{
    "bottom_shell_layers": "3",
    "bottom_solid_infill_flow_ratio": "1.05",
    "bottom_surface_pattern": "monotonicline",
    "bridge_flow": "1",
    "bridge_speed": "60",
    "detect_thin_wall": "0",
    "enable_overhang_speed": "0",
    "from": "User",
    "gap_infill_speed": "15",
    "inherits": "0.20mm Standard @Creality Ender3V3SE 0.4",
    "initial_layer_infill_speed": "30",
    "initial_layer_line_width": "120%",
    "initial_layer_print_height": "0.28",
    "initial_layer_speed": "15",
    "inner_wall_acceleration": "1000",
    "inner_wall_line_width": "110%",
    "inner_wall_speed": "60",
    "internal_bridge_speed": "80",
    "internal_solid_infill_line_width": "120%",
    "internal_solid_infill_pattern": "monotonicline",
    "internal_solid_infill_speed": "100",
    "is_custom_defined": "0",
    "line_width": "110%",
    "max_volumetric_extrusion_rate_slope": "15",
    "minimum_sparse_infill_area": "15",
    "name": "0.20mm Standard @TzKal-Zuk",
    "only_one_wall_first_layer": "1",
    "only_one_wall_top": "1",
    "outer_wall_acceleration": "500",
    "outer_wall_line_width": "100%",
    "outer_wall_speed": "40",
    "precise_outer_wall": "1",
    "print_settings_id": "0.20mm Standard @TzKal-Zuk",
    "skirt_loops": "1",
    "small_perimeter_speed": "15",
    "sparse_infill_acceleration": "200%",
    "sparse_infill_density": "40%",
    "sparse_infill_line_width": "160%",
    "sparse_infill_pattern": "gyroid",
    "sparse_infill_speed": "150",
    "support_line_width": "96%",
    "support_speed": "60",
    "top_surface_acceleration": "1000",
    "top_surface_line_width": "100%",
    "top_surface_speed": "30",
    "travel_acceleration": "3500",
    "version": "2.2.0.4",
    "wall_generator": "classic",
    "wall_loops": "3"
}