From 84ab594b19918d3edff7da0171e7e049f3d89cd2 Mon Sep 17 00:00:00 2001 From: jasmine Date: Wed, 11 Dec 2024 10:42:48 +0800 Subject: [PATCH] update profiles --- ...UN PETG.info => eSUN PETG 0.4 nozzle.info} | 0 ...UN PETG.json => eSUN PETG 0.4 nozzle.json} | 13 ++-- filament/eSUN PETG 0.6 nozzle.info | 5 ++ filament/eSUN PETG 0.6 nozzle.json | 52 ++++++++++++++ ...UN PLA+.info => eSUN PLA+ 0.4 nozzle.info} | 0 ...UN PLA+.json => eSUN PLA+ 0.4 nozzle.json} | 24 ++++--- filament/eSUN PLA+ 0.6 nozzle.info | 5 ++ filament/eSUN PLA+ 0.6 nozzle.json | 58 ++++++++++++++++ ...lity Ender-3 V3 SE 0.4 nozzle @Helwyr.info | 5 ++ ...lity Ender-3 V3 SE 0.4 nozzle @Helwyr.json | 18 +++++ machine/Croesus 0.4 nozzle.json | 4 +- machine/Croesus 0.6 nozzle.info | 5 ++ machine/Croesus 0.6 nozzle.json | 67 +++++++++++++++++++ process/0.08mm Extra Fine @Croesus.json | 22 +++--- process/0.12mm Fine @Croesus.json | 22 +++--- process/0.16mm Optimal @Croesus.json | 17 +++-- process/0.20mm Standard @Croesus.json | 22 +++--- process/0.20mm Standard @Helwyr.info | 5 ++ process/0.20mm Standard @Helwyr.json | 39 +++++++++++ process/0.24mm Draft @Croesus.json | 22 +++--- process/0.28mm Extra Draft @Croesus.json | 22 +++--- process/0.32mm Standard @Croesus.info | 5 ++ process/0.32mm Standard @Croesus.json | 41 ++++++++++++ 23 files changed, 381 insertions(+), 92 deletions(-) rename filament/{eSUN PETG.info => eSUN PETG 0.4 nozzle.info} (100%) rename filament/{eSUN PETG.json => eSUN PETG 0.4 nozzle.json} (86%) create mode 100644 filament/eSUN PETG 0.6 nozzle.info create mode 100644 filament/eSUN PETG 0.6 nozzle.json rename filament/{eSUN PLA+.info => eSUN PLA+ 0.4 nozzle.info} (100%) rename filament/{eSUN PLA+.json => eSUN PLA+ 0.4 nozzle.json} (69%) create mode 100644 filament/eSUN PLA+ 0.6 nozzle.info create mode 100644 filament/eSUN PLA+ 0.6 nozzle.json create mode 100644 machine/Creality Ender-3 V3 SE 0.4 nozzle @Helwyr.info create mode 100644 machine/Creality Ender-3 V3 SE 0.4 nozzle @Helwyr.json create mode 100644 machine/Croesus 0.6 nozzle.info create mode 100644 machine/Croesus 0.6 nozzle.json create mode 100644 process/0.20mm Standard @Helwyr.info create mode 100644 process/0.20mm Standard @Helwyr.json create mode 100644 process/0.32mm Standard @Croesus.info create mode 100644 process/0.32mm Standard @Croesus.json diff --git a/filament/eSUN PETG.info b/filament/eSUN PETG 0.4 nozzle.info similarity index 100% rename from filament/eSUN PETG.info rename to filament/eSUN PETG 0.4 nozzle.info diff --git a/filament/eSUN PETG.json b/filament/eSUN PETG 0.4 nozzle.json similarity index 86% rename from filament/eSUN PETG.json rename to filament/eSUN PETG 0.4 nozzle.json index 4b7bec6..e946c73 100644 --- a/filament/eSUN PETG.json +++ b/filament/eSUN PETG 0.4 nozzle.json @@ -5,6 +5,9 @@ "cool_plate_temp_initial_layer": [ "0" ], + "dont_slow_down_outer_wall": [ + "1" + ], "enable_pressure_advance": [ "1" ], @@ -15,21 +18,15 @@ "12" ], "filament_settings_id": [ - "eSUN PETG" + "eSUN PETG 0.4 nozzle" ], "filament_vendor": [ "eSUN" ], "from": "User", - "hot_plate_temp": [ - "0" - ], - "hot_plate_temp_initial_layer": [ - "0" - ], "inherits": "My Generic PETG", "is_custom_defined": "0", - "name": "eSUN PETG", + "name": "eSUN PETG 0.4 nozzle", "nozzle_temperature": [ "245" ], diff --git a/filament/eSUN PETG 0.6 nozzle.info b/filament/eSUN PETG 0.6 nozzle.info new file mode 100644 index 0000000..7e78923 --- /dev/null +++ b/filament/eSUN PETG 0.6 nozzle.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GFSA04 +updated_time = 1732229621 diff --git a/filament/eSUN PETG 0.6 nozzle.json b/filament/eSUN PETG 0.6 nozzle.json new file mode 100644 index 0000000..f50468f --- /dev/null +++ b/filament/eSUN PETG 0.6 nozzle.json @@ -0,0 +1,52 @@ +{ + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "dont_slow_down_outer_wall": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "eSUN PETG 0.6 nozzle" + ], + "filament_vendor": [ + "eSUN" + ], + "from": "User", + "inherits": "My Generic PETG", + "is_custom_defined": "0", + "name": "eSUN PETG 0.6 nozzle", + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "pressure_advance": [ + "0.062" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "version": "2.2.0.4" +} diff --git a/filament/eSUN PLA+.info b/filament/eSUN PLA+ 0.4 nozzle.info similarity index 100% rename from filament/eSUN PLA+.info rename to filament/eSUN PLA+ 0.4 nozzle.info diff --git a/filament/eSUN PLA+.json b/filament/eSUN PLA+ 0.4 nozzle.json similarity index 69% rename from filament/eSUN PLA+.json rename to filament/eSUN PLA+ 0.4 nozzle.json index 83db4b0..39bcc90 100644 --- a/filament/eSUN PLA+.json +++ b/filament/eSUN PLA+ 0.4 nozzle.json @@ -5,6 +5,9 @@ "cool_plate_temp_initial_layer": [ "0" ], + "dont_slow_down_outer_wall": [ + "1" + ], "enable_pressure_advance": [ "1" ], @@ -18,13 +21,13 @@ "25.95" ], "filament_flow_ratio": [ - "0.975" + "0.97" ], "filament_max_volumetric_speed": [ - "20" + "28" ], "filament_settings_id": [ - "eSUN PLA+" + "eSUN PLA+ 0.4 nozzle" ], "filament_type": [ "PLA+" @@ -35,18 +38,21 @@ "from": "User", "inherits": "My Generic PLA", "is_custom_defined": "0", - "name": "eSUN PLA+", + "name": "eSUN PLA+ 0.4 nozzle", "nozzle_temperature_range_low": [ "210" ], "pressure_advance": [ - "0.038" + "0.029" ], - "textured_plate_temp": [ - "65" + "slow_down_layer_time": [ + "15" ], - "textured_plate_temp_initial_layer": [ - "65" + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" ], "version": "2.1.1.0" } diff --git a/filament/eSUN PLA+ 0.6 nozzle.info b/filament/eSUN PLA+ 0.6 nozzle.info new file mode 100644 index 0000000..18d3c0c --- /dev/null +++ b/filament/eSUN PLA+ 0.6 nozzle.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GFSA04 +updated_time = 1731934525 diff --git a/filament/eSUN PLA+ 0.6 nozzle.json b/filament/eSUN PLA+ 0.6 nozzle.json new file mode 100644 index 0000000..a5a8d82 --- /dev/null +++ b/filament/eSUN PLA+ 0.6 nozzle.json @@ -0,0 +1,58 @@ +{ + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "dont_slow_down_outer_wall": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "filament_cost": [ + "25.95" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "32" + ], + "filament_settings_id": [ + "eSUN PLA+ 0.6 nozzle" + ], + "filament_type": [ + "PLA+" + ], + "filament_vendor": [ + "eSUN" + ], + "from": "User", + "inherits": "My Generic PLA", + "is_custom_defined": "0", + "name": "eSUN PLA+ 0.6 nozzle", + "nozzle_temperature_range_low": [ + "210" + ], + "pressure_advance": [ + "0.022" + ], + "slow_down_layer_time": [ + "15" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "version": "2.1.1.0" +} diff --git a/machine/Creality Ender-3 V3 SE 0.4 nozzle @Helwyr.info b/machine/Creality Ender-3 V3 SE 0.4 nozzle @Helwyr.info new file mode 100644 index 0000000..d7d3a85 --- /dev/null +++ b/machine/Creality Ender-3 V3 SE 0.4 nozzle @Helwyr.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GM001 +updated_time = 1733829725 diff --git a/machine/Creality Ender-3 V3 SE 0.4 nozzle @Helwyr.json b/machine/Creality Ender-3 V3 SE 0.4 nozzle @Helwyr.json new file mode 100644 index 0000000..56c1089 --- /dev/null +++ b/machine/Creality Ender-3 V3 SE 0.4 nozzle @Helwyr.json @@ -0,0 +1,18 @@ +{ + "deretraction_speed": [ + "35" + ], + "from": "User", + "inherits": "Creality Ender-3 V3 SE 0.4 nozzle", + "is_custom_defined": "0", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \nM413 S0;Disables power loss recovery\n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nM420 S1 ;Enable mesh leveling\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "name": "Creality Ender-3 V3 SE 0.4 nozzle @Helwyr", + "printer_settings_id": "Creality Ender-3 V3 SE 0.4 nozzle @Helwyr", + "retraction_length": [ + "0.8" + ], + "retraction_speed": [ + "35" + ], + "version": "2.2.0.4" +} diff --git a/machine/Croesus 0.4 nozzle.json b/machine/Croesus 0.4 nozzle.json index 4d8c29f..0df574a 100644 --- a/machine/Croesus 0.4 nozzle.json +++ b/machine/Croesus 0.4 nozzle.json @@ -1,4 +1,5 @@ { + "change_filament_gcode": "M600", "deretraction_speed": [ "35" ], @@ -36,7 +37,9 @@ "200" ], "machine_start_gcode": "M104 S0 ; Stops OrcaSlicer from sending temp waits separately\nM140 S0\nprint_start EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature]", + "manual_filament_change": "1", "name": "Croesus 0.4 nozzle", + "nozzle_type": "hardened_steel", "printable_area": [ "0x0", "230x0", @@ -51,7 +54,6 @@ "retraction_speed": [ "35" ], - "support_multi_bed_types": "1", "version": "2.1.1.0", "z_hop": [ "0.2" diff --git a/machine/Croesus 0.6 nozzle.info b/machine/Croesus 0.6 nozzle.info new file mode 100644 index 0000000..6547298 --- /dev/null +++ b/machine/Croesus 0.6 nozzle.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GM003 +updated_time = 1733377849 diff --git a/machine/Croesus 0.6 nozzle.json b/machine/Croesus 0.6 nozzle.json new file mode 100644 index 0000000..ce21041 --- /dev/null +++ b/machine/Croesus 0.6 nozzle.json @@ -0,0 +1,67 @@ +{ + "change_filament_gcode": "M600", + "deretraction_speed": [ + "35" + ], + "emit_machine_limits_to_gcode": "0", + "from": "User", + "inherits": "MyKlipper 0.6 nozzle", + "is_custom_defined": "0", + "machine_end_gcode": "print_end", + "machine_max_acceleration_x": [ + "10000", + "20000" + ], + "machine_max_acceleration_y": [ + "10000", + "20000" + ], + "machine_max_acceleration_z": [ + "100", + "200" + ], + "machine_max_jerk_x": [ + "5", + "9" + ], + "machine_max_jerk_y": [ + "5", + "9" + ], + "machine_max_speed_x": [ + "450", + "200" + ], + "machine_max_speed_y": [ + "450", + "200" + ], + "machine_start_gcode": "M104 S0 ; Stops OrcaSlicer from sending temp waits separately\nM140 S0\nprint_start EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature]", + "manual_filament_change": "1", + "max_layer_height": [ + "0.48" + ], + "min_layer_height": [ + "0.16" + ], + "name": "Croesus 0.6 nozzle", + "nozzle_type": "hardened_steel", + "printable_area": [ + "0x0", + "230x0", + "230x210", + "0x210" + ], + "printable_height": "260", + "printer_settings_id": "Croesus 0.6 nozzle", + "retraction_length": [ + "0.5" + ], + "retraction_speed": [ + "35" + ], + "version": "2.2.0.4", + "z_hop": [ + "0.2" + ] +} diff --git a/process/0.08mm Extra Fine @Croesus.json b/process/0.08mm Extra Fine @Croesus.json index eae4fee..281a85c 100644 --- a/process/0.08mm Extra Fine @Croesus.json +++ b/process/0.08mm Extra Fine @Croesus.json @@ -1,20 +1,18 @@ { - "bridge_acceleration": "500", + "bottom_surface_pattern": "monotonicline", "brim_type": "no_brim", - "default_acceleration": "4000", "filename_format": "{input_filename_base}.gcode", "from": "User", "fuzzy_skin_point_distance": "0.08", "fuzzy_skin_thickness": "0.08", "gap_infill_speed": "30", + "infill_wall_overlap": "15%", "inherits": "0.08mm Extra Fine @MyKlipper", - "initial_layer_acceleration": "2000", "initial_layer_infill_speed": "60", - "initial_layer_print_height": "0.24", + "initial_layer_print_height": "0.28", "initial_layer_speed": "30", - "inner_wall_acceleration": "2000", - "inner_wall_speed": "150", - "internal_solid_infill_acceleration": "5000", + "inner_wall_speed": "140", + "internal_solid_infill_pattern": "monotonicline", "ironing_flow": "35%", "ironing_spacing": "0.2", "ironing_speed": "180", @@ -22,24 +20,22 @@ "name": "0.08mm Extra Fine @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_acceleration": "1000", - "outer_wall_speed": "80", + "outer_wall_speed": "140", "precise_outer_wall": "1", "print_settings_id": "0.08mm Extra Fine @Croesus", "skirt_height": "2", "skirt_loops": "1", "skirt_speed": "0", "small_perimeter_speed": "30", - "sparse_infill_acceleration": "7000", + "sparse_infill_acceleration": "200%", "sparse_infill_density": "40%", "sparse_infill_line_width": "160%", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "300", "support_speed": "120", - "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", - "travel_acceleration": "10000", "travel_speed": "450", - "version": "2.1.1.0" + "version": "2.1.1.0", + "wall_generator": "classic" } diff --git a/process/0.12mm Fine @Croesus.json b/process/0.12mm Fine @Croesus.json index 9b9ac84..392547f 100644 --- a/process/0.12mm Fine @Croesus.json +++ b/process/0.12mm Fine @Croesus.json @@ -1,20 +1,18 @@ { - "bridge_acceleration": "500", + "bottom_surface_pattern": "monotonicline", "brim_type": "no_brim", - "default_acceleration": "4000", "filename_format": "{input_filename_base}.gcode", "from": "User", "fuzzy_skin_point_distance": "0.12", "fuzzy_skin_thickness": "0.12", "gap_infill_speed": "30", + "infill_wall_overlap": "15%", "inherits": "0.12mm Fine @MyKlipper", - "initial_layer_acceleration": "2000", "initial_layer_infill_speed": "60", - "initial_layer_print_height": "0.24", + "initial_layer_print_height": "0.28", "initial_layer_speed": "30", - "inner_wall_acceleration": "2000", - "inner_wall_speed": "150", - "internal_solid_infill_acceleration": "5000", + "inner_wall_speed": "140", + "internal_solid_infill_pattern": "monotonicline", "ironing_flow": "35%", "ironing_spacing": "0.2", "ironing_speed": "180", @@ -22,24 +20,22 @@ "name": "0.12mm Fine @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_acceleration": "1000", - "outer_wall_speed": "80", + "outer_wall_speed": "140", "precise_outer_wall": "1", "print_settings_id": "0.12mm Fine @Croesus", "skirt_height": "2", "skirt_loops": "1", "skirt_speed": "0", "small_perimeter_speed": "30", - "sparse_infill_acceleration": "7000", + "sparse_infill_acceleration": "200%", "sparse_infill_density": "40%", "sparse_infill_line_width": "160%", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "300", "support_speed": "120", - "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", - "travel_acceleration": "10000", "travel_speed": "450", - "version": "2.1.1.0" + "version": "2.1.1.0", + "wall_generator": "classic" } diff --git a/process/0.16mm Optimal @Croesus.json b/process/0.16mm Optimal @Croesus.json index f07df80..9e20075 100644 --- a/process/0.16mm Optimal @Croesus.json +++ b/process/0.16mm Optimal @Croesus.json @@ -1,20 +1,19 @@ { - "bridge_acceleration": "500", + "bottom_surface_pattern": "monotonicline", "brim_type": "no_brim", - "default_acceleration": "4000", "filename_format": "{input_filename_base}.gcode", "from": "User", "fuzzy_skin_point_distance": "0.16", "fuzzy_skin_thickness": "0.16", "gap_infill_speed": "30", + "infill_wall_overlap": "15%", "inherits": "0.16mm Optimal @MyKlipper", - "initial_layer_acceleration": "2000", "initial_layer_infill_speed": "60", - "initial_layer_print_height": "0.24", + "initial_layer_print_height": "0.28", "initial_layer_speed": "30", "inner_wall_acceleration": "2000", - "inner_wall_speed": "150", - "internal_solid_infill_acceleration": "5000", + "inner_wall_speed": "120", + "internal_solid_infill_pattern": "monotonicline", "ironing_flow": "35%", "ironing_spacing": "0.2", "ironing_speed": "180", @@ -30,7 +29,7 @@ "skirt_loops": "1", "skirt_speed": "0", "small_perimeter_speed": "30", - "sparse_infill_acceleration": "7000", + "sparse_infill_acceleration": "200%", "sparse_infill_density": "40%", "sparse_infill_line_width": "160%", "sparse_infill_pattern": "gyroid", @@ -39,7 +38,7 @@ "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", - "travel_acceleration": "10000", "travel_speed": "450", - "version": "2.1.1.0" + "version": "2.1.1.0", + "wall_generator": "classic" } diff --git a/process/0.20mm Standard @Croesus.json b/process/0.20mm Standard @Croesus.json index 7df14ac..9b50841 100644 --- a/process/0.20mm Standard @Croesus.json +++ b/process/0.20mm Standard @Croesus.json @@ -1,20 +1,18 @@ { - "bridge_acceleration": "500", + "bottom_surface_pattern": "monotonicline", "brim_type": "no_brim", - "default_acceleration": "4000", "filename_format": "{input_filename_base}.gcode", "from": "User", "fuzzy_skin_point_distance": "0.2", "fuzzy_skin_thickness": "0.2", "gap_infill_speed": "30", + "infill_wall_overlap": "15%", "inherits": "0.20mm Standard @MyKlipper", - "initial_layer_acceleration": "2000", "initial_layer_infill_speed": "60", - "initial_layer_print_height": "0.24", + "initial_layer_print_height": "0.28", "initial_layer_speed": "30", - "inner_wall_acceleration": "2000", - "inner_wall_speed": "150", - "internal_solid_infill_acceleration": "5000", + "inner_wall_speed": "140", + "internal_solid_infill_pattern": "monotonicline", "ironing_flow": "35%", "ironing_spacing": "0.2", "ironing_speed": "180", @@ -22,24 +20,22 @@ "name": "0.20mm Standard @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_acceleration": "1000", - "outer_wall_speed": "80", + "outer_wall_speed": "140", "precise_outer_wall": "1", "print_settings_id": "0.20mm Standard @Croesus", "skirt_height": "2", "skirt_loops": "1", "skirt_speed": "0", "small_perimeter_speed": "30", - "sparse_infill_acceleration": "7000", + "sparse_infill_acceleration": "200%", "sparse_infill_density": "40%", "sparse_infill_line_width": "160%", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "300", "support_speed": "120", - "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", - "travel_acceleration": "10000", "travel_speed": "450", - "version": "2.1.1.0" + "version": "2.1.1.0", + "wall_generator": "classic" } diff --git a/process/0.20mm Standard @Helwyr.info b/process/0.20mm Standard @Helwyr.info new file mode 100644 index 0000000..fe5d222 --- /dev/null +++ b/process/0.20mm Standard @Helwyr.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 0 diff --git a/process/0.20mm Standard @Helwyr.json b/process/0.20mm Standard @Helwyr.json new file mode 100644 index 0000000..0b5fff8 --- /dev/null +++ b/process/0.20mm Standard @Helwyr.json @@ -0,0 +1,39 @@ +{ + "bottom_shell_layers": "3", + "bottom_surface_pattern": "monotonicline", + "bridge_flow": "1", + "detect_thin_wall": "0", + "from": "User", + "gap_infill_speed": "20", + "inherits": "0.20mm Standard @Creality Ender3V3SE 0.4", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "120%", + "initial_layer_print_height": "0.28", + "inner_wall_line_width": "110%", + "inner_wall_speed": "80", + "internal_solid_infill_line_width": "120%", + "internal_solid_infill_pattern": "monotonicline", + "internal_solid_infill_speed": "120", + "is_custom_defined": "0", + "line_width": "110%", + "minimum_sparse_infill_area": "15", + "name": "0.20mm Standard @Helwyr", + "only_one_wall_first_layer": "1", + "only_one_wall_top": "1", + "outer_wall_line_width": "100%", + "precise_outer_wall": "1", + "print_settings_id": "0.20mm Standard @Helwyr", + "skirt_loops": "1", + "small_perimeter_speed": "20", + "sparse_infill_density": "40%", + "sparse_infill_line_width": "160%", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "120", + "support_line_width": "96%", + "support_speed": "120", + "top_surface_line_width": "100%", + "top_surface_speed": "40", + "version": "2.2.0.4", + "wall_generator": "classic", + "wall_loops": "3" +} diff --git a/process/0.24mm Draft @Croesus.json b/process/0.24mm Draft @Croesus.json index 97195c4..f3f4e45 100644 --- a/process/0.24mm Draft @Croesus.json +++ b/process/0.24mm Draft @Croesus.json @@ -1,20 +1,18 @@ { - "bridge_acceleration": "500", + "bottom_surface_pattern": "monotonicline", "brim_type": "no_brim", - "default_acceleration": "4000", "filename_format": "{input_filename_base}.gcode", "from": "User", "fuzzy_skin_point_distance": "0.24", "fuzzy_skin_thickness": "0.24", "gap_infill_speed": "30", + "infill_wall_overlap": "15%", "inherits": "0.24mm Draft @MyKlipper", - "initial_layer_acceleration": "2000", "initial_layer_infill_speed": "60", - "initial_layer_print_height": "0.24", + "initial_layer_print_height": "0.28", "initial_layer_speed": "30", - "inner_wall_acceleration": "2000", - "inner_wall_speed": "150", - "internal_solid_infill_acceleration": "5000", + "inner_wall_speed": "140", + "internal_solid_infill_pattern": "monotonicline", "ironing_flow": "35%", "ironing_spacing": "0.2", "ironing_speed": "180", @@ -22,24 +20,22 @@ "name": "0.24mm Draft @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_acceleration": "1000", - "outer_wall_speed": "80", + "outer_wall_speed": "140", "precise_outer_wall": "1", "print_settings_id": "0.24mm Draft @Croesus", "skirt_height": "2", "skirt_loops": "1", "skirt_speed": "0", "small_perimeter_speed": "30", - "sparse_infill_acceleration": "7000", + "sparse_infill_acceleration": "200%", "sparse_infill_density": "40%", "sparse_infill_line_width": "160%", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "300", "support_speed": "120", - "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", - "travel_acceleration": "10000", "travel_speed": "450", - "version": "2.1.1.0" + "version": "2.1.1.0", + "wall_generator": "classic" } diff --git a/process/0.28mm Extra Draft @Croesus.json b/process/0.28mm Extra Draft @Croesus.json index dd4f2dd..dd92eab 100644 --- a/process/0.28mm Extra Draft @Croesus.json +++ b/process/0.28mm Extra Draft @Croesus.json @@ -1,20 +1,18 @@ { - "bridge_acceleration": "500", + "bottom_surface_pattern": "monotonicline", "brim_type": "no_brim", - "default_acceleration": "4000", "filename_format": "{input_filename_base}.gcode", "from": "User", "fuzzy_skin_point_distance": "0.28", "fuzzy_skin_thickness": "0.28", "gap_infill_speed": "30", + "infill_wall_overlap": "15%", "inherits": "0.28mm Extra Draft @MyKlipper", - "initial_layer_acceleration": "2000", "initial_layer_infill_speed": "60", - "initial_layer_print_height": "0.24", + "initial_layer_print_height": "0.28", "initial_layer_speed": "30", - "inner_wall_acceleration": "2000", - "inner_wall_speed": "150", - "internal_solid_infill_acceleration": "5000", + "inner_wall_speed": "140", + "internal_solid_infill_pattern": "monotonicline", "ironing_flow": "35%", "ironing_spacing": "0.2", "ironing_speed": "180", @@ -22,24 +20,22 @@ "name": "0.28mm Extra Draft @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_acceleration": "1000", - "outer_wall_speed": "80", + "outer_wall_speed": "140", "precise_outer_wall": "1", "print_settings_id": "0.28mm Extra Draft @Croesus", "skirt_height": "2", "skirt_loops": "1", "skirt_speed": "0", "small_perimeter_speed": "30", - "sparse_infill_acceleration": "7000", + "sparse_infill_acceleration": "200%", "sparse_infill_density": "40%", "sparse_infill_line_width": "160%", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "300", "support_speed": "120", - "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", - "travel_acceleration": "10000", "travel_speed": "450", - "version": "2.1.1.0" + "version": "2.1.1.0", + "wall_generator": "classic" } diff --git a/process/0.32mm Standard @Croesus.info b/process/0.32mm Standard @Croesus.info new file mode 100644 index 0000000..b63f570 --- /dev/null +++ b/process/0.32mm Standard @Croesus.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 1733533149 diff --git a/process/0.32mm Standard @Croesus.json b/process/0.32mm Standard @Croesus.json new file mode 100644 index 0000000..e08db06 --- /dev/null +++ b/process/0.32mm Standard @Croesus.json @@ -0,0 +1,41 @@ +{ + "bottom_surface_pattern": "monotonicline", + "brim_type": "no_brim", + "filename_format": "{input_filename_base}.gcode", + "from": "User", + "fuzzy_skin_point_distance": "0.28", + "fuzzy_skin_thickness": "0.28", + "gap_infill_speed": "30", + "infill_wall_overlap": "15%", + "inherits": "0.32mm Standard @MyKlipper", + "initial_layer_infill_speed": "60", + "initial_layer_print_height": "0.28", + "initial_layer_speed": "30", + "inner_wall_speed": "140", + "internal_solid_infill_pattern": "monotonicline", + "ironing_flow": "35%", + "ironing_spacing": "0.2", + "ironing_speed": "180", + "is_custom_defined": "0", + "name": "0.32mm Standard @Croesus", + "only_one_wall_first_layer": "1", + "only_one_wall_top": "1", + "outer_wall_speed": "140", + "precise_outer_wall": "1", + "print_settings_id": "0.32mm Standard @Croesus", + "skirt_height": "2", + "skirt_loops": "1", + "skirt_speed": "0", + "small_perimeter_speed": "30", + "sparse_infill_acceleration": "200%", + "sparse_infill_density": "40%", + "sparse_infill_line_width": "160%", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "300", + "support_speed": "120", + "top_surface_line_width": "100%", + "top_surface_speed": "60", + "travel_speed": "450", + "version": "2.2.0.4", + "wall_generator": "classic" +}