Route 2 upgraded

This commit is contained in:
BubblesToTheLimit 2016-09-10 22:38:06 +02:00
parent a16e3c92aa
commit 9370c43dfe
5 changed files with 3645 additions and 1 deletions

View file

@ -93,6 +93,8 @@
- Here too firmware and wiring go hand in hand, you pretty much have to have a detailed look - Here too firmware and wiring go hand in hand, you pretty much have to have a detailed look
at the firmware you are using before wiring anything. I provide my modification of the at the firmware you are using before wiring anything. I provide my modification of the
"ergodox-firmware" over here: https://github.com/BubblesToTheLimit/ergodox-firmware "ergodox-firmware" over here: https://github.com/BubblesToTheLimit/ergodox-firmware
- TODO: Make a successfull pull-request, such that it is available in the official
ergodox-firmware
- Some of the steps of this guide may not be described in much detail, but in contrast to - Some of the steps of this guide may not be described in much detail, but in contrast to
option one there is a whole lot more of information. option one there is a whole lot more of information.
- [[Route 2: Dactyl Hand-Wiring Guide]] - [[Route 2: Dactyl Hand-Wiring Guide]]
@ -171,6 +173,58 @@
[[file:wiring-create-rows-both-sides.jpg]] [[file:wiring-create-rows-both-sides.jpg]]
Because this was my first soldering job i went ahead and tested each one of the 70 switches. You might want to go ahead and test each one of the 70 switches with a multimeter.
[[file:wiring-create-rows-testing.jpg]] [[file:wiring-create-rows-testing.jpg]]
The next step is to create the columns by soldering the diodes. Notice which way these diodes
are directed here, the way these diodes are directed, we have to have a firmware that "drives
the rows". (TODO: insert diagram here) Luckily in our firmware "ergodox-firmware" we have the
option that adapts to that. However if you want to try and use the "tmk_keyboard" firmware
which seems to be also interesting you want to wire the diodes the other way. This way the
"columns are driving". As a side note, for some reason the tmk_keyboard firmware things of rows
as columns and the other way around, so if you look through the source code it will also see
"drive rows", even though that means "driving columns".
The tmk_keyboard firmware could also be used for this kind of wiring, but it would have to be
rewritten, maybe in a beautiful way, such that it can also "drive rows". However I didnt go
ahead and perfomed that rewriting, so I had to stick with the "ergodox-firmware". In retrospect
I'd wish I had wired the diodes the other way around.
The first picture doesnt show how the 6 thumb-keys are actually individually connected to the 6
main columns.
[[file:wiring-create-columns-left.jpg]]
This second picture shows how the 6 thumb-keys are actually connected to the 6 main columns.
[[file:wiring-create-columns-right.jpg]]
TODO: Insert diagram of how the thumb-keys are connected to the main clumns.
The next step is to wire the Teensy 2.0 and the MCP 23018 in place.
Everything necessary for that really is the following circuit diagram
[[file:circuit-diagram.svg]]
[[file:rows-and-columns-connected-to-chips.jpg]]
Things to note here:
- The columns for the MCP go from 0 to 6, the columns for the Teensy go from 7 to D (counting
in hexadecimal) which makes great sence, since the MCP is left to the Teensy and we read from
left to right.
- When debugging this and using the ergodox-firmware, both sides have to be wired completely
and actually connected, dont expect the keyboard to work before that. The reason being is how
the ergodox-firmware stops completely if either the Teensy or the MCP weren't initiated
properly.
- In the circuit-diagram the columns on the left side (MCP side) actually go from GPA5 to INTA
(TODO: Update the circuit diagram and get rid of this point)
- The LEDs are handy for debugging, definately go ahead and connect those. When the keyboard
starts successfully two of the LEDs light up shortly.
- From the Teensy over to the MCP go exactly 4 connections. The blue, the red and the two green
ones. This is done using the TTRS jacks and cable (TODO: Add picture here how the jacks are
wired)
- Yes, the connection from B4 to VCC doesnt seem to make any sense, but the B4 port actually
gets used directly in the ergodox-firmware, so just connect those connections that make no
sense on first sight and either dont question it or find out why this is necessary by going
through the firmware in great detail.

3590
guide/circuit-diagram.svg Normal file

File diff suppressed because it is too large Load diff

After

Width:  |  Height:  |  Size: 158 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 2.2 MiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 1.7 MiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 2.1 MiB