commit 6fb27b898cd4f89ba3116cc5f2f1830ef10a2c95 Author: jasmine Date: Tue Nov 19 13:50:53 2024 +0800 initial commit diff --git a/filament/eSUN PLA+.info b/filament/eSUN PLA+.info new file mode 100644 index 0000000..18d3c0c --- /dev/null +++ b/filament/eSUN PLA+.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GFSA04 +updated_time = 1731934525 diff --git a/filament/eSUN PLA+.json b/filament/eSUN PLA+.json new file mode 100644 index 0000000..85385ca --- /dev/null +++ b/filament/eSUN PLA+.json @@ -0,0 +1,52 @@ +{ + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "filament_cost": [ + "25.95" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_settings_id": [ + "eSUN PLA+" + ], + "filament_type": [ + "PLA+" + ], + "filament_vendor": [ + "eSUN" + ], + "from": "User", + "inherits": "My Generic PLA", + "is_custom_defined": "0", + "name": "eSUN PLA+", + "nozzle_temperature_initial_layer": [ + "225" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "pressure_advance": [ + "0.038" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "version": "2.1.1.0" +} diff --git a/machine/Croesus 0.4 nozzle.info b/machine/Croesus 0.4 nozzle.info new file mode 100644 index 0000000..722c4bf --- /dev/null +++ b/machine/Croesus 0.4 nozzle.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GM001 +updated_time = 1731239487 diff --git a/machine/Croesus 0.4 nozzle.json b/machine/Croesus 0.4 nozzle.json new file mode 100644 index 0000000..ac5324b --- /dev/null +++ b/machine/Croesus 0.4 nozzle.json @@ -0,0 +1,59 @@ +{ + "deretraction_speed": [ + "35" + ], + "emit_machine_limits_to_gcode": "0", + "from": "User", + "inherits": "MyKlipper 0.4 nozzle", + "is_custom_defined": "0", + "machine_end_gcode": "print_end", + "machine_max_acceleration_x": [ + "5000", + "20000" + ], + "machine_max_acceleration_y": [ + "5000", + "20000" + ], + "machine_max_acceleration_z": [ + "100", + "200" + ], + "machine_max_jerk_x": [ + "5", + "9" + ], + "machine_max_jerk_y": [ + "5", + "9" + ], + "machine_max_speed_x": [ + "180", + "200" + ], + "machine_max_speed_y": [ + "180", + "200" + ], + "machine_start_gcode": "M104 S0 ; Stops OrcaSlicer from sending temp waits separately\nM140 S0\nprint_start EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature]", + "name": "Croesus 0.4 nozzle", + "printable_area": [ + "0x0", + "230x0", + "230x210", + "0x210" + ], + "printable_height": "260", + "printer_settings_id": "Croesus 0.4 nozzle", + "retraction_length": [ + "0.5" + ], + "retraction_speed": [ + "35" + ], + "support_multi_bed_types": "1", + "version": "2.1.1.0", + "z_hop": [ + "0.2" + ] +} diff --git a/process/0.08mm Extra Fine @Croesus.info b/process/0.08mm Extra Fine @Croesus.info new file mode 100644 index 0000000..f3cdaab --- /dev/null +++ b/process/0.08mm Extra Fine @Croesus.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 1731907663 diff --git a/process/0.08mm Extra Fine @Croesus.json b/process/0.08mm Extra Fine @Croesus.json new file mode 100644 index 0000000..1e4f5da --- /dev/null +++ b/process/0.08mm Extra Fine @Croesus.json @@ -0,0 +1,46 @@ +{ + "bridge_acceleration": "500", + "brim_type": "no_brim", + "default_acceleration": "2000", + "filename_format": "{input_filename_base}.gcode", + "from": "User", + "fuzzy_skin_point_distance": "0.1", + "fuzzy_skin_thickness": "0.1", + "gap_infill_speed": "30", + "inherits": "0.08mm Extra Fine @MyKlipper", + "initial_layer_acceleration": "1000", + "initial_layer_infill_speed": "60", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "30", + "inner_wall_acceleration": "1000", + "inner_wall_speed": "80", + "internal_solid_infill_acceleration": "2500", + "internal_solid_infill_speed": "120", + "ironing_flow": "35%", + "ironing_spacing": "0.2", + "ironing_speed": "180", + "is_custom_defined": "0", + "name": "0.08mm Extra Fine @Croesus", + "only_one_wall_first_layer": "1", + "only_one_wall_top": "1", + "outer_wall_acceleration": "500", + "outer_wall_speed": "80", + "precise_outer_wall": "1", + "print_settings_id": "0.08mm Extra Fine @Croesus", + "skirt_height": "2", + "skirt_loops": "1", + "skirt_speed": "0", + "small_perimeter_speed": "30", + "sparse_infill_acceleration": "5000", + "sparse_infill_density": "40%", + "sparse_infill_line_width": "160%", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "180", + "support_speed": "120", + "top_surface_acceleration": "1000", + "top_surface_line_width": "100%", + "top_surface_speed": "60", + "travel_acceleration": "5000", + "travel_speed": "180", + "version": "2.1.1.0" +} diff --git a/process/0.12mm Fine @Croesus.info b/process/0.12mm Fine @Croesus.info new file mode 100644 index 0000000..8c5a8b8 --- /dev/null +++ b/process/0.12mm Fine @Croesus.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 1731931735 diff --git a/process/0.12mm Fine @Croesus.json b/process/0.12mm Fine @Croesus.json new file mode 100644 index 0000000..b928e39 --- /dev/null +++ b/process/0.12mm Fine @Croesus.json @@ -0,0 +1,48 @@ +{ + "bridge_acceleration": "500", + "brim_type": "no_brim", + "default_acceleration": "2000", + "filename_format": "{input_filename_base}.gcode", + "from": "User", + "fuzzy_skin_point_distance": "0.1", + "fuzzy_skin_thickness": "0.1", + "gap_infill_speed": "30", + "inherits": "0.12mm Fine @MyKlipper", + "initial_layer_acceleration": "1000", + "initial_layer_infill_speed": "60", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "30", + "inner_wall_acceleration": "1000", + "inner_wall_speed": "80", + "internal_solid_infill_acceleration": "2500", + "internal_solid_infill_speed": "120", + "ironing_flow": "35%", + "ironing_spacing": "0.2", + "ironing_speed": "180", + "is_custom_defined": "0", + "name": "0.12mm Fine @Croesus", + "only_one_wall_first_layer": "1", + "only_one_wall_top": "1", + "outer_wall_acceleration": "500", + "outer_wall_speed": "80", + "precise_outer_wall": "1", + "print_settings_id": "0.12mm Fine @Croesus", + "skirt_height": "2", + "skirt_loops": "1", + "skirt_speed": "0", + "small_perimeter_speed": "30", + "sparse_infill_acceleration": "5000", + "sparse_infill_density": "40%", + "sparse_infill_line_width": "160%", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "180", + "support_bottom_z_distance": "0.12", + "support_speed": "120", + "support_top_z_distance": "0.12", + "top_surface_acceleration": "1000", + "top_surface_line_width": "100%", + "top_surface_speed": "60", + "travel_acceleration": "5000", + "travel_speed": "180", + "version": "2.1.1.0" +} diff --git a/process/0.16mm Optimal @Croesus.info b/process/0.16mm Optimal @Croesus.info new file mode 100644 index 0000000..7a321de --- /dev/null +++ b/process/0.16mm Optimal @Croesus.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 1731284342 diff --git a/process/0.16mm Optimal @Croesus.json b/process/0.16mm Optimal @Croesus.json new file mode 100644 index 0000000..7ad1566 --- /dev/null +++ b/process/0.16mm Optimal @Croesus.json @@ -0,0 +1,46 @@ +{ + "bridge_acceleration": "500", + "brim_type": "no_brim", + "default_acceleration": "2000", + "filename_format": "{input_filename_base}.gcode", + "from": "User", + "fuzzy_skin_point_distance": "0.1", + "fuzzy_skin_thickness": "0.1", + "gap_infill_speed": "30", + "inherits": "0.16mm Optimal @MyKlipper", + "initial_layer_acceleration": "1000", + "initial_layer_infill_speed": "60", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "30", + "inner_wall_acceleration": "1000", + "inner_wall_speed": "80", + "internal_solid_infill_acceleration": "2500", + "internal_solid_infill_speed": "120", + "ironing_flow": "35%", + "ironing_spacing": "0.2", + "ironing_speed": "180", + "is_custom_defined": "0", + "name": "0.16mm Optimal @Croesus", + "only_one_wall_first_layer": "1", + "only_one_wall_top": "1", + "outer_wall_acceleration": "500", + "outer_wall_speed": "80", + "precise_outer_wall": "1", + "print_settings_id": "0.16mm Optimal @Croesus", + "skirt_height": "2", + "skirt_loops": "1", + "skirt_speed": "0", + "small_perimeter_speed": "30", + "sparse_infill_acceleration": "5000", + "sparse_infill_density": "40%", + "sparse_infill_line_width": "160%", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "180", + "support_speed": "120", + "top_surface_acceleration": "1000", + "top_surface_line_width": "100%", + "top_surface_speed": "60", + "travel_acceleration": "5000", + "travel_speed": "180", + "version": "2.1.1.0" +} diff --git a/process/0.20mm Standard @Croesus.info b/process/0.20mm Standard @Croesus.info new file mode 100644 index 0000000..711c3cf --- /dev/null +++ b/process/0.20mm Standard @Croesus.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 1731920483 diff --git a/process/0.20mm Standard @Croesus.json b/process/0.20mm Standard @Croesus.json new file mode 100644 index 0000000..b57ce27 --- /dev/null +++ b/process/0.20mm Standard @Croesus.json @@ -0,0 +1,46 @@ +{ + "bridge_acceleration": "500", + "brim_type": "no_brim", + "default_acceleration": "2000", + "filename_format": "{input_filename_base}.gcode", + "from": "User", + "fuzzy_skin_point_distance": "0.1", + "fuzzy_skin_thickness": "0.1", + "gap_infill_speed": "30", + "inherits": "0.20mm Standard @MyKlipper", + "initial_layer_acceleration": "1000", + "initial_layer_infill_speed": "60", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "30", + "inner_wall_acceleration": "1000", + "inner_wall_speed": "80", + "internal_solid_infill_acceleration": "2500", + "internal_solid_infill_speed": "120", + "ironing_flow": "35%", + "ironing_spacing": "0.2", + "ironing_speed": "180", + "is_custom_defined": "0", + "name": "0.20mm Standard @Croesus", + "only_one_wall_first_layer": "1", + "only_one_wall_top": "1", + "outer_wall_acceleration": "500", + "outer_wall_speed": "80", + "precise_outer_wall": "1", + "print_settings_id": "0.20mm Standard @Croesus", + "skirt_height": "2", + "skirt_loops": "1", + "skirt_speed": "0", + "small_perimeter_speed": "30", + "sparse_infill_acceleration": "5000", + "sparse_infill_density": "40%", + "sparse_infill_line_width": "160%", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "180", + "support_speed": "120", + "top_surface_acceleration": "1000", + "top_surface_line_width": "100%", + "top_surface_speed": "60", + "travel_acceleration": "5000", + "travel_speed": "180", + "version": "2.1.1.0" +} diff --git a/process/0.24mm Draft @Croesus.info b/process/0.24mm Draft @Croesus.info new file mode 100644 index 0000000..b2e5f71 --- /dev/null +++ b/process/0.24mm Draft @Croesus.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 1731983692 diff --git a/process/0.24mm Draft @Croesus.json b/process/0.24mm Draft @Croesus.json new file mode 100644 index 0000000..0edd0c4 --- /dev/null +++ b/process/0.24mm Draft @Croesus.json @@ -0,0 +1,48 @@ +{ + "bridge_acceleration": "500", + "brim_type": "no_brim", + "default_acceleration": "2000", + "filename_format": "{input_filename_base}.gcode", + "from": "User", + "fuzzy_skin_point_distance": "0.1", + "fuzzy_skin_thickness": "0.1", + "gap_infill_speed": "30", + "inherits": "0.24mm Draft @MyKlipper", + "initial_layer_acceleration": "1000", + "initial_layer_infill_speed": "60", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "30", + "inner_wall_acceleration": "1000", + "inner_wall_speed": "80", + "internal_solid_infill_acceleration": "2500", + "internal_solid_infill_speed": "120", + "ironing_flow": "35%", + "ironing_spacing": "0.2", + "ironing_speed": "180", + "is_custom_defined": "0", + "name": "0.24mm Draft @Croesus", + "only_one_wall_first_layer": "1", + "only_one_wall_top": "1", + "outer_wall_acceleration": "500", + "outer_wall_speed": "80", + "precise_outer_wall": "1", + "print_settings_id": "0.24mm Draft @Croesus", + "skirt_height": "2", + "skirt_loops": "1", + "skirt_speed": "0", + "small_perimeter_speed": "30", + "sparse_infill_acceleration": "5000", + "sparse_infill_density": "40%", + "sparse_infill_line_width": "160%", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "180", + "support_bottom_z_distance": "0.24", + "support_speed": "120", + "support_top_z_distance": "0.24", + "top_surface_acceleration": "1000", + "top_surface_line_width": "100%", + "top_surface_speed": "60", + "travel_acceleration": "5000", + "travel_speed": "180", + "version": "2.1.1.0" +} diff --git a/process/0.28mm Extra Draft @Croesus.info b/process/0.28mm Extra Draft @Croesus.info new file mode 100644 index 0000000..b2e5f71 --- /dev/null +++ b/process/0.28mm Extra Draft @Croesus.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 1731983692 diff --git a/process/0.28mm Extra Draft @Croesus.json b/process/0.28mm Extra Draft @Croesus.json new file mode 100644 index 0000000..dd98ca5 --- /dev/null +++ b/process/0.28mm Extra Draft @Croesus.json @@ -0,0 +1,48 @@ +{ + "bridge_acceleration": "500", + "brim_type": "no_brim", + "default_acceleration": "2000", + "filename_format": "{input_filename_base}.gcode", + "from": "User", + "fuzzy_skin_point_distance": "0.1", + "fuzzy_skin_thickness": "0.1", + "gap_infill_speed": "30", + "inherits": "0.28mm Extra Draft @MyKlipper", + "initial_layer_acceleration": "1000", + "initial_layer_infill_speed": "60", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "30", + "inner_wall_acceleration": "1000", + "inner_wall_speed": "80", + "internal_solid_infill_acceleration": "2500", + "internal_solid_infill_speed": "120", + "ironing_flow": "35%", + "ironing_spacing": "0.2", + "ironing_speed": "180", + "is_custom_defined": "0", + "name": "0.28mm Extra Draft @Croesus", + "only_one_wall_first_layer": "1", + "only_one_wall_top": "1", + "outer_wall_acceleration": "500", + "outer_wall_speed": "80", + "precise_outer_wall": "1", + "print_settings_id": "0.28mm Extra Draft @Croesus", + "skirt_height": "2", + "skirt_loops": "1", + "skirt_speed": "0", + "small_perimeter_speed": "30", + "sparse_infill_acceleration": "5000", + "sparse_infill_density": "40%", + "sparse_infill_line_width": "160%", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "180", + "support_bottom_z_distance": "0.28", + "support_speed": "120", + "support_top_z_distance": "0.28", + "top_surface_acceleration": "1000", + "top_surface_line_width": "100%", + "top_surface_speed": "60", + "travel_acceleration": "5000", + "travel_speed": "180", + "version": "2.1.1.0" +}