
-
-ppTop :: PP
-ppTop = def
-    { ppSep             = grey0 " | "
-    , ppTitleSanitize   = xmobarStrip
-    -- workspace labels
-    , ppCurrent         = purple . wrap " " ""
-    , ppVisible         = blue   . wrap " " ""
-    , ppHidden          = grey0  . wrap " " ""
-    , ppHiddenNoWindows = grey0  . wrap " " ""
-    , ppUrgent          = red    . wrap " " ""
-    -- misc
-    , ppOrder           = \[ws, l, _, wins] -> [ws, l, wins]
-    , ppExtras          = [logTitles formatFocused formatUnfocused]
-    }
-  where
-    formatFocused   = wrap (grey0 "") (grey0 " ") . purple . ppWindow
-    formatUnfocused = wrap (grey0 "") (grey0 " ") . blue   . ppWindow
-
-    -- | Windows should have *some* title, which should not not exceed a
-    -- sane length.
-    ppWindow :: String -> String
-    ppWindow = xmobarRaw . (\w -> if null w then "untitled" else w) . shorten 30
-    
-    -- | Gruvbox material
-    bg0, bg1, fg0, fg1, red, orange, yellow, green, aqua, blue, purple :: String -> String
-    -- backgrounds
-    bg0    = xmobarColor "#1d2021" ""
-    bg1    = xmobarColor "#282828" ""
-    -- foregrounds
-    fg0    = xmobarColor "#d4be98" ""
-    fg1    = xmobarColor "#ddc7a1" ""
-    -- greys
-    grey0  = xmobarColor "#7c6f64" ""
-    -- colors
-    red    = xmobarColor "#ea6962" ""
-    orange = xmobarColor "#e78a4e" ""
-    yellow = xmobarColor "#d8a658" ""
-    green  = xmobarColor "#a9b665" ""
-    aqua   = xmobarColor "#89b482" ""
-    blue   = xmobarColor "#7daea3" ""
-    purple = xmobarColor "#d3869b" ""
-
-ppBottom :: PP
-ppBottom = def
-
--- | The main function
-main :: IO ()
-main = xmonad 
-     . ewmhFullscreen
-     . ewmh
-     . withEasySB (xmobarTop <> xmobarBottom) defToggleStrutsKey 
-     $ myConfig
-
-myConfig = def
-    { modMask            = myModMask
-    , layoutHook         = myLayout
-    , terminal           = myTerminal
-    , borderWidth        = myBorderWidth
-    , normalBorderColor  = myNormalBorderColor
-    , focusedBorderColor = myFocusedBorderColor
-    , workspaces         = myWorkspaces
-    } `additionalKeysP` myKeys
-
-

home-manager/home.nix

@@ -11,6 +11,11 @@
     # inputs.nix-colors.homeManagerModules.default
 
     # You can also split up your configuration and import pieces of it here:
+
+    # Jasmine's Desktop Environment
+    ./jade/default.nix
+
+    # Programs
     ./programs/discocss.nix
     ./programs/git.nix
     ./programs/mangohud.nix
@@ -60,11 +65,8 @@
     packages = with pkgs; [
       discord
       spotify
-      # pkgs.unstable
+      prismlauncher
-      unstable.prismlauncher
     ];
-
-    file.".xinitrc".source = ./xinitrc;
   };
 
   # Copy user configuration

home-manager/jade/default.nix

@@ -0,0 +1,20 @@
+{ inputs, outputs, lib, config, pkgs, ... }:
+
+{
+  imports = [
+    ./xmonad
+  ];
+
+  home.packages = with pkgs; [
+    dmenu
+    feh
+    wezterm
+  ];
+  
+  xdg.configFile = {
+    wezterm = { source = ./wezterm; recursive = true; };
+  };
+
+  home.file.".xinitrc".source = ./xinitrc;
+}
+

home-manager/jade/xinitrc

@@ -4,7 +4,7 @@
 xrandr --output HDMI-A-0 --mode 1920x1080 --output DisplayPort-0 --mode 2560x1440 --right-of HDMI-A-0
 
 # Apply our wallpaper
-feh --bg-scale ~/dotfiles.nix/assets/chinatown.png
+feh --bg-scale /etc/nixos/assets/chinatown.png
 
 # Launch our window manager
 exec xmonad

home-manager/jade/xmobar/xmobar-jsm/LICENSE

@@ -0,0 +1,28 @@
+BSD 3-Clause License
+
+Copyright (c) 2023, sajenim
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution.
+
+3. Neither the name of the copyright holder nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

home-manager/jade/xmobar/xmobar-jsm/README.md

@@ -0,0 +1 @@
+# xmobar-jsm

home-manager/jade/xmobar/xmobar-jsm/flake.lock

@@ -0,0 +1,80 @@
+{
+  "nodes": {
+    "flake-parts": {
+      "inputs": {
+        "nixpkgs-lib": "nixpkgs-lib"
+      },
+      "locked": {
+        "lastModified": 1680392223,
+        "narHash": "sha256-n3g7QFr85lDODKt250rkZj2IFS3i4/8HBU2yKHO3tqw=",
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "rev": "dcc36e45d054d7bb554c9cdab69093debd91a0b5",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "type": "github"
+      }
+    },
+    "haskell-flake": {
+      "locked": {
+        "lastModified": 1682714267,
+        "narHash": "sha256-DsGj9AIKqKcWQQOuwbFU77rkehaICzISHhH7aezZ6OQ=",
+        "owner": "srid",
+        "repo": "haskell-flake",
+        "rev": "a904caac3e4638f84a28102762bf767dd1ae50c0",
+        "type": "github"
+      },
+      "original": {
+        "owner": "srid",
+        "repo": "haskell-flake",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1682779028,
+        "narHash": "sha256-tFfSbwSLobpHRznAa35KEU3R+fsFWTlmpFhTUdXq8RE=",
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "54abe781c482f51ff4ff534ebaba77db5bd97442",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nixos",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs-lib": {
+      "locked": {
+        "dir": "lib",
+        "lastModified": 1680213900,
+        "narHash": "sha256-cIDr5WZIj3EkKyCgj/6j3HBH4Jj1W296z7HTcWj1aMA=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "e3652e0735fbec227f342712f180f4f21f0594f2",
+        "type": "github"
+      },
+      "original": {
+        "dir": "lib",
+        "owner": "NixOS",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-parts": "flake-parts",
+        "haskell-flake": "haskell-flake",
+        "nixpkgs": "nixpkgs"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}

home-manager/jade/xmobar/xmobar-jsm/flake.nix

@@ -0,0 +1,46 @@
+{
+  inputs = {
+    nixpkgs.url = "github:nixos/nixpkgs/nixpkgs-unstable";
+    flake-parts.url = "github:hercules-ci/flake-parts";
+    haskell-flake.url = "github:srid/haskell-flake";
+  };
+  outputs = inputs@{ self, nixpkgs, flake-parts, ... }:
+    flake-parts.lib.mkFlake { inherit inputs; } {
+      systems = nixpkgs.lib.systems.flakeExposed;
+      imports = [ inputs.haskell-flake.flakeModule ];
+
+      perSystem = { self', pkgs, ... }: {
+
+        # Typically, you just want a single project named "default". But
+        # multiple projects are also possible, each using different GHC version.
+        haskellProjects.default = {
+          # If you have a .cabal file in the root, this option is determined
+          # automatically. Otherwise, specify all your local packages here.
+          # packages.example.root = ./.;
+
+          # The base package set representing a specific GHC version.
+          # By default, this is pkgs.haskellPackages.
+          # You may also create your own. See https://haskell.flake.page/package-set
+          # basePackages = pkgs.haskellPackages;
+
+          # Dependency overrides go here. See https://haskell.flake.page/dependency
+          # source-overrides = { };
+          # overrides = self: super: { };
+
+          # devShell = {
+          #  # Enabled by default
+          #  enable = true;  
+          #
+          #  # Programs you want to make available in the shell.
+          #  # Default programs can be disabled by setting to 'null'
+          #  tools = hp: { fourmolu = hp.fourmolu; ghcid = null; };
+          #
+          #  hlsCheck.enable = true;
+          # };
+        };
+
+        # haskell-flake doesn't set the default package, but you can do it here.
+        packages.default = self'.packages.xmobar-jsm;
+      };
+    };
+}

home-manager/jade/xmobar/xmobar-jsm/src/xmobar-top.hs

@@ -0,0 +1,47 @@
+import Xmobar
+
+-- | Configuration
+config :: Config
+config = defaultConfig
+  -- general settings
+  { font            = "Fira Code Semi Bold 9"
+  , additionalFonts = [ "Symbols Nerd Font 2048-em 24" ]
+  , bgColor         = bg1
+  , fgColor         = fg0
+  , position        = Static { xpos = 1920, ypos = 0, width = 2560, height = 24 }
+  -- commands to run
+  , commands =
+      [ Run $ XPropertyLog "_XMONAD_LOG_1"
+      , Run $ Com "uname" ["-r","-s"] "" 0
+      , Run $ Date "%a %b %_d %Y <fc=#d8a657>%H:%M:%S</fc>" "date" 10
+      , Run $ Weather "YPJT"
+                      [ "-t", "Temp: <fc=#d3869b><tempC>C</fc> <fc=#7c6f64>|</fc> Wind: <fc=#a9b665><windKmh>km/h</fc> <fc=#7c6f64>|</fc> Humidity: <fc=#e78a4e><rh>%</fc>" ]
+                      18000
+      ]
+  -- format our bar
+  , sepChar  = "%"
+  , alignSep = "}{"
+  , template = "<hspace=6/><fn=1>\59255</fn>  <fc=#a9b665>%uname%</fc> <fc=#7c6f64>|</fc>%_XMONAD_LOG_1%}{%YPJT% <fc=#7c6f64>|</fc> %date%<hspace=6/>"
+  }
+
+-- | Gruvbox material
+bg0, bg1, fg0, fg1, red, orange, yellow, green, aqua, blue, purple :: String
+-- backgrounds
+bg0    = "#1d2021"
+bg1    = "#282828"
+-- foregrounds
+fg0    = "#d4be98"
+fg1    = "#ddc7a1"
+-- greys
+grey0  = "#7c6f64"
+-- colors
+red    = "#ea6962"
+orange = "#e78a4e"
+yellow = "#d8a658"
+green  = "#a9b665"
+aqua   = "#89b482"
+blue   = "#7daea3"
+purple = "#d3869b"
+
+main :: IO ()
+main = configFromArgs config >>= xmobar

home-manager/jade/xmobar/xmobar-jsm/xmobar-jsm.cabal

@@ -0,0 +1,21 @@
+cabal-version:      3.0
+name:               xmobar-jsm
+version:            0.1.0.0
+synopsis:           A Minimalistic Text Based Status Bar
+description:        my xmobar configuration
+license:            BSD-3-Clause
+license-file:       LICENSE
+author:             sajenim
+maintainer:         its.jassy@pm.me
+homepage:           https://github.com/sajenim/jade
+build-type:         Simple
+extra-source-files: README.md
+
+executable xmobar-top
+    main-is:          xmobar-top.hs
+    hs-source-dirs:   src
+    ghc-options:      -Wall -threaded
+    build-depends:    base,
+                      xmobar
+    default-language: Haskell2010
+

home-manager/jade/xmonad/default.nix

@@ -0,0 +1,10 @@
+{ inputs, outputs, lib, config, pkgs, ... }:
+
+{
+  xsession.windowManager.xmonad = {
+    enable = true;
+    enableContribAndExtras = true;
+    config = /etc/nixos/home-manager/jade/xmonad/xmonad-jsm/src/xmonad.hs;
+  };
+}
+

home-manager/jade/xmonad/xmonad-jsm

@@ -0,0 +1 @@
+Subproject commit 9b39c82ae4bb5f29fa81eaf7d6a7111653cedcf0

nixos/configuration.nix

@@ -191,6 +191,7 @@
       enable = true;
       layout = "au";
       videoDrivers = [ "amdgpu" ];
+      displayManager.startx.enable = true;
     };
   };