diff --git a/filament/eSUN PETG 0.4 nozzle.info b/filament/eSUN PETG 0.4 nozzle @Croesus.info similarity index 78% rename from filament/eSUN PETG 0.4 nozzle.info rename to filament/eSUN PETG 0.4 nozzle @Croesus.info index 7e78923..c64d333 100644 --- a/filament/eSUN PETG 0.4 nozzle.info +++ b/filament/eSUN PETG 0.4 nozzle @Croesus.info @@ -1,4 +1,4 @@ -sync_info = update +sync_info = create user_id = setting_id = base_id = GFSA04 diff --git a/filament/eSUN PETG 0.4 nozzle.json b/filament/eSUN PETG 0.4 nozzle @Croesus.json similarity index 91% rename from filament/eSUN PETG 0.4 nozzle.json rename to filament/eSUN PETG 0.4 nozzle @Croesus.json index e946c73..088beb5 100644 --- a/filament/eSUN PETG 0.4 nozzle.json +++ b/filament/eSUN PETG 0.4 nozzle @Croesus.json @@ -18,7 +18,7 @@ "12" ], "filament_settings_id": [ - "eSUN PETG 0.4 nozzle" + "eSUN PETG 0.4 nozzle @Croesus" ], "filament_vendor": [ "eSUN" @@ -26,7 +26,7 @@ "from": "User", "inherits": "My Generic PETG", "is_custom_defined": "0", - "name": "eSUN PETG 0.4 nozzle", + "name": "eSUN PETG 0.4 nozzle @Croesus", "nozzle_temperature": [ "245" ], diff --git a/filament/eSUN PETG 0.6 nozzle.info b/filament/eSUN PETG 0.6 nozzle @Croesus.info similarity index 78% rename from filament/eSUN PETG 0.6 nozzle.info rename to filament/eSUN PETG 0.6 nozzle @Croesus.info index 7e78923..c64d333 100644 --- a/filament/eSUN PETG 0.6 nozzle.info +++ b/filament/eSUN PETG 0.6 nozzle @Croesus.info @@ -1,4 +1,4 @@ -sync_info = update +sync_info = create user_id = setting_id = base_id = GFSA04 diff --git a/filament/eSUN PETG 0.6 nozzle.json b/filament/eSUN PETG 0.6 nozzle @Croesus.json similarity index 91% rename from filament/eSUN PETG 0.6 nozzle.json rename to filament/eSUN PETG 0.6 nozzle @Croesus.json index f50468f..c54c993 100644 --- a/filament/eSUN PETG 0.6 nozzle.json +++ b/filament/eSUN PETG 0.6 nozzle @Croesus.json @@ -18,7 +18,7 @@ "12" ], "filament_settings_id": [ - "eSUN PETG 0.6 nozzle" + "eSUN PETG 0.6 nozzle @Croesus" ], "filament_vendor": [ "eSUN" @@ -26,7 +26,7 @@ "from": "User", "inherits": "My Generic PETG", "is_custom_defined": "0", - "name": "eSUN PETG 0.6 nozzle", + "name": "eSUN PETG 0.6 nozzle @Croesus", "nozzle_temperature": [ "245" ], diff --git a/filament/eSUN PLA+ 0.4 nozzle.info b/filament/eSUN PLA+ 0.4 nozzle @Croesus.info similarity index 78% rename from filament/eSUN PLA+ 0.4 nozzle.info rename to filament/eSUN PLA+ 0.4 nozzle @Croesus.info index 18d3c0c..e646b26 100644 --- a/filament/eSUN PLA+ 0.4 nozzle.info +++ b/filament/eSUN PLA+ 0.4 nozzle @Croesus.info @@ -1,4 +1,4 @@ -sync_info = update +sync_info = create user_id = setting_id = base_id = GFSA04 diff --git a/filament/eSUN PLA+ 0.4 nozzle.json b/filament/eSUN PLA+ 0.4 nozzle @Croesus.json similarity index 92% rename from filament/eSUN PLA+ 0.4 nozzle.json rename to filament/eSUN PLA+ 0.4 nozzle @Croesus.json index 39bcc90..cdc1da9 100644 --- a/filament/eSUN PLA+ 0.4 nozzle.json +++ b/filament/eSUN PLA+ 0.4 nozzle @Croesus.json @@ -27,7 +27,7 @@ "28" ], "filament_settings_id": [ - "eSUN PLA+ 0.4 nozzle" + "eSUN PLA+ 0.4 nozzle @Croesus" ], "filament_type": [ "PLA+" @@ -38,7 +38,7 @@ "from": "User", "inherits": "My Generic PLA", "is_custom_defined": "0", - "name": "eSUN PLA+ 0.4 nozzle", + "name": "eSUN PLA+ 0.4 nozzle @Croesus", "nozzle_temperature_range_low": [ "210" ], diff --git a/filament/eSUN PLA+ 0.4 nozzle @TzKal-Zuk.info b/filament/eSUN PLA+ 0.4 nozzle @TzKal-Zuk.info new file mode 100644 index 0000000..e648a33 --- /dev/null +++ b/filament/eSUN PLA+ 0.4 nozzle @TzKal-Zuk.info @@ -0,0 +1,5 @@ +sync_info = create +user_id = +setting_id = +base_id = GFSL99_00 +updated_time = 1734112221 diff --git a/filament/eSUN PLA+ 0.4 nozzle @TzKal-Zuk.json b/filament/eSUN PLA+ 0.4 nozzle @TzKal-Zuk.json new file mode 100644 index 0000000..493c9ad --- /dev/null +++ b/filament/eSUN PLA+ 0.4 nozzle @TzKal-Zuk.json @@ -0,0 +1,16 @@ +{ + "filament_settings_id": [ + "eSUN PLA+ 0.4 nozzle @TzKal-Zuk" + ], + "from": "User", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Creality Generic PLA @Ender-3V3-all", + "is_custom_defined": "0", + "name": "eSUN PLA+ 0.4 nozzle @TzKal-Zuk", + "version": "2.2.0.4" +} diff --git a/filament/eSUN PLA+ 0.6 nozzle.info b/filament/eSUN PLA+ 0.6 nozzle @Croesus.info similarity index 78% rename from filament/eSUN PLA+ 0.6 nozzle.info rename to filament/eSUN PLA+ 0.6 nozzle @Croesus.info index 18d3c0c..e646b26 100644 --- a/filament/eSUN PLA+ 0.6 nozzle.info +++ b/filament/eSUN PLA+ 0.6 nozzle @Croesus.info @@ -1,4 +1,4 @@ -sync_info = update +sync_info = create user_id = setting_id = base_id = GFSA04 diff --git a/filament/eSUN PLA+ 0.6 nozzle.json b/filament/eSUN PLA+ 0.6 nozzle @Croesus.json similarity index 92% rename from filament/eSUN PLA+ 0.6 nozzle.json rename to filament/eSUN PLA+ 0.6 nozzle @Croesus.json index a5a8d82..0646e2b 100644 --- a/filament/eSUN PLA+ 0.6 nozzle.json +++ b/filament/eSUN PLA+ 0.6 nozzle @Croesus.json @@ -27,7 +27,7 @@ "32" ], "filament_settings_id": [ - "eSUN PLA+ 0.6 nozzle" + "eSUN PLA+ 0.6 nozzle @Croesus" ], "filament_type": [ "PLA+" @@ -38,7 +38,7 @@ "from": "User", "inherits": "My Generic PLA", "is_custom_defined": "0", - "name": "eSUN PLA+ 0.6 nozzle", + "name": "eSUN PLA+ 0.6 nozzle @Croesus", "nozzle_temperature_range_low": [ "210" ], diff --git a/machine/Creality Ender-3 V3 SE 0.4 nozzle @Helwyr.info b/machine/TzKal-Zuk 0.4 nozzle.info similarity index 77% rename from machine/Creality Ender-3 V3 SE 0.4 nozzle @Helwyr.info rename to machine/TzKal-Zuk 0.4 nozzle.info index d7d3a85..29b4daa 100644 --- a/machine/Creality Ender-3 V3 SE 0.4 nozzle @Helwyr.info +++ b/machine/TzKal-Zuk 0.4 nozzle.info @@ -1,4 +1,4 @@ -sync_info = update +sync_info = create user_id = setting_id = base_id = GM001 diff --git a/machine/Creality Ender-3 V3 SE 0.4 nozzle @Helwyr.json b/machine/TzKal-Zuk 0.4 nozzle.json similarity index 85% rename from machine/Creality Ender-3 V3 SE 0.4 nozzle @Helwyr.json rename to machine/TzKal-Zuk 0.4 nozzle.json index 56c1089..ab94c32 100644 --- a/machine/Creality Ender-3 V3 SE 0.4 nozzle @Helwyr.json +++ b/machine/TzKal-Zuk 0.4 nozzle.json @@ -6,13 +6,19 @@ "inherits": "Creality Ender-3 V3 SE 0.4 nozzle", "is_custom_defined": "0", "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \nM413 S0;Disables power loss recovery\n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nM420 S1 ;Enable mesh leveling\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", - "name": "Creality Ender-3 V3 SE 0.4 nozzle @Helwyr", - "printer_settings_id": "Creality Ender-3 V3 SE 0.4 nozzle @Helwyr", + "name": "TzKal-Zuk 0.4 nozzle", + "printer_settings_id": "TzKal-Zuk 0.4 nozzle", "retraction_length": [ "0.8" ], "retraction_speed": [ "35" ], - "version": "2.2.0.4" + "version": "2.2.0.4", + "wipe": [ + "0" + ], + "z_hop": [ + "0.2" + ] } diff --git a/process/0.08mm Extra Fine @Croesus.json b/process/0.08mm Extra Fine @Croesus.json index 281a85c..36ec9fd 100644 --- a/process/0.08mm Extra Fine @Croesus.json +++ b/process/0.08mm Extra Fine @Croesus.json @@ -11,7 +11,8 @@ "initial_layer_infill_speed": "60", "initial_layer_print_height": "0.28", "initial_layer_speed": "30", - "inner_wall_speed": "140", + "inner_wall_acceleration": "2000", + "inner_wall_speed": "120", "internal_solid_infill_pattern": "monotonicline", "ironing_flow": "35%", "ironing_spacing": "0.2", @@ -20,7 +21,8 @@ "name": "0.08mm Extra Fine @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_speed": "140", + "outer_wall_acceleration": "1000", + "outer_wall_speed": "80", "precise_outer_wall": "1", "print_settings_id": "0.08mm Extra Fine @Croesus", "skirt_height": "2", @@ -33,6 +35,7 @@ "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "300", "support_speed": "120", + "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", "travel_speed": "450", diff --git a/process/0.12mm Fine @Croesus.json b/process/0.12mm Fine @Croesus.json index 392547f..fcd53a5 100644 --- a/process/0.12mm Fine @Croesus.json +++ b/process/0.12mm Fine @Croesus.json @@ -11,7 +11,8 @@ "initial_layer_infill_speed": "60", "initial_layer_print_height": "0.28", "initial_layer_speed": "30", - "inner_wall_speed": "140", + "inner_wall_acceleration": "2000", + "inner_wall_speed": "120", "internal_solid_infill_pattern": "monotonicline", "ironing_flow": "35%", "ironing_spacing": "0.2", @@ -20,7 +21,8 @@ "name": "0.12mm Fine @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_speed": "140", + "outer_wall_acceleration": "1000", + "outer_wall_speed": "80", "precise_outer_wall": "1", "print_settings_id": "0.12mm Fine @Croesus", "skirt_height": "2", @@ -33,6 +35,7 @@ "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "300", "support_speed": "120", + "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", "travel_speed": "450", diff --git a/process/0.20mm Standard @Helwyr.info b/process/0.12mm Fine @TzKal-Zuk.info similarity index 100% rename from process/0.20mm Standard @Helwyr.info rename to process/0.12mm Fine @TzKal-Zuk.info diff --git a/process/0.12mm Fine @TzKal-Zuk.json b/process/0.12mm Fine @TzKal-Zuk.json new file mode 100644 index 0000000..78908db --- /dev/null +++ b/process/0.12mm Fine @TzKal-Zuk.json @@ -0,0 +1,49 @@ +{ + "bottom_solid_infill_flow_ratio": "1.05", + "bottom_surface_pattern": "monotonicline", + "bridge_flow": "1", + "bridge_speed": "60", + "detect_thin_wall": "0", + "enable_overhang_speed": "0", + "from": "User", + "gap_infill_speed": "15", + "inherits": "0.12mm Fine @Creality Ender3V3SE 0.4", + "initial_layer_infill_speed": "30", + "initial_layer_line_width": "120%", + "initial_layer_print_height": "0.28", + "initial_layer_speed": "15", + "inner_wall_acceleration": "1000", + "inner_wall_line_width": "110%", + "inner_wall_speed": "60", + "internal_bridge_speed": "80", + "internal_solid_infill_line_width": "120%", + "internal_solid_infill_pattern": "monotonicline", + "internal_solid_infill_speed": "100", + "is_custom_defined": "0", + "line_width": "110%", + "max_volumetric_extrusion_rate_slope": "15", + "name": "0.12mm Fine @TzKal-Zuk", + "only_one_wall_first_layer": "1", + "only_one_wall_top": "1", + "outer_wall_acceleration": "500", + "outer_wall_line_width": "100%", + "outer_wall_speed": "40", + "precise_outer_wall": "1", + "print_settings_id": "0.12mm Fine @TzKal-Zuk", + "skirt_loops": "1", + "small_perimeter_speed": "15", + "sparse_infill_acceleration": "200%", + "sparse_infill_density": "40%", + "sparse_infill_line_width": "160%", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "150", + "support_line_width": "96%", + "support_speed": "60", + "top_surface_acceleration": "1000", + "top_surface_line_width": "100%", + "top_surface_speed": "30", + "travel_acceleration": "3500", + "version": "2.2.0.4", + "wall_generator": "classic", + "wall_loops": "3" +} diff --git a/process/0.16mm Optimal @TzKal-Zuk.info b/process/0.16mm Optimal @TzKal-Zuk.info new file mode 100644 index 0000000..fe5d222 --- /dev/null +++ b/process/0.16mm Optimal @TzKal-Zuk.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 0 diff --git a/process/0.16mm Optimal @TzKal-Zuk.json b/process/0.16mm Optimal @TzKal-Zuk.json new file mode 100644 index 0000000..d627149 --- /dev/null +++ b/process/0.16mm Optimal @TzKal-Zuk.json @@ -0,0 +1,49 @@ +{ + "bottom_solid_infill_flow_ratio": "1.05", + "bottom_surface_pattern": "monotonicline", + "bridge_flow": "1", + "bridge_speed": "60", + "detect_thin_wall": "0", + "enable_overhang_speed": "0", + "from": "User", + "gap_infill_speed": "15", + "inherits": "0.16mm Optimal @Creality Ender3V3SE 0.4", + "initial_layer_infill_speed": "30", + "initial_layer_line_width": "120%", + "initial_layer_print_height": "0.28", + "initial_layer_speed": "15", + "inner_wall_acceleration": "1000", + "inner_wall_line_width": "110%", + "inner_wall_speed": "60", + "internal_bridge_speed": "80", + "internal_solid_infill_line_width": "120%", + "internal_solid_infill_pattern": "monotonicline", + "internal_solid_infill_speed": "100", + "is_custom_defined": "0", + "line_width": "110%", + "max_volumetric_extrusion_rate_slope": "15", + "name": "0.16mm Optimal @TzKal-Zuk", + "only_one_wall_first_layer": "1", + "only_one_wall_top": "1", + "outer_wall_acceleration": "500", + "outer_wall_line_width": "100%", + "outer_wall_speed": "40", + "precise_outer_wall": "1", + "print_settings_id": "0.16mm Optimal @TzKal-Zuk", + "skirt_loops": "1", + "small_perimeter_speed": "15", + "sparse_infill_acceleration": "200%", + "sparse_infill_density": "40%", + "sparse_infill_line_width": "160%", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "150", + "support_line_width": "96%", + "support_speed": "60", + "top_surface_acceleration": "1000", + "top_surface_line_width": "100%", + "top_surface_speed": "30", + "travel_acceleration": "3500", + "version": "2.2.0.4", + "wall_generator": "classic", + "wall_loops": "3" +} diff --git a/process/0.20mm Standard @Croesus.json b/process/0.20mm Standard @Croesus.json index 9b50841..62c9ffe 100644 --- a/process/0.20mm Standard @Croesus.json +++ b/process/0.20mm Standard @Croesus.json @@ -11,7 +11,8 @@ "initial_layer_infill_speed": "60", "initial_layer_print_height": "0.28", "initial_layer_speed": "30", - "inner_wall_speed": "140", + "inner_wall_acceleration": "2000", + "inner_wall_speed": "120", "internal_solid_infill_pattern": "monotonicline", "ironing_flow": "35%", "ironing_spacing": "0.2", @@ -20,7 +21,8 @@ "name": "0.20mm Standard @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_speed": "140", + "outer_wall_acceleration": "1000", + "outer_wall_speed": "80", "precise_outer_wall": "1", "print_settings_id": "0.20mm Standard @Croesus", "skirt_height": "2", @@ -33,6 +35,7 @@ "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "300", "support_speed": "120", + "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", "travel_speed": "450", diff --git a/process/0.20mm Standard @TzKal-Zuk.info b/process/0.20mm Standard @TzKal-Zuk.info new file mode 100644 index 0000000..461835d --- /dev/null +++ b/process/0.20mm Standard @TzKal-Zuk.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 1733885975 diff --git a/process/0.20mm Standard @Helwyr.json b/process/0.20mm Standard @TzKal-Zuk.json similarity index 54% rename from process/0.20mm Standard @Helwyr.json rename to process/0.20mm Standard @TzKal-Zuk.json index 0b5fff8..ed31a73 100644 --- a/process/0.20mm Standard @Helwyr.json +++ b/process/0.20mm Standard @TzKal-Zuk.json @@ -1,38 +1,50 @@ { "bottom_shell_layers": "3", + "bottom_solid_infill_flow_ratio": "1.05", "bottom_surface_pattern": "monotonicline", "bridge_flow": "1", + "bridge_speed": "60", "detect_thin_wall": "0", + "enable_overhang_speed": "0", "from": "User", - "gap_infill_speed": "20", + "gap_infill_speed": "15", "inherits": "0.20mm Standard @Creality Ender3V3SE 0.4", - "initial_layer_infill_speed": "60", + "initial_layer_infill_speed": "30", "initial_layer_line_width": "120%", "initial_layer_print_height": "0.28", + "initial_layer_speed": "15", + "inner_wall_acceleration": "1000", "inner_wall_line_width": "110%", - "inner_wall_speed": "80", + "inner_wall_speed": "60", + "internal_bridge_speed": "80", "internal_solid_infill_line_width": "120%", "internal_solid_infill_pattern": "monotonicline", - "internal_solid_infill_speed": "120", + "internal_solid_infill_speed": "100", "is_custom_defined": "0", "line_width": "110%", + "max_volumetric_extrusion_rate_slope": "15", "minimum_sparse_infill_area": "15", - "name": "0.20mm Standard @Helwyr", + "name": "0.20mm Standard @TzKal-Zuk", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", + "outer_wall_acceleration": "500", "outer_wall_line_width": "100%", + "outer_wall_speed": "40", "precise_outer_wall": "1", - "print_settings_id": "0.20mm Standard @Helwyr", + "print_settings_id": "0.20mm Standard @TzKal-Zuk", "skirt_loops": "1", - "small_perimeter_speed": "20", + "small_perimeter_speed": "15", + "sparse_infill_acceleration": "200%", "sparse_infill_density": "40%", "sparse_infill_line_width": "160%", "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "120", + "sparse_infill_speed": "150", "support_line_width": "96%", - "support_speed": "120", + "support_speed": "60", + "top_surface_acceleration": "1000", "top_surface_line_width": "100%", - "top_surface_speed": "40", + "top_surface_speed": "30", + "travel_acceleration": "3500", "version": "2.2.0.4", "wall_generator": "classic", "wall_loops": "3" diff --git a/process/0.24mm Draft @Croesus.json b/process/0.24mm Draft @Croesus.json index f3f4e45..3acdd83 100644 --- a/process/0.24mm Draft @Croesus.json +++ b/process/0.24mm Draft @Croesus.json @@ -11,7 +11,8 @@ "initial_layer_infill_speed": "60", "initial_layer_print_height": "0.28", "initial_layer_speed": "30", - "inner_wall_speed": "140", + "inner_wall_acceleration": "2000", + "inner_wall_speed": "120", "internal_solid_infill_pattern": "monotonicline", "ironing_flow": "35%", "ironing_spacing": "0.2", @@ -20,7 +21,8 @@ "name": "0.24mm Draft @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_speed": "140", + "outer_wall_acceleration": "1000", + "outer_wall_speed": "80", "precise_outer_wall": "1", "print_settings_id": "0.24mm Draft @Croesus", "skirt_height": "2", @@ -33,6 +35,7 @@ "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "300", "support_speed": "120", + "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", "travel_speed": "450", diff --git a/process/0.24mm Draft @TzKal-Zuk.info b/process/0.24mm Draft @TzKal-Zuk.info new file mode 100644 index 0000000..fe5d222 --- /dev/null +++ b/process/0.24mm Draft @TzKal-Zuk.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 0 diff --git a/process/0.24mm Draft @TzKal-Zuk.json b/process/0.24mm Draft @TzKal-Zuk.json new file mode 100644 index 0000000..977a5ef --- /dev/null +++ b/process/0.24mm Draft @TzKal-Zuk.json @@ -0,0 +1,49 @@ +{ + "bottom_solid_infill_flow_ratio": "1.05", + "bottom_surface_pattern": "monotonicline", + "bridge_flow": "1", + "bridge_speed": "60", + "detect_thin_wall": "0", + "enable_overhang_speed": "0", + "from": "User", + "gap_infill_speed": "15", + "inherits": "0.24mm Draft @Creality Ender3V3SE 0.4", + "initial_layer_infill_speed": "30", + "initial_layer_line_width": "120%", + "initial_layer_print_height": "0.28", + "initial_layer_speed": "15", + "inner_wall_acceleration": "1000", + "inner_wall_line_width": "110%", + "inner_wall_speed": "60", + "internal_bridge_speed": "80", + "internal_solid_infill_line_width": "120%", + "internal_solid_infill_pattern": "monotonicline", + "internal_solid_infill_speed": "100", + "is_custom_defined": "0", + "line_width": "110%", + "max_volumetric_extrusion_rate_slope": "15", + "name": "0.24mm Draft @TzKal-Zuk", + "only_one_wall_first_layer": "1", + "only_one_wall_top": "1", + "outer_wall_acceleration": "500", + "outer_wall_line_width": "100%", + "outer_wall_speed": "40", + "precise_outer_wall": "1", + "print_settings_id": "0.24mm Draft @TzKal-Zuk", + "skirt_loops": "1", + "small_perimeter_speed": "15", + "sparse_infill_acceleration": "200%", + "sparse_infill_density": "40%", + "sparse_infill_line_width": "160%", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "150", + "support_line_width": "96%", + "support_speed": "60", + "top_surface_acceleration": "1000", + "top_surface_line_width": "100%", + "top_surface_speed": "30", + "travel_acceleration": "3500", + "version": "2.2.0.4", + "wall_generator": "classic", + "wall_loops": "3" +} diff --git a/process/0.28mm Extra Draft @Croesus.info b/process/0.28mm Extra Draft @Croesus.info index b2e5f71..55e69c9 100644 --- a/process/0.28mm Extra Draft @Croesus.info +++ b/process/0.28mm Extra Draft @Croesus.info @@ -2,4 +2,4 @@ sync_info = update user_id = setting_id = base_id = GP004 -updated_time = 1731983692 +updated_time = 1734112221 diff --git a/process/0.28mm Extra Draft @Croesus.json b/process/0.28mm Extra Draft @Croesus.json index dd92eab..0af09da 100644 --- a/process/0.28mm Extra Draft @Croesus.json +++ b/process/0.28mm Extra Draft @Croesus.json @@ -11,7 +11,8 @@ "initial_layer_infill_speed": "60", "initial_layer_print_height": "0.28", "initial_layer_speed": "30", - "inner_wall_speed": "140", + "inner_wall_acceleration": "2000", + "inner_wall_speed": "120", "internal_solid_infill_pattern": "monotonicline", "ironing_flow": "35%", "ironing_spacing": "0.2", @@ -20,7 +21,8 @@ "name": "0.28mm Extra Draft @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_speed": "140", + "outer_wall_acceleration": "1000", + "outer_wall_speed": "80", "precise_outer_wall": "1", "print_settings_id": "0.28mm Extra Draft @Croesus", "skirt_height": "2", @@ -33,9 +35,10 @@ "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "300", "support_speed": "120", + "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", "travel_speed": "450", - "version": "2.1.1.0", + "version": "2.2.0.4", "wall_generator": "classic" } diff --git a/process/0.32mm Standard @Croesus.json b/process/0.32mm Standard @Croesus.json index e08db06..9709261 100644 --- a/process/0.32mm Standard @Croesus.json +++ b/process/0.32mm Standard @Croesus.json @@ -11,7 +11,8 @@ "initial_layer_infill_speed": "60", "initial_layer_print_height": "0.28", "initial_layer_speed": "30", - "inner_wall_speed": "140", + "inner_wall_acceleration": "2000", + "inner_wall_speed": "120", "internal_solid_infill_pattern": "monotonicline", "ironing_flow": "35%", "ironing_spacing": "0.2", @@ -20,7 +21,8 @@ "name": "0.32mm Standard @Croesus", "only_one_wall_first_layer": "1", "only_one_wall_top": "1", - "outer_wall_speed": "140", + "outer_wall_acceleration": "1000", + "outer_wall_speed": "80", "precise_outer_wall": "1", "print_settings_id": "0.32mm Standard @Croesus", "skirt_height": "2", @@ -33,6 +35,7 @@ "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "300", "support_speed": "120", + "top_surface_acceleration": "2000", "top_surface_line_width": "100%", "top_surface_speed": "60", "travel_speed": "450",