Add ready to cut dxf for 5x6, and new wire diagrams (#10)

* Add ready to cut dxf file for 5x6

Signed-off-by: Marian Rusu <rusumarian91@gmail.com>

* Add new wire diagram

Hopefully people find it helpful

Signed-off-by: Marian Rusu <rusumarian91@gmail.com>
This commit is contained in:
Marian Rusu 2017-11-06 02:56:46 +00:00 committed by Tom Short
parent a97ca9beeb
commit 7b26338842
4 changed files with 2812 additions and 0 deletions

View file

@ -110,6 +110,16 @@ For more photos of the first complete wiring of v0.4, see [Imgur](http://imgur.c
This is how the rows/columns wire to the keys and the ProMicro
![Wire Diagram](https://docs.google.com/drawings/d/1s9aAg5bXBrhtb6Xw-sGOQQEndRNOqpBRyUyHkgpnSps/pub?w=1176&h=621)
#### Alternative row-driven wiring diagram for ProMicro:
NOTE: you also make sure the firmware is set up correctly (ex: change row pins with col pins)
![Left Wire Diagram](/resources/dactyl_manuform_left_wire_diagram.png)
![Left Wire Diagram](/resources/dactyl_manuform_right_wire_diagram.png)
### Firmware
Firmware goes hand in hand with how you wire the circuit.

Binary file not shown.

After

Width:  |  Height:  |  Size: 8.6 MiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 1 MiB

File diff suppressed because it is too large Load diff