25 lines
1.2 KiB
JSON
25 lines
1.2 KiB
JSON
{
|
|
"deretraction_speed": [
|
|
"35"
|
|
],
|
|
"from": "User",
|
|
"inherits": "Creality Ender-3 V3 SE 0.4 nozzle",
|
|
"is_custom_defined": "0",
|
|
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \nM413 S0;Disables power loss recovery\n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nM420 S1 ;Enable mesh leveling\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
|
|
"name": "Jensen 0.4 nozzle",
|
|
"printer_settings_id": "Jensen 0.4 nozzle",
|
|
"retraction_length": [
|
|
"0.8"
|
|
],
|
|
"retraction_speed": [
|
|
"35"
|
|
],
|
|
"version": "2.2.0.4",
|
|
"wipe": [
|
|
"0"
|
|
],
|
|
"z_hop": [
|
|
"0.2"
|
|
]
|
|
}
|