Adjust heights of the rj9 and teensy

README.md

@@ -21,7 +21,7 @@ I plan to try the 4x6 version or maybe the 4x5 version. The default has more ten
 
 I plan to use a Teensy 2++ in each half. Then, I have enough channels to wire straight to each key switch. Diodes are not needed. Then, I can connect them with a serial connection, and adapt the QMK firmware for the [Let's split keyboard](https://github.com/qmk/qmk_firmware/tree/master/keyboards/lets_split) that implements this approach. Each half can be master.
 
-This doesn't have a bottom. I may or may not add one. I have many test prints to try.
+This doesn't have a bottom. It has hex holes designed for 9- or 10-mm long M3 female-female spacers. Then, I can use a M3 wafer-head screws to connect a bottom plate. If wires aren't dangling, a bottom plate may not be needed.
 
 ## Assembly
 

src/dactyl_keyboard/dactyl.clj

@@ -519,22 +519,24 @@
            (translate [0 (/ mount-height 2) wall-offset])
            ))))
 
+(def rj9-vertical-offset (- (last (key-position 0 0 [0 (/ mount-height 2) 0])) 40))
 (def rj9-cube   (cube 14.78 13 22.38))
-(def rj9-space  (on-wall-place 1 20 rj9-cube))
+(def rj9-space  (on-wall-place 1 rj9-vertical-offset rj9-cube))
-(def rj9-holder (on-wall-place 1 20 
+(def rj9-holder (on-wall-place 1 rj9-vertical-offset 
                   (difference rj9-cube
                               (union (translate [0 2 0] (cube 10.78  9 18.38))
                                      (translate [0 0 5] (cube 10.78 13  5))))))
 
-(def teensy-width 20)  ; was 20
+(def teensy-width 20)  
 (def teensy-height 12)
 (def teensy-length 33)
 (def teensy2-length 53)
 (def teensy-pcb-thickness 1.6) 
 (def teensy-offset-height 5)
+(def teensy-vertical-offset )
 
 (def teensy-holder 
-    (on-wall-place 0 20 
+    (on-wall-place 0 rj9-vertical-offset
       (translate [-5 0 0] 
         (union 
           (->> (cube 3 (* 1.2 teensy2-length) (+ 6 teensy-width))
@@ -560,7 +562,7 @@
                (mirror [-1 0 0] side-cylinder))
          (rotate (/ π 2) [1 0 0])
          (rotate (/ π 2) [0 1 0])
-         (on-wall-place 0 20))))
+         (on-wall-place 0 rj9-vertical-offset))))
 
 
 (defn hex-spacer [column row radius height] 
@@ -589,7 +591,7 @@
   (union (hex-spacer 0 0         radius height)
          (hex-spacer 0 cornerrow radius height)
          (hex-spacer 3 lastrow   radius height)
-         (hex-spacer 2 0         radius height)
+         (hex-spacer 3 0         radius height)
          (hex-spacer lastcol (dec cornerrow) radius height)
          ))
 (def hex-spacer-height 10)
@@ -609,7 +611,10 @@
                    connectors
                    thumb
                    thumb-connectors
-                   (difference case-walls rj9-space usb-cutout hex-spacer-holes)
+                   (difference case-walls 
+                               rj9-space 
+                               usb-cutout 
+                               hex-spacer-holes)
                    rj9-holder
                    (if (= nrows 4) teensy-holder)
                    hex-spacer-outers 

things/right.scad

@@ -25468,7 +25468,7 @@ union () {
         }
       }
     }
-    translate ([0, 0, -20]) {
+    translate ([0, 0, -15.59400737850683]) {
       translate ([0, 0, 24]) {
         rotate (a=14.999999999999998, v=[0, 1, 0]) {
           translate ([0, 0, 0]) {
@@ -25495,7 +25495,7 @@ union () {
         }
       }
     }
-    translate ([0, 0, -20]) {
+    translate ([0, 0, -15.59400737850683]) {
       translate ([0, 0, 24]) {
         rotate (a=14.999999999999998, v=[0, 1, 0]) {
           translate ([0, 0, 0]) {
@@ -25563,9 +25563,9 @@ union () {
           }
         }
       }
-      translate ([-5.6004218299893145, 3.882285676537811, 0]) {
+      translate ([-3.882285676537811, 3.882285676537811, 0]) {
         translate ([0.0, 8.7, 0]) {
-          translate ([-20.394365071398095, 24.889141071803305, 5]) {
+          translate ([0.7519877465316838, 22.069141071803305, 5]) {
             rotate (a=0.0, v=[0, 0, 1]) {
               cylinder ($fn=6, h=10, r=2.71, center=true);
             }
@@ -25583,7 +25583,7 @@ union () {
       }
     }
   }
-  translate ([0, 0, -20]) {
+  translate ([0, 0, -15.59400737850683]) {
     translate ([0, 0, 24]) {
       rotate (a=14.999999999999998, v=[0, 1, 0]) {
         translate ([0, 0, 0]) {
@@ -25620,7 +25620,7 @@ union () {
       }
     }
   }
-  translate ([0, 0, -20]) {
+  translate ([0, 0, -15.59400737850683]) {
     translate ([0, 0, 24]) {
       rotate (a=14.999999999999998, v=[0, 1, 0]) {
         translate ([0, 0, 0]) {
@@ -25693,9 +25693,9 @@ union () {
         }
       }
     }
-    translate ([-5.6004218299893145, 3.882285676537811, 0]) {
+    translate ([-3.882285676537811, 3.882285676537811, 0]) {
       translate ([0.0, 8.7, 0]) {
-        translate ([-20.394365071398095, 24.889141071803305, 5.8]) {
+        translate ([0.7519877465316838, 22.069141071803305, 5.8]) {
           rotate (a=0.0, v=[0, 0, 1]) {
             cylinder ($fn=6, h=11.6, r=4.3100000000000005, center=true);
           }